• 제목/요약/키워드: Half-wavelength

검색결과 265건 처리시간 0.026초

광통신용 파장 대역해서 동작하는 체적 홀로그래픽 필터 (Volume holographic filter operating at $1.55{\mu}m$ region)

  • 정성용;양병춘;이병호
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
    • /
    • pp.987-989
    • /
    • 1998
  • We demonstrate and characterize a volume holographic filter operating at $1.55{\mu}m$ region, which corresponds to the wavelength region of optical communication system. By changing recording times or the angle between writing beams. the reflectivity, the filtered wavelength, and the bandwidth of this filter can be controlled. A center wavelength of 1532.8 nm, reflectivity of 10.7% and a bandwidth with full width at half-maximum of 4.0nm are measured in our experiment.

  • PDF

고정된 분포 분사/흡입을 통한 채널 유동의 저항 감소 (Drag reduction in channel flow using stationary distributed blowing and suction)

  • 김주현;최해천
    • 유체기계공업학회:학술대회논문집
    • /
    • 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
    • /
    • pp.195-198
    • /
    • 2006
  • The possibility of skin friction reduction in laminar channel flow is investigated when the flow is subjected to stationary distributed surface blowing and suction. Blowing and suction provided at the channel walls is steady in time but varies as a sine function along the streamwise direction. The skin friction changes depending on the wavelength and amplitude of the actuation. Especially, the skin friction is reduced below that of fully developed laminar flow as the wavelength decreases and amplitude increases. The optimal wavelength of producing minimum skin friction is $\pi/2{\delta}$, where $\delta$ is the channel half-height It is observed that the distributed blowing and suction induces strong negative Reynolds shear stress in the near-wall region at the end of the suction part.

  • PDF

광결합 변화에 의해 부모드 억제된 협대역 수직 결합기 파장 여과기 (Coupling variation induced side-lobe suppressed narrowband vertical coupler wavelength filter)

  • 한상국
    • 한국광학회지
    • /
    • 제8권6호
    • /
    • pp.506-509
    • /
    • 1997
  • 수직결합 구조의 방향성결합기 파장여과기에 진행방향으로 광결합력의 변화를 도입으로서 부엽이 감소하고 동시에 통과대역폭이 감소하는 새로운 구조의 파장여과기를 제안하였다. 광결합 구조로서는 결합정도가 반정현 모양인 분포결합과 최소의 결합을 일정하게 유지하는 느린결합을 연계하여 사용하였다. 모의실험 결과 중심파장 1.5507$\mu\textrm{m}$에서 3 dB 통과대역폭은 약 1.5 nm이고 부엽 억제비는 20 dB이상으로서 기존의 일정한 결합구조의 파장여과기에 비해 2배 이상 증가함을 알 수 있었다. 파장역다중을 위해 두 개의 파장여과기를 단일집적한 2채널 역다중기를 제안하고 동작특성을 모의실험하였다.

  • PDF

중계 구간의 개수가 다르고 RDPS가 비대칭인 분산 제어 링크 (Dispersion-Managed Link with Different Numbers of Fiber Spans and Asymmetric Distribution of RDPS)

  • 홍성화;이성렬
    • 한국항행학회논문지
    • /
    • 제23권6호
    • /
    • pp.570-576
    • /
    • 2019
  • 광 네트워크의 융통적 구성을 위해 전체 전송로 중간이 아닌 위치에 존재하는 광 위상 공액기를 갖는 분산 제어 링크를 제안하였다. 제안하는 분산 제어 링크에서 광 위상 공액기는 6개 중계 구간으로 구성되는 전반 전송 구획과 14개로 구성되는 후반 전송 구획 사이에 존재하고, 각 전송 반 구획에서의 평균 중계 구간 당 잉여 분산 (RDPS; residual dispersion per span)이 서로 다른 비대칭 구조이다. 또한 파장 분할 다중 채널의 왜곡 보상을 위하여 각 중계 구간마다 실제 RDPS를 점진적으로 증가/감소시키는 인위적 분포 구조를 채택하였다. 시뮬레이션 결과 제안된 16개의 비대칭 분포 제어 링크 구조 중 인접한 중계 구간 간 RDPS 편차를 적게 하여 전반 전송 구획에서는 중계 구간의 실제 RDPS를 점진적으로 감소시키고 후반 전송 구획에서는 중계 구간의 실제 RDPS를 점진적으로 증가시키는 구조가 왜곡된 파장 분할 다중 채널의 보상에 적합한 것을 확인하였다.

