• 한국미생물·생명공학회지
• /
• 제26권6호
• /
• pp.537-544
• /
• 1998

3-HV 몰분율이 증대된 P(3HB-3HV)의 고농도 생산을 위하여 재조합 phbC유전자를 모균주에 재도입시킨 형질전환 Alcaligenes eutrophus AER5의 배양공학적 연구를 수행하였다. 상기 형질전환균주를 전구물질인 valerate가 10.0g/L첨가된 최소배지에서 2단계 배양한 결과 P(3HB-3HV)내의 3-HV 몰분율이 52.2 mol%로 모균주 A. eutrophus H16의 30 mol%에 비해 현저히 증가하였다. 이와 같은 몰분율의 증가는 phbC 유전자의 산물인 PHB synthase의 증폭과 밀접한 관련이 있음을 확인하였다. 2단계 회분배양시 fructose의 보충첨가의 영향을 검토하였으며, 적정농도인 10.0g/L의 fructose를 valerate와 같이 첨가할 경우 총균체량, p(3HB-3HV)의 축적농도, 그리고 축적율은 현저히 증가한 반면, 3-HV 몰분율은 다소 감소하는 경향을 보였다. $Mg^{2+}$ 이온은 P(3HB-3HV) 축적 에 매우 민감한 영향을 미쳤으며, 적정 농도로 판단되는 0.1 g/L일 경우 P(3HB- 3HV) 축적농도는 6.1 g/L, 그리고 3-HV 몰분율은 71.3 %로 현저히 증가하였다. 또한 적정 pH 조절제의 선정을 위하여 NaOH, NaOH와 (NH$_4$)$_2$SO$_4$의 혼합액, 그리고 NH$_4$OH을 비교 검토하였다. 2단계 배양법의 번거로움을 극복하고저 1단계 간헐적 유가식배양법을 검토한 결과, 배양 72시간 후 총균체량 19.2g/L, P(3HB-3HV) 축적농도 10.4 g/L, 그리고 3-HV 몰분율 35 mol%로 2단계 회분 배양법보다 우수한 결과를 얻었다. 이는 형질전환균주를 이용한 3-HV 몰분율이 높은 P(3HB-3HV)의 고농도 생산을 위한 배양조건 확립을 위한 기초자료로 활용될 것이다.90배의 살충력을 보였다. SDS-PAGE와 Western blot 분석에서도 클론 pHLN2-72는 재조합 클론 pHLN2-80(-)보다 약간 높게 ICP가 생성이 되었었다. 이상의 결과는 과다발현에 Plac프로모터와 종결부위가 반드시 필요하며, -72 bp ICP 프로모터가 -80 bp 프로모터보다 과다발현률이 높았으며, ICP 유전자는 반드시 Plac프로모터의 전사 방향에 역방향으로 삽입이 되어야 하는 것으로 나타났다.사용함으로써 고품질의 전통주류 생산이 가능하다고 사료된다.noicacid, methylmalonic acid, 2-methyl-4-keto-pentan-2-ol 등과 지방산의 일종인 tetradecanoic acid, hexadecane, hept-adecanoic acid, octadecanoic acid 등이 확인되었다.er 7.6mm. Further rich management measure and investigation were recommended such as sapling protection, signboard construction, soil erosion controlling and regular monitoring within the community.ldom changed at level 1.will cause students to form the mathematical concepts correctly. 3. By visualizing the process of drawing the quadratic function graph, students understand the quadratic function graph structually. 4. Through the feedback, the recognition ability of the trigonometric function can be improved. 5. It is possible to change

• ETRI Journal
• /
• 제37권3호
• /
• pp.523-532
• /
• 2015

Recently, we have witnessed the gradual miniaturization of electronic devices. In miniaturized devices, flip-chip bonding has become a necessity over other bonding methods. For the electrical connections in miniaturized devices, fine-pitch solder bumping has been widely studied. In this study, high-volume solder-on-pad (HV-SoP) technology was developed using a novel maskless printing method. For the new SoP process, we used a special material called a solder bump maker (SBM). Using an SBM, which consists of resin and solder powder, uniform bumps can easily be made without a mask. To optimize the height of solder bumps, various conditions such as the mask design, oxygen concentration, and processing method are controlled. In this study, a double printing method, which is a modification of a general single printing method, is suggested. The average, maximum, and minimum obtained heights of solder bumps are $28.3{\mu}m$, $31.7{\mu}m$, and $26.3{\mu}m$, respectively. It is expected that the HV-SoP process will reduce the costs for solder bumping and will be used for electrical interconnections in fine-pitch flip-chip bonding.

