• 제목/요약/키워드: Half Cutting

검색결과 83건 처리시간 0.026초

생열귀나무 삽목시 발근과 뿌리생장에 미치는 삽수종류, 생장조절물질 및 상토의 효과 (Effect of cutting type, growth regulators and propagation media on rooting and root growth of on Rosa davurica $P_{ALL}$)

  • 이화영;임정대;김일섭;정일민;유창연
    • 한국자원식물학회지
    • /
    • 제13권2호
    • /
    • pp.140-146
    • /
    • 2000
  • 생열귀나무의 번식에 관한 연구로 숙지, 녹지, 반녹지삽 및 근삽등의 삽목번식체계를 확립하기 위하여 실시된 실험 결과는 다음과 같다. 1. 생열귀나무의 숙지, 녹지, 반녹지삽으로 삽목실험을 한 결과 숙지삽에 대한 결과는 각각의 생장 조절물질 및 상토조건에서 발근이 전혀되지 않았으며 반녹지삽, 녹지삽, 근삽의 순으로 양호한 발근율을 나타내어 생열귀 삽목시 숙지삽이나 반녹지삽을 이용하는 것보다 녹지삽을 채취하거나 근삽을 이용하여 삽목하는 것이 양호하였다. 2.녹지삽의 경우 무처리 식물체가 전혀 발근이 되지 않은 반면 rooton-F를 처리하는 것이 가장 양호한 발근율을 나타내었으며 NAA 처리시는 저농도에서 발근율 및 캘러스형성율이 증가하였고 IAA를 처리한 경우는 고농도일수록 발근율 및 캘러스형성율이 양호하였다. IBA는 IAA, NAA보다는 저조한 결과를 나타냈었다. 3. 녹지삽에서는 vermiculite와 perlite의 혼합토양에 삽목하는 것이 가장 양호한 발근율을 나타내었으며 그 다음으로 점토, 사토 순으로 나타났다. 녹지삽에 rooton-F를 처리하였을 때 근장에 있어서는 사토가 더 우수한 반면 근수는 점토에서 더 우수하여 점토와 사토에서 근수와 근장이 서로 상반된 차이를 보였다. 4. 반녹지삽에 rooton-F를 분의처리한 경우 녹지삽에서 결과가 좋았던 vermiculite+perlite에서는 10%정도만 유기되고 점토에서 양호한 발근효과를 나타내었다.

  • PDF

2차원 자유형상의 레이저 절단을 위한 CNC 공구경로 생성 (CNC Torch Path Generation for Laser Cutting of Planar Shapes)

  • 박형준;안동규
    • 한국CDE학회논문집
    • /
    • 제12권3호
    • /
    • pp.153-162
    • /
    • 2007
  • In this paper, we propose a knowledge-based method for generating CNC torch path for laser cutting of the outlines of planar shapes. The proposed method consists of two main phases: laser cutting knowledge construction and CNC torch path generation using the knowledge. In the first phase, cutting experiments are conducted on various operating parameters, and then empirical data are stored and analyzed to make up the knowledge of laser cutting. With this knowledge, we can inquire what a kerf width is for specific operating parameters. In the second phase, using the knowledge of laser cutting, CNC torch path is generated for cutting the outlines of the given planar shapes. This phase is basically based on the offset generation of each outline by a sequence of arc splines, where the offset distance is the same as the half of the kerf width determined from the constructed knowledge. The proposed method based on laser cutting knowledge makes full use of arc interpolators in CNC torch path generation. The method can efficiently reduce the number of path segments while keeping the torch path within the desired accuracy.

절삭유 레벨에 따른 선삭가공 절삭특성 (Cutting Characteristics Depending on Coolant Level in Turning Process)

  • 양승한;이영문
    • 한국정밀공학회지
    • /
    • 제21권1호
    • /
    • pp.80-86
    • /
    • 2004
  • With the increasing demand of environmentally clean machining in recent years, the use of coolants has been restricted extensively. In this paper, a multiple comparison method(Tukey's HSD method) is proposed to choose the optimum level of coolant necessary for an efficient and environmentally clean machining. The cutting temperature, specific cutting energy, and surface roughness in turning process are analysed by ANOVA(Analysis Of Variance) and Tukey's HSD method. From the experimental results and statistical analysis, it is found that the optimum condition of coolant level is 10 ml/min with 6% mix ratio, which is almost half of the commonly used level.

