• 제목/요약/키워드: HP20

검색결과 363건 처리시간 0.031초

Preparation and Characterization of Proton Conducting Composite Membranes From P(VDF-CTFE)-g-PSPMA Graft Copolymer and Heteropolyacid

  • Seo, Jin-Ah;Roh, Dong-Kyu;Koh, Jong-Kwan;Kim, Jong-Hak
    • Korean Membrane Journal
    • /
    • 제10권1호
    • /
    • pp.20-25
    • /
    • 2008
  • Proton conducting composite membranes were prepared by solution blending of poly(vinylidene fluoride-co-chlorotrifluoroethylene)-graft-poly(sulfopropyl methacrylate) (P(VDF-CTFE)-g-PSPMA) graft copolymer and heteropolyacid (HPA). The P(VDF-CTFE)-g-PSPMA graft copolymer was synthesized by atom transfer radical polymerization (ATRP) using direct initiation of the secondary chlorines of P(VDF-CTFE). FT-IR spectroscopy revealed that HPA nanoparticles were incorporated into the graft copolymer via hydrogen bonding interactions. The water uptake of membranes continuously decreased with increasing HP A concentration up to 45wt%, after which it slightly increased. It is presumably due to the decrease in number of water absorption sites due to hydrogen bonding interaction between the HP A particles and the polymer matrix. The proton conductivity of membranes increased with increasing HPA concentration up to 45wt%, resulting from both the intrinsic conductivity of HP A particles and the enhanced acidity of the sulfonic acid of the graft copolymer.

Fatigue and Wear Properties of Semi-Liquid Formed SiCp/AZ91HP Mg Composites (반용융 성형가공한 SiCp/AZ91HP Mg복합재료의 피로 및 내마모 특성)

  • Ha, Hong-Soo;Kim, Myoung-Gyun;Ahn, Sun-Kyu;Lim, Byeong-Soo;Kim, Young-Jig
    • Journal of Korea Foundry Society
    • /
    • 제17권5호
    • /
    • pp.472-479
    • /
    • 1997
  • The effect of size and mass fraction of SiC particulate on the fatigue and wear have been investigated for semi-liquid formed SiCp/AZ91HP Mg composites. In the study, different particulate sizes of 7, 20, $50 {\mu}m$ were prepared with various mass fraction for sample preparation. By tension-tension fatigue tests, whose procedures are standardized in ASTM standard 647E-93, the da/dN vs. ${\Delta}K$ curves were obtained. Also, the crack propagation paths were observed by optical microscope. As a result of wear test, specific wear loss is decreased with increasing mass fraction and particulate size. Specific wear loss of 30 mass% $50 {\mu}m$ SiC reinforced Mg composite is compared to SKD11.

  • PDF

Photosynthesis, Growth and Yield Characteristics of Peucedanum japonicum T. Grown under Aquaponics in a Plant Factory (식물공장형 아쿠아포닉스에서 산채 갯기름의 광합성, 생육 및 수량 특성)

  • Lee, Hyoun-Jin;Choi, Ki-Young;Chiang, Mae-Hee;Choi, Eun-Young
    • Journal of Bio-Environment Control
    • /
    • 제31권1호
    • /
    • pp.67-76
    • /
    • 2022
  • This study aimed to determine the photosynthesis and growth characteristics of Peucedanum japonicum T. grown under aquaponics in a plant factory (AP) by comparing those grown under hydroponic cultivation system (HP). The AP system raised 30 fishes at a density of 10.6 kg·m-3 in a 367.5 L tank, and at HP, nutrient solution was controlled with EC 1.3 dS·m-1 and pH 6.5. The pH level ranged from 4.0 to 7.1 for the AP system and 4.0 to 7.4 for the HP system. The pH level in the AP began to decrease with an increase in nitrate nitrogen (NO3-N) and lasted bellower than pH 5.5 for 15-67 DAT. It was found that ammonium nitrogen (NH4-N) continued to increase even under low pH conditions. EC was maintained at 1.3 to 1.5 dS·m-1 in both systems. The concentration of major mineral elements in the fish tank was higher than that of the hydroponics, except for K and Mg. There was no significant difference in the photosynthesis characteristics, but the PIABS parameters were 30.4% lower in the AP compared to the HP at the 34DAT and 12.0% lower at the 74DAT. There was no significant difference in the growth characteristics, but the petiole length was 56% longer in the leaf grown under the AP system. While there was no significant difference in the fresh and dry weights of leaf and root, the leaf area ratio was 36.43% higher in the AP system. All the integrated results suggest that aquaponics is a highly-sustainable farming to safely produce food by recycling agricultural by-products, and to produce Peucedanum japonicum as much as hydroponics under a proper fish density and pH level.