• 한국미생물·생명공학회지
• /
• 제24권1호
• /
• pp.92-100
• /
• 1996

For the production of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)(P(3HB-co-3HV)) from butyric acid and valeric acid, 10 strains of bacteria capable of producing P(3HB-co-3HV) were isolated from soil. Among them, the strain HJ-067 showed the best ability of producing P(3HB-co-3HV), and was indentified as a Azotobacter sp. For the production of P(3HB-co-3HV), the optimum concentrations of butyric and valeric acid were 3.0g/l, respectively. The most effective nitrogen source was $(NH_4)_{2}SO_4$ at an optimum concentration of 0.75g/l, which was equivalent to 21.36 in C/N ratio. Deficiency of the cationic metal ions ($Zn^{2+},\;Co^{2+},\;Mn^{2+}$) in the proguction medium had stimulating effect on P(3HB-co-3HV) accumulation, especially in the manganese. deficient medium. The optimum temperature for P(3HB-co-3HV) production was 27$^{\circ}C$ and the optimum initial pH was 7.0. Under the optimum conditions, 1.82g/l of P(3HB-co-3HV) and 3.00g/l of dry biomass were produced after 36 hour cultivation, and the P(3HB-co-3HV) yield and HV% were 60.60% (w/w), 15.92%, respectively.

• KSBB Journal
• /
• 제10권4호
• /
• pp.349-356
• /
• 1995

하수처리장의 활생오니를 분리원으로 하여 수십종의 PHA 생산균을 분리하였다. 일반적으로 hy­d droxyvalerate monomer unit의 전구물질로 알려져 있지않은 glucose로부터 비교적 많은 PHA를 생산 하는 균주를 공시균으로 선정하여 형태학척, 배양적, 생리학적 제 특성을 검토한 결과 Pseudomonas 속으 로 통정되었다. 균체 생육을 위한 최적 배양온도 벚 배양 pH는 각각 $37^{\circ}C$와 7.0이었으며, 최적 탄소원 으로셔 glucose 1 %, 최적 질소원으로서 $(NH_4)_2SO_4$ 0.2%, K1HPO. 0.3%, $KH_2PO_4$ 0.45% 였다. 최적 P PHA 생산조건을 조사하기 위하여 2단계 배양법을 이용하였다 PHA 생산은 배지성분중 $NH_4, O_4$, Mg가 결핍되 였을 때 향상되었고, 그중 $NH_4$, 의 결핍시 PHA 축적률과 HV monomer의 함량이 가장 높았다. C/N molar ratio 95.2에서 PHA 축적률이 가장 높았다. 공시균주 Pseudomonas sp. HJ는 alkane, alkanoic acid, alcohol을 탄소원으로 하여 P PHB/HV를 생산하였다. PHA의 생산량과 HV monomer의 함량은 이용된 기질에 따라 다양하였으며, 특히 hexadecane와 propiOnate를 탄소원으로 하였을 때 PHA중의 HV monomer의 함량이 49~74mol %로 매우 높았다. IH-NMR로셔 공시균으로 부터 분리정제된 PHA의 조성을 분석한 결과 PHB/ H HV copolymer임을 알 수 였였다

