• KIEAE Journal
• /
• 제9권4호
• /
• pp.11-16
• /
• 2009

To act and respond to the climate changes and to bring about power-saving in buildings, the changes in the atmospheric data in Korea are recorded and assessed. For the two regions representative of Korea, the data obtained from HadCM3 and actual data are compared and analyzed so as to concretely evaluate and confirm the changes taking place in the cooling and heating degree days in Korea. For the past 40 years, from 1996 to 2005, the number of heating degree days was on the decline and in the two representative regions, between 1980's and 1990's, the number of decrease in the heating degree days had been quite large. The number of cooling degree days showed a trend of increase since the 1970's and just as in the case of heating degree days, the extent of increase was quite large between the 1980's and the 1990's. The results of comparison of the number of heating and cooling degree days, one obtained from the "Korea Meteorological Administration" and another from the HadCM3 data (E127.5,N37.5,E127.5,N35), which is one of the ways of predicting the climate, showed similar trends in the number of heating degree days in the Yeosu area. However, in the case of the number of heating degree days in Seoul and the number of cooling degree days both in Seoul and Yeosu, the differences in the number ranged from a minimum of 300 days to a maximum of 1500 days. This could be attributed to the grid points used in the HadCM3, the differences in the values of latitudes and longitudes of these two locations considered in this study, topographical differences, heat island effect caused by population density etc. and while using the HadCM3, these variables factors must be taken into consideration.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2011년도 정기 학술발표대회
• /
• pp.175-175
• /
• 2011

IDF 곡선은 수리구조물의 설계에 이용되며 본 연구에서는 기후변화를 고려한 GCM의 시간적 공간적 축소화기법을 통하여 미래의 IDF 곡선을 생성하였다. GCM자료로는 HadCM3과 CGCM3의 지역주의와 경제발전을 지향하는 A2시나리오를 이용하였다. GCM자료에 대한 공간적인 축소화기법으로 다중회귀 모형인 SDSM(Statistical DownScaling Model)을 이용하여 2030년, 2050년, 2080년의 미래의 일강우 자료를 생성하였다. 이를 다시 시간적 축소화기법인 GEV분포를 이용한 Scaling-Invariance기법을 적용하여 시단위의 강우자료를 생성하였다. 이를 통해 최종적으로 HadCM3과 CGCM3에 대한 각각 미래의 IDF곡선을 생성하였다. CGCM3의 경우 지속적인 강우강도의 증가를 보였지만 HadCM3의 경우 2050년대 감소하다 2080년대 다시 증가하는 양상을 보였다. 또한 CGCM3의 경우 HadCM3의 경우보다 좀 더 높은 강우 강도를 보였다. 본 연구의 대상지역은 서울지역이며 생성된 자료의 신뢰성을 확보하기위하여 서울기상관측소의 1961년부터~2000년까지의 일단위 강우자료를 이용하여 검 보정을 수행하였다.

• 한국의상디자인학회지
• /
• 제10권3호
• /
• pp.163-171
• /
• 2008

This article aims to evaluate the visual effects and images according to the changes in the width of pleats of accordion pleats skirt. I altered the width of the pleats to seven categories in changes of 0.5cm, 0.7cm, l.0cm, 1.3cm, 2.0cm, 2.5cm and 3.0cm. For the visual evaluation, seven stimuli had been placed in mannequins, and had been estimated by experts in fashion design. For the visual evaluation according to changes in the width of pleats of according pleats skirt. I used 11 pairs of items to find their visual effects, and 17 pairs of adjectives to measure the visual images. Those stimuli and adjectives had been randomly given to evaluators and had been evaluated by the seven-point Likert type scale. The data have been analyzed by frequency, factor analysis, ANOVA, Scheffes test and correlation analysis. According to factor analysis of the visual effects of the accordion pleats skirt, the result was classified into three factors: the verticality of the lower body, flexuosity of the lower body, and shape of the abdomen. According to factor analysis of the visual image of the accordion pleats skirt, the result was classified into the following three factors: activity, attraction and neatness. In visual effects, the verticality of the lower body had been assessed as the most important factor of all. The visual effect was positive when the width of pleats had been narrowed. In visual image, activity had been assessed as the most important factor. In the case of accordion pleats skirt, as the width of pleats became wider, it had a stronger image in being active and casual.