The effects of temperatures on the development of Oriental -tobacco budmoth, Heliothis assulta Guenee, and control effects of Thuricide $HP^{(R)}$- (고추담배나방의 생태 및 방제에 관한 연구 -온도가 담배나방의 생육에 미치는 영향 및 Thuricide $HP^{(R)}$의 방제 효과-)

  • Chung C. S.;Hyun J. S.
    • Korean journal of applied entomology
    • /
    • 제19권1호
    • /
    • pp.57-65
    • /
    • 1980
  • The oriental tobacco budmoth, Heliothis assulta Guenee were reared under various temperatures; $20^{\circ}C,\;25^{\circ}C,\;30^{\circ}C$ and the control effects of Thuricide $HP^{(R)}$ were examined. The results obtained were as fellows: 1. The adult longevity of oriental tobacco budmoth was 11.35 days, and 3.00 days for preovipositional period, 4.75 days for ovipositional Period, and 3.50 days for postovipositional period. 2. The total number of eggs laid by a female were 307 at $20^{\circ}C$, 413 at $25^{\circ}C$ and 189 at $30^{\circ}C$. The number of eggs per female per day were 64.05 in average. 3. The average egg Periods were 7.71 days at $20^{\circ}C$, 4.12 days at $25^{\circ}C$ and 3.58 days at $30^{\circ}C$ and the hatchiabilities were $71.25\%,\;78.49\%\;and\;81.05\%$ at the respective incubation temperatures. 4. The larval developmental periods were 43.51 days at $20^{\circ}C$, 21.79 days at $25^{\circ}C$ and 18.05 days at $25^{\circ}C$ and the mortalities were $80.70\%,\;95.93\%$ and $87.01\%$ at the respective temperatures. 5. The pupal developmental periods were 24.22 days at $20^{\circ}C$, 12.36 days at $25^{\circ}C$ and 11.50 days at $30^{\circ}C$ and the mortalities at the respective temperatures were $18.18\%,\;42.11\%\;and\;40.00\%$. 6. The calculated threshold temperatures for the development were $11.61^{\circ}C$ for the eggs, $11.96^{\circ}C$ for the larvae, and $10.06^{\circ}C$ for the pupae. The estimated total effective temperatures were 60.41 day degrees for e eggs, 319.35 day degrees for the larvae, 222.66 day degrees for the pupae, and overall total effective temperatures, however, would be ranged 640-660 day degrees if the reproductive period of the adult was considered. 7. The relationship between the overall developmental periods and the rearing temperature could be Y=-4.272X+155.39 (r=0.9105), where Y; number of days required to complete the life cycle, X; treated temperatures. 8. The control effects of Thuricide $HP^{(R)}$ were $73.43\%$ for spray and $58.22\%$ for bait applications.

  • PDF

Effects of Hydrothermal Pretreatment on the Nutritional Values and In Vitro Fermentation Characteristics of Tall Fescue (Festuca arundinacea) and Corn Silage (열수 전처리에 따른 톨페스큐와 옥수수 사일리지의 영양적 가치와 in vitro 발효특성에 미치는 영향)

  • Kim, Dong Hyeon;Son, Jun Kyu;Lee, Ji Hwan;Kim, Sang Bum;Park, Beom Young;Kim, Doo San;Jang, Gul Won;Lim, Hyun Joo;Hur, Tai Young;Kim, Eun Tae
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • 제22권1호
    • /
    • pp.468-476
    • /
    • 2021
  • This study examined the effects of a hydrothermal pretreatment (HP) on the nutritional values and in vitro fermentation characteristics of tall fescue and corn silage. This study was conducted through a factorial design of 2 (control or HP) × 2 (hay; tall fescue or silage; corn). For the HP, forage was placed into a glass bottle with 20% w/v of water, and the glass bottle was sealed and heated to reach a temperature of 121℃ (0.12 MPa). The solid residue and liquid were collected and oven-dried at 65℃ for three days. The dried materials were tested for in vitro fermentation at 39℃ for 24 and 48 h. The content of ADF increased significantly regardless of the forage type. After in vitro incubation for 24 h, the total VFA content was significantly lower after HP, regardless of the forage type (p ≤ 0.05), and the propionate concentration was increased in corn silage with HP (p ≤ 0.05). After 48 hours of in vitro incubation, the propionate content increased significantly (p ≤ 0.03) in corn silage with HP (p ≤ 0.05), but the butyrate content decreased significantly (p ≤ 0.05). There was no change in the in vitro dry matter and neutral detergent fiber digestibility by HP regardless of the forage type. Therefore, the use of hydrothermally pretreated corn silage could be advantageous for the supply of energy for ruminants.

