• Applied Microscopy
• /
• 제35권4호
• /
• pp.98-104
• /
• 2005

초고전압 투과전자현미경 (HVEM)에 장착된 postcolumn 방식의 HV-GIF (high voltage gatan image filter)의 영상기록 장치인 HV-MSC (high voltage multi-scan CCD, $1024{\times}1024$픽셀) 카메라의 결상영역은 현미경 최소 관찰 배율인 2,000배에서 $0.43{\mu}m^2$로서 동일 배율에서 필름 기록영역($2000{\mu}m^2$)에 비해 약 0.02%에 해당하는 매우 적은 영역이다. 이러한 결상 영역 제한성을 개선하고자 투사렌즈 전류조절 기법을 도입하였으며 본 연구의 결과로 HV-MSC의 결상영역은 $112{\mu}m^2$로 비약적으로 증가하였다. 이는 약 8,800배에서 필름으로 기록할 수 있는 영역과 동일하였다. 이와 더불어 투사렌즈 조절에 따른 이미지 변형정도를 약 5%이하까지 허용하고 8,800배 이상에서 필름 기록영역과 동일한 HV-MSC 결상영역을 확보할 수 있는 실험적인 참조곡선을 고안하였다.

• 전기전자학회논문지
• /
• 제18권3호
• /
• pp.335-340
• /
• 2014

친환경 및 에너지 효율에 대한 관심이 증대되고 있는 가운데 LED(Light Emitting Diode)는 제어방식이 정 전류구동과 SMPS(Switching Mode Power Supply)방식으로 구동하므로 소형화 및 경량화를 이룰 수 있고 전력 소모가 적으며 효율이 높아 광원 및 조명장치에 활용하는데 유용하다. LED 생산업체는 고출력 LED 모듈의 칩 설계 원천기술의 확보가 필요하고, LED 를 조명으로 적용시키기 위해 전력손실을 줄일 수 있는 고출력 LED 모듈 개발을 위한 구동회로 설계와 역률 개선의 방안 연구가 필요하다. 산업현장에서 교류(AC) 직결 LED 구동소자인 HV9910를 일반적으로 사용하고 있다. 본 논문에서 HV9910에 PFC와 Noise Filter를 추가한 구동회로의 역률 및 효율에 대한 개선방법을 시뮬레이션을 통해 검증하는데 있다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 전력전자학술대회
• /
• pp.186-188
• /
• 2018

In this paper, a single-phase multifunctional onboard battery charger with small DC-link capacitors is proposed, where the low-voltage battery charger is utilized as an active power filter to mitigate the inherent second-order ripple power when the high-voltage (HV) battery is charged from the grid. In this scheme, the large DC-link electrolytic capacitors of the HV battery charger can be eliminated without additional switches, leading to the reduction of cost and volume of the onboard battery charger. The validity of the proposed topology has been verified by the simulation results.

• Journal of Power Electronics
• /
• 제19권2호
• /
• pp.394-402
• /
• 2019

This paper proposes a single-phase non-isolated onboard battery charger (OBC) for electric vehicles (EVs) that only uses small film capacitors at the DC-link of the AC-DC converter. In the proposed charger, an isolated DC-DC converter for low-voltage batteries is used as an active power decoupling (APD) circuit to absorb the ripple power when a high-voltage (HV) battery is charged. As a result, the DC-link capacitance in the AC-DC converter of the HV charging circuit can be significantly reduced without requiring any additional devices. In addition, some of the components of the proposed circuit are shared in common for the different operating modes among the AC-DC converter, LV charging circuit and active power filter. Therefore, the cost and volume of the onboard battery charger can be reduced. The effectiveness of the proposed topology has been verified by the simulation and experimental results.

• 비파괴검사학회지
• /
• 제33권2호
• /
• pp.212-218
• /
• 2013

A transfer method of neutron radiography was developed to measure the size of the end plug and a gap of an intact K102L-2, the irradiated fuel of a ballooned K174L-3, a ballooned and ruptured K98L-3. A typical irradiation time of 25 min. was determined to obtain a film density of between 2 and 3 of SR X-ray film with neutrons of $1.5{\times}10^{11}n{\cdot}cm^{-2}$. To validate and calibrate the results, a RISO fuel standard sample, Cd plate and ASTM-BPI/SI were used. An activated latent image formed in the $100{\mu}m$ Dy foil was subsequently transferred in a dark room for more than 8 hours to the SR film which is a maximum of three half-lives. Due to the L/D ratio an unsharpness of $9.82-14{\mu}m$ and a magnification of 1.0003 were given. After digitizing an image of SR film, the ballooning gap of the plug was discernible by an H/V filter of image processing. The gap size of the ballooned element, K174L-3, is equal to or greater than 1.2 mm. The development of a transfer method played a pivotal role in developing high burn-up of Wolsung and PWR nuclear fuel type.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.1009-1011
• /
• 1992

This paper discribes a study on the bridge type power converter for laser high power generator with high frequency and high voltage using MOS-GTO. This converter effectively makes the best of the high frequency HV transformer and input-side equivalent parasitic capacitance of high voltage feeding cable in place of DC output smoothing filter. The cicuit configuration and performance are discussed and design criteria are given. The prototype rated of 10 KW, 100 KHz is implemented and experimental results are given.