• 원예과학기술지
• /
• 제18권5호
• /
• pp.612-620
• /
• 2000

본 연구는 토양습윤제를 개발하기 위해 비이온계 계면활성제인 polyoxyethylene octylphenyl ether[$C_8H_{17}O(C_2H_4O)_{10}H$, POE]를 주 계면활성제로, polyoxyethylene+polypropyleneoxide tridecylether(1:1, w/w, CM-1), polyoxyethylene+polypropyleneoxide tridecylether+propyleneglycol monomethylether(1:1:2, w/w/w, CM-2) 및 glycerin+ditridecyl phthalate(1:1, w/w, CM-3)등 3종류의 부 계면활성제, 그리고 질석과 비석을 증량제로 조합하여 상토 내 농도변화, 초기습윤화에 미치는 영향 및 상토의 물리적 특성에 미치는 영향 등을 조사하였다. 비석이나 질석이 증량제로 이용되고 POE와 CM-1, 2 또는 3을 조합한 경우 초기용출량이 많았으며 6회 이후 급격히 감소하여 불안정한 용출곡선을 보였다. POE+CM-1, 2 또는 3이 상토의 초기습윤화에 미치는 영향에서 AquaGro가 혼합된 처리가 다른 모든 처리보다 초기 18시간 동안의 수분 보유량이 많았으나 처리간 차이가 뚜렷하지 않았으며, 84시간 이후에는 POE+CM-2 처리에서 가장 많은 수분을 보유하였고 무처리구를 제외한 모든 토양습윤제 혼합처리구간의 차이는 뚜렷하지 않았다. 증발에 의한 상토의 수분상실에서 비석이 증량제로 이용된 경우 POE+CM-3이 혼합된 상토의 증발속도가 가장 빨랐고 POE+CM-2, AquaGro, 무처리구, 그리고 POE+CM-1의 순으로 느려지는 경향이었다. 그러나 질석이 증량제로 이용된 경우 POE+CM-1의 증발속도가 다른 처리들 보다 월등히 빨라 수분상실량이 많았으며, POE+CM-3, AquaGro, 무처리구 그리고 POE+CM-2의 순으로 느려지는 경향이었다. 단위시간당 상토안으로 침투되는 수분량에서 비석이 증량제로 이용된 경우 POE+CM-1, POE+CM-3, AquaGro, POE+CM-2 및 무처리구의 순으로 단위시간당 침투되는 수분량이 적어지는 경향이었다. 질석이 증량제로 이용된 경우 POE+CM-3, AquaGro, POE+CM-1, POE+CM-2 및 무처리구의 순으로 단위시간당 침투되는 수분량이 적어지는 경향이었다.

• 한국환경보건학회지
• /
• 제38권6호
• /
• pp.568-574
• /
• 2012

Objectives: The purpose of this experiment is to understand the phosphorus removal ratio effects of iron plates per unit of surface area through the iron electrolysis system, which consists of an anoxic basin, aerobic basin, and iron precipitation apparatus. Methods: Iron electrolysis, which uses an iron precipitation reactor in anoxic and oxic basins, consisted of iron plates with total areas of 400 $cm^2$, 300 $cm^2$ and 200 $cm^2$ respectively. The FNR process was operated with a hydraulic retention time and a sludge retention time of 12 hours and three days, respectively. Wastewater used in the experiments was prepared by dissolving $KH_2PO_4$ in influent water. Results: The iron plates 400 $cm^2$ (16.6 $mA/cm^2$), 300 $cm^2$ (13.3 $mA/cm^2$) and 200 $cm^2$ (7.3 $mA/cm^2$) in surface area in the phosphorus reactor had respective phosphorus of 2.4 mg/l, 2.7 mg/l and 3.2 mg/l in the effluent and phosphorus removal respective efficiencies of 90.3%, 89.1% and 87.1%. The effluent in the reactor, where the iron plate was not used, had relatively very low phosphorus removal efficiency showing phosphorus concentration of 15.3 mg/l and a phosphorus removal efficiency about 38.3%. Phosphorus removal per ferrous was 0.472 mgP/mgFe in the iron electrolysis system where the surface area of iron was low. Phosphorus pollution load per active surface area and the phosphorus removal efficiency had an interrelation of RE = -0.27LS + 89.0 (r = 0.85). Conclusion: With larger iron plate surface area, the elution of iron concentration and phosphorus removal efficiency was higher. The removal efficiency of phosphorus has decreased by increasing the initial phosphate concentration in the iron electrodes. This shows a tendency of decreasing phosphorus removal efficiency because of decreasing of iron deposition as the phosphorus pollution load per active surface area increases.

