• Journal of the Mineralogical Society of Korea
• /
• v.28 no.1
• /
• pp.9-16
• /
• 2015

A mineralogical analysis on the factors affecting the luster of pearls was carried out using gravity measurement, optical microscope observation, X-ray diffraction analysis, and scanning electron microscopy. We divided the seawater cultured pearls from Tongyeong into the following four types based on luster and shape; good luster and round (LR), lackluster and round (LLR), lackluster and baroque (LLB), and lackluster and two nucleus (LTN) pearls. Pearls with high-quality luster had slightly lower specific gravity as compared to pearls with low-quality luster, but both these types of pearls are within the specific gravity range of commercial pearls. Regarding the cross-sectional thickness of the mother-of-pearl layer, LR pearls showed a uniform thickness of about 0.3 mm in average. On the other hand, LLR pearls were characterized by relatively thinner, but uniform thickness. LTN and LLB pearls showed a tendency of significantly large variation in thickness even within a single pearl. For the surface of pearls, pearls with high-quality luster showed narrower and clearer growth lines of aragonite crystals as compared to pearls with low-quality luster. Pearls with high-quality luster were characterized by fewer aragonite crystal lattice defects as compared to pearls with low-quality luster, and the former showed parallel arrangement, thinner thickness, and less difference in thickness on the surface and inside. If a pearl has a prismatic layer, it is composed of aragonite with calcite in the prismatic and nacreous layer, and calcite content is very high in the lackluster pearl. Pearls without a prismatic layer were devoid of calcite irrespective of their quality of luster, and were composed of aragonite.

• Journal of the Korea Computer Graphics Society
• /
• v.24 no.3
• /
• pp.33-41
• /
• 2018

We present a secondary camera optimization method that helps the user exploring 3D virtual environment to precisely observe possible collisions between objects. The first role of our secondary camera is to automatically detect the area with the greatest possible collision. The second role is to show the detected area from a new angle of view that the current main camera cannot show. However, as the shapes of target objects are complex, the shape of the empty space between objects is also complex and narrow. It means that the space for the secondary camera position is highly constrained and its optimization can be very difficult. To avoid this difficulty and increase the efficiency of the optimization, we first compute a bisector surface between two target objects. Then, we limit the domain of the secondary camera's position on the bisector surface in the optimization process. To verify the utility of our method, we built a demonstration program in which the user can explore in a 3D virtual world and interact with objects by using a hand motion recognition device and conducted a user study.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.1
• /
• pp.40-47
• /
• 2016

Instead of metal connector generally used on the structural glued laminated timber rahmen joints, the GFRP reinforced laminated plates combining veneer and GFRP (Glass Fiber Reinforced Plastic) and bonded type GFRP rod were used as the connectors. As a result of moment resistance performance evaluation on the joint part applied with these connectors, the yield moment of specimen using the GFRP reinforced laminated plates and GFRP rod pin was measured 4 % lower in comparison to the specimen (Type-1) using the metal connectors, but the initial rotational stiffness was measured 29% higher. Also, the yield moment and rotational stiffness of the specimen using the GFRP-reinforced laminated plates and wood (Eucalyptus marginata) pin showed were measured 11% and 56% higher in comparison to the Type-1 specimen, showing the best performance. It was also confirmed through the failure shape and perfect elasto-plasticity analysis that it showed ductility behavior, not brittle fracture, from the shear resisting force by the pin and the bonding strength increased and the unification of member was carried out. On the other hand, in case of the specimen bonded with GFRP rod, it was impossible to measure the bonding performance or it was measured very low due to poor bonding.