자탈형 콤바인의 예취작업법에 관한 연구 -혼합예취법을 중심으로 (제1보)- (Stuides on the Cutting Methods of the Self-feeding Type Combine -on the Mixed Cutting Method (1)-on the Mixed Cutting Method(I))

  • 최복연
    • 한국농공학회지
    • /
    • 제18권2호
    • /
    • pp.4096-4104
    • /
    • 1976
  • This experiment was carried out to investigate the efficient turning method which will be able to use every cutting methods, to calculate the width of the center field which must transpose from rotary cutting method to return cutting method, to investigate the effects of L/W and unit field on the operation efficiency. The results are summarized as follows: 1. In case of cutting in the outer field, the efficient turning method is the "$\alpha$" type turning method (half U-shaped turning method) at the first rotation, is the "$\beta$" type turning method (T-shaped turning method) at the second to fourth rotation. 2. In case of cutting in the inner field, the efficient turning method which takes the least turning time is the "a" type turning method ($\Delta$-shaped turning method). 3. The width of the center field (W') changes by the length-width ratio (L/W) and width (W), W' is 9.0m in case that L/W is 2.5 and W is 30m. 4. The larger L/W and area of unit field (A) become, the more operation efficiency (E) increases, and the limits that E is affected signicantly by L/W is 2 to 3.5 and A is within 5,000$m^2$. within 5,000$m^2$.

  • PDF

비절삭저항 상수 변화에 따른 절삭력 분석 (An analysis of cutting force according to specific force coefficients)

  • 김종도;윤문철
    • 한국기계가공학회지
    • /
    • 제13권2호
    • /
    • pp.108-116
    • /
    • 2014
  • Considering the run-out effect and cutting force coefficients, the cutting force profile of half immersion end-milling was analyzed in detail. The effects of three specific cutting-force coefficients and three edge-force coefficients are verified. Through a detailed investigation, it is proved that the radial cutting force coefficients and are the major factors which increase the cutting forces Fx and Fy in end-milling. However, the axial cutting force coefficients have no influence on the force Fx and Fy changes in end-milling. Also, the analyzed end-milling force model shows good consistency with the actual measured force with regard to Fx and Fy. Thus, this model can be used for the prediction of the force history in end-milling with run-out, and it incurs a different force history with different start and exit immersion angles as well as holding effects.

Performance Test of Fully Automatic Potato Seeding Machine by In-situ Process of Cutting Seeds

  • Cho, Yongjin;Choi, Il Soo;Kim, Jae Dong;Oh, Jong-woo;Lee, Dong-Hoon
    • Journal of Biosystems Engineering
    • /
    • 제42권3호
    • /
    • pp.147-154
    • /
    • 2017
  • Purpose: To reduce the costs of potato seeds and labor of workers, a fully automatic in-situ seeding machine for cutting seed potatoes was developed. Methods: An experiment was conducted to evaluate the seeder performance of the prototype of potato planter by cutting seeds in farmlands from March to April 2017. The study tested the seeder performance at working speeds ranging from 0.28 to 0.45 m/s. The seeding rate and seeding distance were also investigated according to the planned distance between planted seeds from 20 to 30 cm, with 5 cm intervals. Results: Tests on the performance of the developed cutting blade on the automatic potato seeder show that whole potatoes should be used instead of half potatoes. The seeding rates were 88.8% and 82.5% for whole and half potatoes, respectively. When the tractor working speed was increased from 0.28 to 0.45 m/s, the successful seeding rate decreased from 98.8% to 96.3%, respectively. However, with planted seed distances of 20, 25, and 30 cm, the successful seeding rates were near 98%. Conclusions: The developed automatic potato seeder can to improve the labor productivity and cultivation environment of potato farms by the mechanization of the seeding process, which is currently associated with high-labor, -costs, and -hours. Therefore, based on this study, the developed automatic potato seeder provides the mechanization necessary for improved potato cultivation conditions in farmlands.

Experimental Investigation of Concave and Convex Micro-Textures for Improving Anti-Adhesion Property of Cutting Tool in Dry Finish Cutting