• 패션비즈니스
• /
• 제12권1호
• /
• pp.93-108
• /
• 2008

This study held physical measurement for male subjects in their 20s living in Ningbo City, Zhejiang Province in China, showing the biggest market in men's clothes. Their representative lower body types with average shapes and sizes were chosen so as to develop men's slacks patterns with better dimension fitness. The following are the results of the analysis: 1. Slacks patterns were made based on the mean measurement values of 5 people, who were closest to the representative body types, from the index*absolute group of 47 people. The dimensions of application for slacks pattern-making were 77cm(omphalion waist circumference), 91cm(hip circumference), and 103cm(slacks length). 2. For the comparison of high-fitness and more-room pattern dimensions, 5 styles of slacks were made: Korean, Chinese, British, Japanese, and industrial. In the dressing fitness tests, industrial patterns had excellent appearance and Japanese ones had the best function. 3. Based on the analysis results of slacks pattern comparison, the target slacks were experimentally made and received superior evaluation points to the compared slacks patterns in two times of evaluation for appearance and function. 4. The final slacks pattern in this research had the following dimensions: front waist circumference: W(1-2cm with room included)/4-1cm, back waist circumference: W/4+1cm, front hip circumference: H(9$\sim$10cm with room included)/4-1cm, back hip circumference: H/4+1cm, crotch length: H/4-1.5cm, hip length: crotch length-H/12, front crotch extension: H/16-1.5cm, back crotch extension: H/8+3cm, knee line: 33cm below crotch line, front tuck amount: 4cm, back dart amount: 2.5cm(center) and 1.5cm(side), and back dart length: 10cm (center) and 6cm(side).

• 복식문화연구
• /
• 제1권2호
• /
• pp.159-179
• /
• 1993

The purpose of this study is to collect data for he improvement of the accuracy of upper garments construction of the old whose bodies have been changed due to their age. In this study the body measurements with 61 items were taken from 226 men(aged fro m 60 to 80) living in Seoul by the R. Martin's method in 1992. The data were calculate by computer and analyzed by the multivariate method, especially factor and cluster analysis. The results of the study were as follows; 1. The average stature of elderly males was 163.6cm, chest circumference 91.6cm, waist circumference 9\\85.5cm. hip circumference 92.8cm, neck circumference 37cm, arm length 55.4 cm, back length 42.6cm, shoulder breadth 42.9cm and the Roher's Index 1.39, which was a standard body shape. 2. The items of factor analysis were explained to seven, namely, the degree of fatness of the upper body, the size of the frame of body, the length of the upper body, the degree of curve of the front body, the size of shoulder, the shape of the back, and the slope of shoulder. 3. The body types of subjects were classified into four types. The majority was type 4, which was 67% of subjects and considered as balanced body type. The distinctive features of those types are as follows; Type 1. The subjects of this type had a slight skeletal structure and were the thinnest of all the subjects with thin and forward-bent arm. Type 2. The subjects of this type were the tallest of all the subjects. they had the straightest side of body and a well-developed upper arm. The thigh length of this type was longer than the length of trunk. Type. 3. The subjects of this type was only one, so ti could be excluded. Type 4. The subjects of this type had a long trunk, well-developed shoulder, and a crook in their neck and back. The arm length and thigh of this type were short and those circumferences were thick. Type 5. The subjects of this type were the shortest of all, but had the highest degree of fatness in the waist and abdominal. They had well-developed front muscles of body and projected hip.