• Proceedings of the KSPS conference
• /
• 1997.07a
• /
• pp.11-25
• /
• 1997

This presentation will focus on building basic English Prosodic Skills which are very useful and helpful for Japanese learners of English. The focus first will be on recognizing the seven basic nuclear tones, analysing intonation structures, distinguishing intonation patterns and then on the way of improving speaking ability using sufficient verbal contents of intonation (mini-dialogue). My presentation deals mainly with some difficulties which Japanese learners of English have in the field of RP intonation, It is chiefly concerned with identifying, describing and analysing tone-group sequences. It sometimes happens that Japanese learners of English can pronounce isolated bounds correctly and read phonetic symbols sufficiently, bet have difficult problems in carrying out accurate prosodic features. The use of wrong intonation is sometimes the cause of misunderstanding of speaker's attitude, connotation and shades of meaning, etc.. However accurately students can pronounce the nuclear tone or tone-group of English, they have to learn how to connect tone-groups properly for suitable sequences in respect to meaning or implication. We are faced with the complicated theory of RF intonation on the one hand and difficult realization of it on the other. Japanese learners of English have special difficulties in employing "rising tune" and "falling + rising tune". If students are taught pitch movements by indicating dots graphically between two horizontal lines, they can easily understand the whole shape of pitch movements. In this presentation, I illuminate several tone-group sequences which are very useful for Japanese learning English intonation. Among them, four similar Pitch Patterns, such as, (1) (equation omitted)- type, (2) (equation omitted) - type, (3) (equation omitted) - type and (4) (Rising Head) (equation omitted)- type are clarified and other important tone-group sequences aye also highlighted from the point of view of teaching English as a foreign language. The intonation theory, tone marks and technical terms are, in all essentials, those of Intonation of Colloquial English by O'Connor, J. D. and Arnold, G. F., Longman, 2nd ed., 1982. The changes of tone are shown graphically between two horizontal lines representing the ordinary high and low zones of the utterance. A.C.Gimson (1981:314) : The intonation of English has been studied in greater detail and for longer than that of any other language. No definitive analysis, classifying the features of RP intonation, has yet appeared (though that presented by O'Connor and Arnold (1973) provides the most comprehensive and useful account from the foreign learner's point of view).

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.5
• /
• pp.533-541
• /
• 2007

The Zienkiewicz-Zhu(Z/Z) error estimate is slightly modified for the hierarchical p-refinement, and is then applied to L-shaped plates subjected to bending to demonstrate its effectiveness. An adaptive procedure in finite element analysis is presented by p-refinement of meshes in conjunction with a posteriori error estimator that is based on the superconvergent patch recovery(SPR) technique. The modified Z/Z error estimate p-refinement is different from the conventional approach because the high order shape functions based on integrals of Legendre polynomials are used to interpolate displacements within an element, on the other hand, the same order of basis function based on Pascal's triangle tree is also used to interpolate recovered stresses. The least-square method is used to fit a polynomial to the stresses computed at the sampling points. The strategy of finding a nearly optimal distribution of polynomial degrees on a fixed finite element mesh is discussed such that a particular element has to be refined automatically to obtain an acceptable level of accuracy by increasing p-levels non-uniformly or selectively. It is noted that the error decreases rapidly with an increase in the number of degrees of freedom and the sequences of p-distributions obtained by the proposed error indicator closely follow the optimal trajectory.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.23-23
• /
• 2003

Chestnut blight, caused by Cryphonectria parasitica, is the most destructive disease of American and European chestnut trees. A total of 672 C prasitica was isolated from blight lesion on chestnut twigs, which were collected from major chestnut plantations all over Korea in 1999. Isolation rates were over 30% in Kyunggj-, Kyongnam-, and Chonnam-do. The highest isolation rate was 37.4% and recorded in Kyongnam-do. On the other hand, Chonbuk-do had the lowest isolation rate as 13.5%. In grouping of C parasitica by colony shape and color, yellow colony with irregular margin were the most dominant colony type with a frequency of 65.2%. When the 672 isolates were inoculated on the chestnut twigs, 380 isolates (56.5%) caused lesions larger than the standard virulent isolate EP155-2, while 158 isolates (23.4%) caused smaller lesions than the standard hypovirulent isolate UEP-1. In Bavendamm test that determines phenol oxidase activity, 97.1% of all the isolates resulted the same or darker discoloration than EP155-2, and only 12.2% resulted the same or lighter discoloration than UEP-1. In the vegetative compatibility (VC) tests, total 670 isolates were divided into 121 VC groups (VCGs). Kyongnam-, Chonnam-, and Chungnam-do, the three principal chestnut plantation area, had 49, 33, and 27 VCGs, respectively. Among the VCGs, the biggest VCG, KR-VC104, was composed of 164 isolates and the second biggest VCG had 62 isolates. But, 64 of 121 VCGs consisted of sole member. More than 65.8% of KR-VC104, was isolated from the three provinces, Kyongnam-, Kangwon-, and Chungbuk-do. In KR-VC104, 62.8%, 59.1%, and 85.9% of the isolates looked like virulent in colony type, pathogenicity test, and Bavendamm test. In ds-RNA detection tests using cellulose chromatography, 77 of total 650 isolates were ds-RNA positive and detected ds-RNA segments were approximately 12kb, 3kb, 2.7kb, 2kb, and 1.8kb in size. Among the 77 isolates, 46 isolates had 12kb and 25 isolates had 12kb and 2.7kb. Other 6 Isolates had small ds-RNA segments. Kyongnam-, Chonnam-, and Chungnam-do had 43, 16, and 5 ds-RNA positive isolates, respectively. Among the 121 VCGs, only 29 VCGs had ds-RNA positive isolates.(중략)

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.18 no.2
• /
• pp.101-108
• /
• 1982