• 인터넷정보학회논문지
• /
• 제9권1호
• /
• pp.33-41
• /
• 2008

워터마킹 분야의 많은 연구 가운데 최근 JPEG2000과의 호환성, 다중해상도 분해, HVS에 기반한 시스템의 구현 등의 이점으로 웨이블릿 변환 기반 알고리즘에 관한 연구가 활발히 이루어지고 있다. 그러나 대부분 강인성 등에 중점을 두고 이론적 측면만을 지나치게 강조하여 복잡하고 실제적으로 적용하기 곤란한 면이 있다. 본 논문에서는 대용량의 많은 데이터를 대상으로 로고를 워터마크로 이용하는 강인한 워터마킹 알고리즘을 제안한다. 제안된 알고리즘은 웨이블릿 2단계 변환을 수행하며 랜덤 치환을 위해 LFSR을 채택하였으며 원영상과 랜덤 치환된 워터마크 영상을 $8{\times}8$ 블록으로 나누어 '1'의 순서로 매핑하여 워터마크를 삽입한다. 실험결과로 성공적으로 워터마크가 삽입되어 가시적으로 워터마크가 드러나지 않으며 JPEG 압축, 저주파 필터, 고주파 필터, 밝기 변화 둥의 영상 처리에 강인성이 있음을 보여 준다.

• 대한원격탐사학회지
• /
• 제25권6호
• /
• pp.531-546
• /
• 2009

The main objective of this study is to analyse the polarimetric characteristics of the various terrain targets by ground-based polarimetric SAR system and to confirm the compatible and effective polarimetric analysis method to reveal the polarization properties of different terrain targets by the GB-SAR. The fully polarimetric GB-SAR data with HH, HV, VH, and VV components were focused using the Deramp-FFT (DF) algorithm. The focused GB-SAR images were processed by the H/A/$\alpha$ polarimetric decomposition and the combined H/$\alpha$ or H/A/$\alpha$ and Wishart classification method. The segmented image and distribution graphs in H/$\alpha$ plane using Cloude and Pottier's method showed a reliable result that this quad-polarization GB-SAR data could be useful to classified corresponding scattering mechanism. The H/$\alpha$-Wishart and H/A/$\alpha$-Wishart classification results showed that a natural media and an artificial target were discriminated by the combined classification, in particular, after applying multi-looking and the Lee refined speckle filter.

• 한국물환경학회지
• /
• 제22권2호
• /
• pp.321-327
• /
• 2006

This interlaboratory study was designed to evaluate protozoan test methods in water and to predict the major causes of deviation of the methods. Each of four laboratories with previous experience of protozoa analysis in water participated, and met the initial performance criteria of EPA 1623 method provided. The protozoan analysis procedure consists of filtrations, concentration, immunomagnetic separation, dyeing (staining) and counting with observation. We tested three different filtration equipments: capsule filter for 10 L of surface water, and high volume (HV) capsule filter and membrane filter for 100 L of finished water. When the recovery of each step of the procedure was evaluated with EasySeed, the commercial stock of each 100 Cryptosporidium and Giardia, immunomagnetic separation and filtration step were the most crucial steps affecting the stability of the recovery, especially for Cryptosporidium. There was no significant difference of recovery among the filtration methods. Recovery of protozoa from source water were evaluated with spiked EasySeed as matrix tests. The recoveries of Giardia increased significantly in the matrix tests compared those in the deionized water. We also applied red stained mixture stocks of Cryptosporidium and Giardia called ColorSeed as internal standards of water sample tests. The recoveries of both EasySeed and ColorSeed in samples tested were within the range of the criteria, however, the Giardia recoveries using ColorSeed decreased significantly. Further optimization study with ColorSeed will be necessary, considering the convenience of using the internal standard without additional sample analysis. The significant factors of the recovery variation were identified as the differences of laboratories as well as water quality and type of the stock for spiking. The results of this study emphasize the importance of the quality assurance program for protozoan analysis lab in water.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1867-1869
• /
• 2003

In this paper, chamber(Circuit breaker compartment of C-GIS) made of stainless steel with 4 mm width is used. Artificial defect was made on enclosure or HV conductor of chamber and $SF_6$ gas was injected into it according to pressure. In this experiment, Acoustic emission sensors of different types was used to compare sensitivity to detect acoustic signal occurred by Partial discharge(PD) of according to types and resonance frequency in $SF_6$ gas atmosphere. Sensors used in tests was R6I, R15I and 2/4/6 Pre-Amplifier connected with R6IU without pre. amp. In case of R6IU, gain was adjusted with 40 dB like other sensors and operated by differential mode. Post amplifier(post. amp) and band pass filter(BPF) were developed Gain of post. amp. is 60 dB and BPF has band width of $50{\sim}300$ kHz. Also, envelope circuit developed reduces frequency of AE sensor. As a result, in $SF_6$ atmosphere, R6IU and R6I had resonance frequency of 60 Hz was better than R15I. Also, R6IU was better than R6I because of type property of pre.amp. had differential mode.