Non-midway 광 위상 공액기를 갖는 분산 제어 전송 링크를 통한 WDM 채널의 왜곡 보상 (Compensation for the Distorted WDM Channels through the Dispersion-managed Optical Links with Non-midway Optical Phase Conjugator)

  • 이성렬
    • 한국항행학회논문지
    • /
    • 제19권6호
    • /
    • pp.595-600
    • /
    • 2015
  • 전통적인 midway 광 위상 공액기 (OPC; optical phase conjugator)가 아닌 non-midway OPC를 분산 제어 (DM; dispersion-managed) 광전송 링크에 적용하여 파장 분할 다중 전송 (WDM; wavelength division multiplexed)을 위한 융통적인 네트워크의 구성 가능성을 분석하였다. 중계 구간의 수가 많을수록, 또한 중계 구간 당 잉여 분산 (RDPS; residual dispersion per span)이 클수록 non-midway OPC를 통한 유연한 링크의 구성 가능성이 커지는 것을 확인하였다. 아울러 OPC 이후의 후반 전송 구획을 구성하는 각 중계 구간의 RDPS를 OPC 이전의 전반 구획의 RDPS의 평균값으로 설정하는 링크 구조가 융통적 링크 구성에 더욱 유리하다는 것을 확인하였다.

자기상보 원리를 이용한 UAV 탑재용 초광대역 반파장 루프 안테나 (A Ultra-wide Band Half-wavelength Loop Antenna using Self-complementary Principle for UAV Applications)

  • 윤명한;김준원;우종명
    • 한국인터넷방송통신학회논문지
    • /
    • 제15권2호
    • /
    • pp.213-219
    • /
    • 2015
  • 본 논문에서는 무인 항공기에 장착 가능한 초광대역 반파장 루프 안테나를 설계하였다. 설계된 안테나는 야구공 모양에 자기상보 원리(self-complementary principle)를 적용하여 광대역 특성을 얻었다. 또한 저자세로 변형하기 위해 방사체 사이에 접지면을 두어 image theory를 적용하였다. 이렇게 설계된 초광대역 반파장 루프 안테나의 크기는 $0.20{\lambda}_L{\times}0.14{\lambda}_L{\times}0.16{\lambda}_L$ (${\lambda}_L$은 최저주파수의 공기 중 한 파장)이며, -10 dB 대역폭은 50 : 1(0.3 GHz ~15 GHz) 이상으로 측정되었다. 방사패턴은 모든 주파수에서 모노폴 안테나와 유사한 패턴을 가진다. 또한 설계된 안테나를 축소된 UAV(Unmannded Aerial Vehicle)의 동체 배면에 장착하여 그 특성 확인결과 초광대역 특성을 유지하면서, 모든 주파수 대역에서 모노폴 안테나와 유사한 방사패턴을 나타내었다.

단일 모드 광섬유의 복굴절이 편광상이 배치구조 기반 고차 광섬유 빗살 필터의 출력 스펙트럼에 미치는 영향에 대한 고찰 (Study on Birefringence Effect Of Single-Mode Fiber on Output Spectra of High-Order Fiber Comb Filter Based on Polarization-Diversity Loop Configuration)

  • 김영호;이용욱
    • 조명전기설비학회논문지
    • /
    • 제26권6호
    • /
    • pp.8-15
    • /
    • 2012
  • In this paper, we investigated possible optical parameters causing deviation of experimentally observed output spectra from theoretically predicted results in a high-order fiber comb filter based on a polarization-diversity loop configuration. They include wavelength dependency of half-wave plates (HWPs) inserted in the filter for wavelength switching and the modal birefringence of single-mode fibers (SMFs) with which optical components comprising the filter are connected. In order to consider the effect of the modal birefringence of the SMF on a filter performance, it is modeled as a low birefringence fiber with an arbitrary orientation angle and birefringence. It is found from the simulation results that the modal birefringence of SMFs strongly affects the spectral characteristics of the filter and decreases the extinction ratio of the filter, compared with the wavelength dependency of HWPs. In particular, it is also confirmed that the spectral deviation and asymmetric distortions of side-lobes in narrow band transmission spectra result mainly from the modal birefringence of SMFs.

고단차 불연속 형상의 3차원 측정을 위한 이중파장 위상천이 영사식 무아레 (Two-Wavelength Phase-Shifting Projection $Moir\acute{e}$ Topography for Measurement of Three-Dimensional Profiles with High Step Discontinuities)

  • 김승우;오정택;정문식;최이배
    • 대한기계학회논문집A
    • /
    • 제23권7호
    • /
    • pp.1129-1138
    • /
    • 1999
  • [$Moir\acute{e}$] technique is now being extensively investigated as a fast non-contact means of three-dimensional profile measurement especially for reverse engineering. One problem with $moir\acute{e}$ technique is so called $2\pi$-ambiguity problem that limits the maximum step height difference between two neighboring sampling points to be less than half the equivalent wavelength of $moir\acute{e}$ fringes. In this investigation, a new two-wavelength scheme of projection $moir\acute{e}$ topography is proposed and tested to cope with the $2\pi$-ambiguity problem. Experimental results are discussed to assess the new method in measuring large objects with high step discontinuities.