In this paper the result of heat transfer analysis around the square heat source of interior solid by using the F. E. M is reported. Calculation for temperature distribution and each element was used by F. E. M. the solid is sub-divided into system of equal size triangular shape. These values of temperature distribution will valuable for design of jet engine and steam generator and the results gained are as follow; 1. Calculation by F. E. M is identified with the experiment. 2. Temperature distribution on the horizontal surface is $\theta$=0.698 in model 4 and the other hand $\theta$=0.401 in model 6 for X=16cm. In intermediates surface between heat source and bottom surface, the influence of L is more greater than that of height in the temperature difference. 3. Temperature distribution on the vertical surface for model 2 is resulted strong influence by K. In the case of Y=4cm is identified with $\theta$=0.0790 for K=7 and also $\theta$=0.0036 for K=0.3. In the difference of temperature distribution.

• Journal of the Korea Concrete Institute
• /
• v.14 no.5
• /
• pp.645-652
• /
• 2002

This paper presents the flexural behavior and strengthening effect of reinforced concrete beams bonded with carbon FRP plate. Parameters involved in this experimental study were plate bond length and sheet web anchorage length. Test beams were strengthened with FRP plate on the soffit and anchored with FRP sheet on the web. In general, strengthened beams with no web anchorage were failed by concrete cover failure along the longitudinal reinforcement. On the other hand, strengthened beams with web anchorage were finally failed by delamination shear failure within concrete after breaking of CFRP sheet wrapping around web. The ultimate load and deflection of strengthened beams increased with an increased bond length of FRP plate. Also, the ultimate load and deflection increased with an increased anchorage length of FRP sheet. Particularly, the strengthened beams with web anchorage maintained high ultimate load resisting capacity until very large deflection. The shape of strain distribution of CFRP plate along beam was very similar to that of bending moment diagram. Therefore, an assumption of constant shear stress in shear span could be possible in the analysis of delamination shear stress of concrete. In the case of full bond length, the ultimate resisting shear stress provided by concrete and FRP sheet Increased with an increase of web anchorage length. In the resisting shear force, a portion of the shear force was provided by FRP anchorage sheet.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.4
• /
• pp.49-57
• /
• 2009

The governmental investment to SOC facilities currently has increasedthe construction of new roads and the consistent extension of already-existing roads or the line-shape revision of those roads. As a result, the road cut slopes have been increasingrapidly. Unfortunately, human-life damages and property damages frequently occur due to the rockfall and the landslide every year. To reduce those damages, many studies have been performed. The present regulation regarding rockfall protection facilities follows the "Guide for Installation and Management of Road Safety Facilities" issued by MLTM (the Ministry of Land, Transport, and Maritime Affairs) that indicates the standard size of facilities and energy absorbing efficiencies. Most domestic road slopes use standardized rockfall protection facilities based on the regulation. However, there have been doubted about the effectiveness of rockfall protection facilities and the damages caused by rockfalls havebeen increasedevery year. Thus, it seems that relevant studies are necessary on the rockfall protection net being capable of supporting rockfall energies. Accordingly, this study reviews previous literature to investigate the function and the feature of rockfall protection nets and analyzetheir limitations by each type. After that, by using the pullout test device for a rockfall protection net, an experiment on the PVC coating net and the expanded metal is performed under the exact same condition. Finally, the features of the Expended metal is explained with the comparison analysises of load-variation and the confirmation of damaged forms. As a result, there have been founded the problemsof net breaking down and not being able to support due to PVC coating net's material property of disintegration. On the other hand, the Expanded Metal might be expected as a substituteof rockfall protection net according to its capability of support and integration.

• Journal of the HCI Society of Korea
• /
• v.8 no.2
• /
• pp.9-19
• /
• 2013

There has been much advancement in reality enhancement using audio-visual information. On the other hand, there is little research on provision of olfactory information because smell is difficult to implement and control. In order to obtain necessary basic data when intend to provide smell for video reality, in this research, we investigated user perception of smell in diverse videos and then classified the videos based on the collected user perception data. To do so, we chose five main questions which were 'whether smell is present in the video'(smell presence), 'whether one desire to experience the smell with the video'(preference for smell presence with the video), 'whether one likes the smell itself'(preference for the smell itself), 'desired smell intensity if it is presented with the video'(smell intensity), and 'the degree of smell concreteness'(smell concreteness). After sampling video clips of various genre which are likely to receive either high and low ratings in the questions, we had participants watch each video after which they provided ratings on 7-point scale for the above five questions. Using the rating data for each video clips, we constructed scatter plots by pairing the five questions and representing the rating scale of each paired questions as X-Y axes in 2 dimensional spaces. The video clusters and distributional shape in the scatter plots would provide important insight into characteristics of each video clusters and about how to present olfactory information for video reality.