• 구강회복응용과학지
• /
• 제27권2호
• /
• pp.185-195
• /
• 2011

본 연구는 외부연결방식(external type)의 임프란트에서 기존의 타이타늄 지대주와 지르코니아 지대주를 각각의 임플란트와 연결하여 하중을 가한 후 임플란트 외부육각기둥(external hexgon)부분 및 platform 표면변화를 FESEM 상으로 관찰하고, 임프란트와 타이타늄 지대주 및 지르코니아 지대주의 Viker's 경도를 측정하였다. 1. 임프란트, 타이타늄 지대주 및 지르코니아 지대주의 Viker's 경도는 각각 평균 $309.80{\pm}11.78$ HV, $318.40{\pm}11.82$ HV, $1495.30{\pm}16.21$ HV였다. 임프란트와 타이타늄 지대주 사이에는 통계학적으로 유의성이 존재하지 않았지만(P>0.05, Anova), 임프란트와 지르코니아 사이에는 통계학적으로 유의성이 관찰되었다(P<0.05, Anova). 2. 10,000번 하중을 가한 후 임플란트 표면변화 관찰에서 타이타늄 지대주 그룹과 지르코니아 지대주 그룹 모두에서 마모가 관찰 되었으며, 지르코니아 지대주에서 보다 현저한 마모양상을 나타내었다. 본 연구에서 표면경도의 차이로 인하여 타이타늄 지대주를 사용할 때보다 지르코니아 지대주를 사용한 경우 임플란트의 external hexagon부분 및 플랫폼의 마모도가 현저하였다.

• 한국분말재료학회지
• /
• 제29권4호
• /
• pp.283-290
• /
• 2022

A Cu-15Ag-5P filler metal (BCuP-5) is fabricated on a Ag substrate using a high-velocity oxygen fuel (HVOF) thermal spray process, followed by post-heat treatment (300℃ for 1 h and 400℃ for 1 h) of the HVOF coating layers to control its microstructure and mechanical properties. Additionally, the microstructure and mechanical properties are evaluated according to the post-heat treatment conditions. The porosity of the heat-treated coating layers are significantly reduced to less than half those of the as-sprayed coating layer, and the pore shape changes to a spherical shape. The constituent phases of the coating layers are Cu, Ag, and Cu-Ag-Cu3P eutectic, which is identical to the initial powder feedstock. A more uniform microstructure is obtained as the heat-treatment temperature increases. The hardness of the coating layer is 154.6 Hv (as-sprayed), 161.2 Hv (300℃ for 1 h), and 167.0 Hv (400℃ for 1 h), which increases with increasing heat-treatment temperature, and is 2.35 times higher than that of the conventional cast alloy. As a result of the pull-out test, loss or separation of the coating layer rarely occurs in the heat-treated coating layer.

• Journal of Microbiology and Biotechnology
• /
• 제3권2호
• /
• pp.115-122
• /
• 1993

Poly(3-hydroxybutyrate)(P(3HB)) accumulation under nutrient-rich condition with various amounts of $(NH_4)_2 SO_4$ was systematically investigated. The results of the electron-microscopy and the solvent extraction showed that the P(3HB) accumulation is unavoidable even under nutrient-rich condition. This indicates that in a two-step culture of Alcaligenes eutrophus H16, the researches should be careful in interpreting the data of polyhydroxyalkanoates(PHAs) accumulation in terms of the carbon-source fed in the second step because the two-step culture product contains the P(3HB) produced under nutrient-rich condition. The polyester production capability in a two-step batch culture of A. eutrophus H16(ATCC 17699) was also investigated using various saccharides and their derivatives such as glucose, fructose, gluconic acid, glucaric acid, sorbitol, lactose, galactose, and mannose. The polyesters synthesized were characterized by 500 MHz$^{1}H-NMR$ spectroscopy, intrinsic viscosity$[\eta]$ measurement in chloroform and differential scanning calorimetry(DSC). 500 MHz $^{1}H-NMR$ analysis showed that all polyesters synthesized generally contained 1~2 mol% of 3HV. Another finding is that the glucose utilization can be increased by changing the autoclaving procedure of the substrate to enhance the P(3HB) production yield up to 46 wt% of P(3HB) in dry cells.