  • Kang, Zhengyang;Fu, Yonghong;Chen, Yun;Ji, Jinghu;Fu, Hao;Wang, Shulin;Li, Rui
    • International Journal of Precision Engineering and Manufacturing-Green Technology
    • /
    • 제5권5호
    • /
    • pp.583-591
    • /
    • 2018
  • Tool-chip adhesion impacts on cutting performance significantly, especially in finish cutting process. To promote cutting tools' anti-adhesion property, the concave micro-grooves texture (MGT) and convex volcano-like texture (VLT) were fabricated separately on lathe tools' rake faces by laser surface texturing (LST). Various orientations of MGT and different area densities (9% and 48%) and regions (partial and full) of VLT were considered in textured patterns designing. The following orthogonal cutting experiments, machining of aluminum alloy 5038, analyzed tools' performances including cutting force, cutting stability, chip shape, rake face adhesion and abrasion. It indicated that under dry finish cutting conditions, MGT contributed to cutting stability and low cutting forces, meanwhile friction and normal force reduced by around 15% and 10%, respectively with a weak correlation to the grooves' orientation. High density VLT tools, on the other hand, presented an obvious anti-adhesion property. A $5{\mu}m$ reduction of crater wear's depth can be observed on textured rake faces after long length cutting and textured rake faces presented half size of BUE regions comparing to the flat tool, however, once the texture morphologies were filled or worn, the anti-adhesion effect could be invalid. The bearing ratio curve was employed to analysis tool-chip contact and durability of textured surfaces contributing to a better understanding of anti-adhesion and enhanced durability of the textured tools.

합성 기질에 의해 형성된 Lambda Site-specific Recombination 중간 대사물의 분석 (Analysis of Lambda Site-specific Recombination Inermediates Generated by Synthetic Substrates)

  • 이나영;유승구
    • 한국미생물·생명공학회지
    • /
    • 제23권3호
    • /
    • pp.282-287
    • /
    • 1995
  • Integrase (Int) carries out the cutting and resealing of attachment (att) site DNA via a covalent Int-DNA intermediate. A family of synthetic substrate DNAs was designed to accumulate Int-DNA intermediate. Int-DNA intermediates accumulated by half substrate was analyzed by SDS- KCI precipitation and restriction digestion. The results showed that Int-half DNA intermediate was circular and contained covalently bound Int molecule. Int-DNA intermediates were also trapped with three other kinds of synthetic substrates.

  • PDF

≪상한론≫ 탕제(湯劑)에서 반하(半夏)의 일일 복용량 수정 (Revisoin of the Daily Dose of Pinelliae Tuber in Treatise on Cold Damage Diseases)

  • 김인락
    • 대한본초학회지
    • /
    • 제35권1호
    • /
    • pp.19-25
    • /
    • 2020
  • Objects : The daily dose of Pinelliae Tuber in ≪Treatise on Cold Damage Diseases≫ is half seung in volume, two and half ryang in weight, and fifteen in total number. But the daily dose should be a whole number. So I found out the background of this setting and correct solution. Methods : I searched Classics of Traditional Medicine, found out the background of the daily dose setting, solution. Results : The daily dose of Pinelliae tuber in ≪Hangdi's Internal Classic Miraculous Pivot≫, ≪Bohenggyuljangbuyongyakbeobyo≫ is half seung. ≪Treatise on Cold Dameage Diseases≫ followed the same daily dose of that because it referred to these books. In ≪Synopsis of Prescription of the Golden Chamber≫, the daily dose of that is half seung, one or two seung. The half seung of the Pinelliae Tuber is thirty three mL, but the diameter is 1~1.5 cm that accurate measurement by volume is difficult. The daily dose by weight is correct considering the unity of marking of the daily dose, accuracy of measurement, the fact that Pinelliae Tuber is currently distributed by cutting. So, two ryang is correct which is thirteen gram. Conclusions : Considering the traditionality, the convenience of measurement, the daily dose of Pinelliae Tuber in the ≪Treatise on Cold Damage Diseases≫ is half seung, but considering the unity, accuracy, current state of distribution, it is correct that the daily dose of it is two ryang. It corresponds to thirteen gram.

금속판재의 하프피어싱 공정에서의 틈새 영향 연구 (Influence of Clearance in Half-piecing of Sheet Metal)

  • 연시모;이슬기;정완진;김종호
    • 소성∙가공
    • /
    • 제22권8호
    • /
    • pp.437-441
    • /
    • 2013
  • Recently, the engraving of letters or a pattern on a product surface has received more attention especially in trying to satisfy the customer requirements. Half-piecing is a protrusion forming process that pierces only 40~50% of the material thickness. In the current study, the half-piercing technique for making clear letters by protruding sheet material was selected and studied. The influence of clearance and penetration depth was investigated by measuring the camber and extruded length of a protrusion after experiments. In addition, a numerical analysis was performed for the same working conditions and compared with experimental results. It is shown that, as the clearance increases, the camber of a protrusion increases rapidly and the extruded length decreases slightly. The deformation pattern around the cutting edge during half-piercing changes from an extrusion mode to a shearing mode as the clearance changes from minus to plus values. It is also confirmed that the experimental results show a good agreement with the numerical analyses.