• Journal of Chest Surgery
• /
• 제11권2호
• /
• pp.147-152
• /
• 1978

Six patients with pulmonary tuberculosis with cavity had cavernoplasty at Seoul National University Hospital during the last 4 years and 9 months, from October 1973 to April 1978, were studied in order to assess the clinical values of cavernoplasty. 2] All the cases were male, and the mean age was 31.5 years. 2] All the patients had combined therapy with more than two antituberculosis drugs preoperatively, its minimum duration being 8 months and maximum duration 5 years. 2] Nonspecific symptoms were predominant just prior to admission, weight loss being in 50% and loss of appetite in 50% of cases, respectively. The preoperative cavity size on plain film was minimum 2.5cm by 3.5cm and maximum 6.0cm by 4.0cm with the mean of 4. 4cm by 3.4cm. The cavity size was reduced postoperatively to 1/3-1/4 of preoperative size with the mean of 1.15cm by 1.59cm. 2] Sputum smear for acid fast bacilli was converted to negative postoperatively in two cases. 2] Complications occurred in two cases. One was postoperative pleural effusion and the other was recurrence of symptoms 2 years after surgery. 2] Of the 3 cases able to follow, 2 stopped antituberculous medication after one year. The third case was still on medication because of bronchiectasis due to tuberculous infection.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 춘계학술대회 논문집
• /
• pp.188-193
• /
• 1997

ZnO thin film had been deposited on the glass 7r sputtering method, and investigated by electrical and structural properties. When the rf power was 188W and sputtering pressure was 1$\times$10$^{-3}$ Torr at room temperature, Al-doped ZnO thin film had the lowest resistivity(1$\times$10$^{-4}$ $\Omega$.cm), and then carrier concentration and Hall mobility were 6.27$\times$10$^{20}$ cm$^{-3}$ and 22.04$\textrm{cm}^2$/V.s, respectively. And undoped ZnO thin film had about 10$^{14}$ $\Omega$.cm resistivity when oxygen content was 10% or more at room temperature. The surface morphology of ZnO thin film observed by SEM was overall uniform when oxygen content was 50% below and sputtering pressure was 1.0$\times$10$^{-1}$ Torr.

• 한국산림과학회지
• /
• 제31권1호
• /
• pp.43-47
• /
• 1976

본시험(本試驗)은 저사저수구(貯砂貯水溝)의 유토저지효과(流土沮止効果)를 구명(究明)키 위하여 실시(實施)되었다. 10개(個)의 저사저수구(貯砂貯水溝)가 $50m^2$크기의 시험구내(試驗區內)에 등고선(等高線) 방향(方向)으로 설치(設置)되었다. 저사저수구(貯砂貯水溝)의 크기는 2종류(種類)로서 하나는 폭(幅)$30cm{\times}$장(長)$100cm{\times}$심(深)30cm이고 다른 것은 폭(幅$30cm{\times}$장(長)$100cm{\times}$심(深)20cm였다. 1. 저사저수구(貯砂貯水溝)는 유토저지효과(流土沮止効果)가 매우 높아서 대조구(對照區)는 저사저수구설치구(貯砂貯水溝設置區)보다 2.3~2.6배(倍)의 높은 유토량(流土量)을 나타내었다. 2. 30cm깊이 저사저수구(貯砂貯水溝)와 20cm깊이 저사저수구간(貯砂貯水溝間)에는 차이(差異)가 없었다. 3. 저사저수구(貯砂貯水溝)는 식생(植生)의 피복도(被覆度), 생립본수(生立本數) 및 생장(生長)에는 아무런 영향(影響)을 주지 못했다. 4. 경사여지(傾斜餘地)가 중경사지(中傾斜地)와 완경사지(緩傾斜地)에 비(比)해 식생(植生)의 피복도(被覆度), 생장(生長) 및 생장량(生長量)에 있어서 저조(低調)한 결과(結果)를 보여 주었다.