• Journal of Conservation Science
• /
• v.26 no.3
• /
• pp.269-276
• /
• 2010

This study aims to extract manufacturing techniques by analysing metallurgical characteristics of the cast-iron pot from Bubjusa, examining corrosion status and microstructure with a optical microscope, SEM-EDS, micro vickers hardness tester and XRD. The microstructure analysis has presented that ferrite and partial portion of pearlite exist within the corroded outer layer. The analysis of the inner layer revealed that there is pearlite and graphite of feather shape. The one of the middle layer, which is placed between outer and inner layer, showed that corrosion has been heavily developed. Micro vickers hardness values range from 217Hv to 698Hv in constituent layers and such values lie within the ranges of the ancient iron relics. The result of EDS analysis for each microstructure presented that the outer layer has been more decarbonized than the inner layer. XRD analysis of iron corrosion compound revealed that Goethite and Hematite had been produced from the corrosive process of iron. The study concludes that the large iron pot was made by casting technique, and microstructure of inner layer had a gray cast iron. Outer layer has been decarbonized through repetitive process of heating and cooling. This results can be used as fundamental data for comparative study to reveal manufacturing techniques of large cast-iron pot.

• Korean Journal of Psychosomatic Medicine
• /
• v.17 no.1
• /
• pp.23-29
• /
• 2009

Objectives : This research is to figure out the neurofeedback treatment for the inattentive children is effective in improving attention deficit and furthermore, in relieving hyperactivity and impulsivity. Methods : 20 children subjects participated for this study. C3-A1 protocol neurofeedback was given 15 to 20 times to each child, it is carried out to compare the degree of attention in each case every 5 times of neurofeedback by using ADHD Rating Scale-IV : Parent Version(ARS) and Attention Deficit Disorder Evaluation Scale-Home Version(ADDES-HV). Results : The subscale of mean inattention score of ARS was reduced from 14.2 to 8.8 significantly(p<0.05) after 20 sessions of neurofeedback treatment, also the subscale of mean impulsivity/hyperactivity score of ARS from 13.3 to 7.1. The subscales of mean inattention, impulsivity and hyperactivity score of ADDES-HV was also reduced significantly(p<0.05) after 20 sessions of neurofeedback treatment. The changes of scores appeared significantly(p<0.05) from 10-15 sessions of neurofeedback treatment. Conclusion : The results of this study suggest that neurofeedback can improve children's attention deficit, hyperactivity and impulsivity, there exists the possibility of being a method to treat ADHD.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.2
• /
• pp.173-180
• /
• 2013

Compacted graphite iron(CGI), also known as vermicular graphite iron, is a metal which is gaining popularity in applications that require either greater strength, or lower weight than cast iron. Recently compacted graphite iron has been used for diesel engine blocks. Considering that using in exhaust manifold of the diesel engine, CGI340 was conducted the heat treatment during 1 hour to 96 hours from 873 to 1273 K. Mechanical characteristics were evaluated. The obtained results are as follows; The tensile strength of the heat treated specimens showed overall lower tensile strength than that of the base metal. Tensile strength decreases with increasing of heat treatment time, and the higher heat treatment temperature and the longer time, were more reduced. The fatigue limit by the ultrasonic fatigue test was approximately 130 MPa of base metal, 100 MPa of 1173 K (96 hrs) specimen, respectively. The hardness decreases with increasing heat treatment time, and the higher the heat treatment temperature was lowered hardness distribution. In CGI340, average hardness of nodular graphite was 120 Hv, average hardness of vermicular graphite was 114 Hv. This showed lower hardness than the base structure ferrite. The nodular graphite and vermicular graphite according to the heat treatment temperature and time didn't have a consistent change. However, the grain size of base structure grew with increasing of heat treatment time.

• Journal of Life Science
• /
• v.19 no.12
• /
• pp.1829-1835
• /
• 2009

Hyperventilation (HV) is routinely induced in order to activate brain waves during an electroencephalogram (EEG). The aim of this study was to examine the effects of HV conditions on EEG and suggested basic data for the standardized procedure. Three degrees of HV were induced for 5 minutes with a ventilation volume of 160 ml/min (control group), 240 ml/min, and 300 ml/min in rats. Powers of delta, theta, alpha, and beta waves were examined by a quantitative EEG. The results showed that there was no significant difference in the powers of all EEG waves between the control and 240 ml/min groups. However, a notable change in EEG powers during HV induced by a ventilation volume of 300 ml/min was observed in the frontal cerebral region as follows: power of the delta was increased by 12.8% (p<0.01), powers of the theta, alpha and beta were decreased by 41.3% (p<0.01), 48.6% (p<0.05), and 41.9% (p<0.05), respectively. Therefore, it is concluded that an increase of about 90% of the normal ventilation volume might be adequate for the hyperventilation, and a useful parameter for evaluation of the qualified hyperventilation might be an alteration of the frontal EEG powers.