• 한국표면공학회지
• /
• 제25권4호
• /
• pp.189-206
• /
• 1992

The effect of activation and electroless nickel plating conditions on contact properties was investi-gated for selective electroless nickel plating of Si wafers in order to obtain an optimum condition of con-tact hole filling. According to RCA prosess, p-type silicon (100) surface was cleaned out and activated. The effects of temperature, DMAB concentration, time, and strirring were investigated for activation of p-type Si(100) surface. The optimal activation condition was 0.2M HF, 1mM PdCl2, 2mM EDTA,$ 70^{\circ}C$, and 90sec under ultrasonic vibration. In electroless nickel plating, the effect of temperature, DMAB concentra-tion, pH, and plating time were studied. The optimal plating condition found was 0.10M NiSO4.H2O, 0.11M Citrate, pH 6.8, $60^{\circ}C$, 30minutes. The contact resistance of films was comparatively low. It took 30minutes to obtain 1$\mu\textrm{m}$ thick film with 8mM DMAB concentration. The film surface roughness was improved with decreasing temperature and decreasing pH of the plating solution. The best quality of the film was obtained at the condition of temperature $60^{\circ}C$ and pH 6.0. The micro-vickers hardness of film was about 800Hv. Plating rate of nickel on the hole pattern was slower than that of nickel on the line pattern.

• 한국미생물·생명공학회지
• /
• 제24권3호
• /
• pp.344-351
• /
• 1996

Microorganisms growing alcoholic distillery wastes were isolated from soil. Of them, the selected strain EL-9 had a capability of accumulating poly-$\beta$-hydroxybutyrate (PHB) when grown in alcoholic distillery wastes. The strain EL-9 was identified as a genus Actinobacillus based on the morphological, cultural, and biochemical characteristics. The strain EL-9 was named temporarily as Actino- bacillus sp. EL-9. The optimal temperature and pH for cell growth of Actinobacillus sp. EL-9 were 30$\circ$C and 7.0, respectively. The optimal medium compositions for cell growth comprised glucose 2%, NH$_{4}$NO$_{3}$ 0.15%, Na$_{2}$HP0$_{4}$-12H$_{2}$O 0.25%, KH$_{2}$PO$_{4}$ 0.25%, MgSO$_{4}$4-7H$_{2}$O 0.15%, FeSO$_{4}$-7H$_{2}$O 0.005%, CaCl$_{2}$-2H$_{2}$O 0.003% and trace element solution 5m/l. To investigate the optimal conditions for PHB production, two-stage culture technique was used. The result showed that the optimal conditions for PHB production are identical those for cell growth. When propionic acid was added as a cosubstrate, PHB/HV copolymer was produced.

• 한국지역사회생활과학회지
• /
• 제14권2호
• /
• pp.125-130
• /
• 2003

To develop natural dyeing materials from the unused plant materials, we had several dyeing experiments to investigate the optimum conditions of dyeing fabrics with the dyebath extracted from wisteria. Dyeing experiments were done under different dyeing conditions of dyeing temperature, pH of dyebath, dyeing time, concentration of dyebath and mordant treatment which were treated after dyeing. Experimental fabrics were silk, wool, cotton, ramie and hemp. Color difference(ΔE) and Munsell's HV/C of the dyed fabrics and color fastness of silk and cotton fabrics to dry cleaning, washing, rubbing, perspiration and light were measured. In silk and wool fabrics(non mordant, dyeing time-20min), color differences increased in case of dyeing temperature of $100^{\circ}C$, but in cotton, ramie and hemp fabrics, color differences did not increase. Without mordant treatment, color differences of all experimental fabrics were about 10-20, so in wisteria dyeing mordant treatment was necessary. Color differences were increased by the mordant treatment; the color of dyed fabrics with Al mordant is dull yellow, Cu mordant is gold and Fe mordant is olive tone. Color difference was not affected by pH of dyebath in all experimental fabrics. On the whole, the color fastness of dyed silk and cotton fabrics were good, but color fastness to washing and perspiration in Fe mordant was weak and improved in Cu mordant.