• Korean Journal of Remote Sensing
• /
• v.35 no.6_1
• /
• pp.999-1009
• /
• 2019

The importance of high-resolution sea ice maps of the Arctic Ocean is increasing due to the possibility of pioneering North Pole Routes and the necessity of precise climate prediction models. In this study,sea ice classification algorithms for two deep learning models were examined using Sentinel-1 A/B SAR data to generate high-resolution sea ice classification maps. Based on current ice charts, three classes (Open Water, First Year Ice, Multi Year Ice) of training data sets were generated by Arctic sea ice and remote sensing experts. Ten sea ice classification algorithms were generated by combing two deep learning models (i.e. Simple CNN and Resnet50) and five cases of input bands including incident angles and thermal noise corrected HV bands. For the ten algorithms, analyses were performed by comparing classification results with ground truth points. A confusion matrix and Cohen's kappa coefficient were produced for the case that showed best result. Furthermore, the classification result with the Maximum Likelihood Classifier that has been traditionally employed to classify sea ice. In conclusion, the Convolutional Neural Network case, which has two convolution layers and two max pooling layers, with HV and incident angle input bands shows classification accuracy of 96.66%, and Cohen's kappa coefficient of 0.9499. All deep learning cases shows better classification accuracy than the classification result of the Maximum Likelihood Classifier.

• Journal of the Korean institute of surface engineering
• /
• v.40 no.6
• /
• pp.254-257
• /
• 2007

TiN coating on tool steel has been widely used for the improvement of durability of tools. In this work, radical nitriding(RN) is carried out on SKD61 at $450^{\circ}C$ for 5 hours in the ammonia gas pressure $2.7{\times}10^3\;Pa$. The TiN coating is carried out by arc ion plating(AIP) with the process parameters: arc power 150 A, bias voltage -50V, coating time 40 minutes and nitrogen gas pressure $4{\times}10^3\;Pa$. Hardness, elastic modulus, friction coefficient and adhesion of TiN coating on substrates of both TiN/SKD61 and TiN/RN SKD61 coatings are investigated comparatively. The primary crystalline faces of TiN surface are(200) and(111) for TiN/SKD61 and TiN/RN SKD61 respectively. In addition to the primary phase, Fe phase exists in TiN/SKD61 coating, but not in TIN/RN SKD61. The hardness of TiN/RN SKD61 is about 700 Hv, 250 Hv(56%) higher than that of TiN/SKD61 at the near interface of TiN and substrates. At the TiN surface, hardness of TiN/RN SKD61 is 2,149 Hv, 71 Hv(3%) higher than that of TiN/SKD61. The elastic modulus of TiN coating is improved to 26.7 GPa(6%) by radical nitriding. The adhesion is improved by the RN coating showing no spalling. buckling and chipping on the scratch test track which are shown on the non-RN TiN/SKD61.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.8
• /
• pp.1868-1876
• /
• 2010

In this paper, we design a 256-bit EEPROM IP using only logic process-based devices. We propose EEPROM core circuits, a control gate (CG) and a tunnel gate (TG) driving circuit, to limit the voltages between the devices within 5.5V; and we propose DC-DC converters : VPP (=+4.75V), VNN (-4.75V), and VNNL (=VNN/3) generation circuit. In addition, we propose switching powers, CG_HV, CG_LV, TG_HV, TG_LV, VNNL_CG, VNNL_TG switching circuit, to be supplied for the CG and TG driving circuit. Simulation results under the typical simulation condition show that the power consumptions in the read, erase, and program mode are $12.86{\mu}W$, $22.52{\mu}W$, and $22.58{\mu}W$ respectively. Furthermore, the manufactured test chip operated normally and generated its target voltages of VPP, VNN, and VNNL as 4.69V, -4.74V, and -1.89V.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.1
• /
• pp.24-31
• /
• 2021

We report structural, mechanical, and thermal properties of diecast ADC12 aluminum alloys characterized using synchrotron X-ray diffraction (XRD), scanning electron microscopy, energy dispersive X-ray (EDX) analysis, thermal conductivity (λ), Vickers hardness (Hv), and stress-strain measurements. We also studied the effect of post-annealing performed in a vacuum atmosphere on the mechanical properties of diecast ADC12 alloys. EDX and XRD results revealed that Al2Cu and AlCu3 grains are formed, well dispersed in Al base and highly crystalline. Ultimate tensile strength (UTS) of 307.9 ± 9.1 MPa and elongation of 2.98 ± 0.62 % were estimated. λ was 129.3 ± 0.27 W/m·K and Hv was approximately 130. Both values were significantly higher than the reported values. At annealing temperatures ranging from 25 to 200℃, UTS and Hv values remained constant, while as the annealing temperature increased to 500℃, these values gradually decreased. This is because stabilization of the microstructure improves toughness and ductility.

• Conservation Science in Museum
• /
• v.29
• /
• pp.81-98
• /
• 2023

This study was conducted to examine the effect of the light source for the media facade of the 10-story Gyeongcheonsa Stone Pagoda on the pagoda's restoration materials. To restore the pagoda, two types of epoxy resin-L-30, Araldite (AW106, and HV953U)-were used, and the photostability of the restoration materials and the acceptable lighting irradiation time were estimated through accelerated aging experiments of the restoration specimens. Six types of specimens were used in this process: a specimen painted with blue and yellow pigments for each resin type, and an unpainted specimen. Among them, the ΔE of the unpainted specimens (BA) of Araldite AW106 and HV953U was the highest of 4.66, and the acceptable light irradiation time was about 130,000 hours if the change rate of ΔE is limited to about 1. It was confirmed that the BA specimens were losing their characteristics due to light, as their reflectance and transmittance increased and the absorbance decreased, making them more transparent than their original color. It was found that the painted specimens had a low change rate of ΔE, with insignificant changes in their reflectance, transmittance and absorbance. Therefore, the use of pigments with high photostability provides more restoration materials options.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2003.10a
• /
• pp.80-81
• /
• 2003