Early Life Factors Influencing the Risk of Obesity

  • Lifschitz, Carlos
    • Pediatric Gastroenterology, Hepatology & Nutrition
    • /
    • 제18권4호
    • /
    • pp.217-223
    • /
    • 2015
  • The obesity epidemic is a worldwide problem. Factors predisposing to obesity include genetics, race, socioeconomic conditions, birth by cesarean section, and perinatal antibiotic use. High protein (HP) content in infant formulas has been identified as a potential culprit predisposing to rapid weight gain in the first few months of life and leading to later obesity. In a large multicountry study the effects of lower protein (LP) formula (1.77 and 2.2 g protein/100 kcal, before and after the 5th month, respectively) were compared to those of higher protein (2.9 and 4.4 g protein/100 kcal, respectively). Results indicated that at 24 months, the weight-for-length z score of infants in the LP formula group was 0.20 (0.06, 0.34) lower than that of the HP group and was similar to that of the breastfed reference group. The authors concluded that a HP content of infant formula is associated with higher weight in the first 2 years of life but has no effect on length. LP intake in infancy might diminish the later risk of overweight and obesity. At 6 years of age HP children had a significantly higher body mass index (by 0.51; 95% confidence interval [CI], 0.13-0.90; p=0.009) and a 2.43 (95% CI, 1.12-5.27; p=0.024) fold greater risk of becoming obese than those who received the LP. In conclusion, several factors may influence development of metabolic syndrome and obesity. Breastfeeding should always be encouraged. An overall reduction of protein intake in formula non breastfed infants seems to be an additional way to prevent obesity.

Utilization of the Bombyx mori Hypothetical Protein 32 Promoter for Efficient Transgene Expression

  • Goo, Tae-Won;Kim, Sung-Wan;Kim, Seong-Ryul;Park, Seung-Won;Kang, Seok-Woo;Lee, Kwang-Gill;Kwon, O-Yu;Yun, Eun-Young
    • International Journal of Industrial Entomology and Biomaterials
    • /
    • 제20권2호
    • /
    • pp.107-114
    • /
    • 2010
  • For stable germline transformation, the promoter of Bombyx mori cytoplasmic actin gene (BmA3) has been used for ubiquitous expression of transgenes. So far, no strong promoter is available for ubiquitous expression in B. mori, excluding BmA3 promoter. To identify more powerful promoter than previously reported BmA3 promoter, we isolated 9 clones that show stronger signal compared to BmA3 by a dot blot hybridization. Among these 9 clones, we focused on one clone which has high amino acid homology (85%) with hypothetical protein 32 gene of Lonomia obliqua. This clone, named bHp32 (B. mori hypothetical protein 32) was ubiquitously expressed in all tissues and developmental stage of fifth instar B. mori larvae. As result of promoter assay using dual luciferase assay system, we found the highest transcription activity region (-1,200/+220) in the 5'-flanking region of bHp32 gene, which has 42-fold more intensive promoter activity than BmA3 promoter. Moreover, the bHp32 promoter was normally regulated in Bm5, Sf9, and S2 cells. Therefore, we suggest that bHp32 promoter may be used more powerful and effectively for transgene expression in various insects containing B. mori as a universal promoter.

Effects of Extrusion Pressure and Feed Ingredient Particle Size on Growth Performance in Olive Flounder Paralichthys olivaceus (익스트루전 압력과 사료원료의 입자크기를 조절한 배합사료가 치어기 넙치 (Paralichthys olivaceus)의 성장에 미치는 영향)

  • Cho, Jeong-Hyeon;Lee, Bong-Joo;Hur, Sang-Woo;Lee, Seunghyung;Kim, Kang-Woong;Lim, Sang-Gu;Son, Maeng-Hyun
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • 제52권3호
    • /
    • pp.247-255
    • /
    • 2019
  • This study was conducted to investigate the effects of extrusion pressure and particle size of feed ingredients on the growth performance and plasma hormone activity in juvenile olive flounder Paralichthys olivaceus. Experimental diets were prepared with extrusion pressure manipulated by screw speed [low pressure (LP), 885 rpm/min; high pressure (HP), 708 rpm/min] and different dietary particle sizes [specific surface area: small (SS), $169.9m^2/kg$; large (LS), $67.4m^2/kg$] in a two-level factorial design. Four experimental diets (LP+SS, LP+LS, HP+SS, and HP+LS) were randomly assigned to 12 tanks (3 replicates) stocked with 20 fish (initial weight, 57 g) per tank. After a 4-week feeding trial, the observable trends of the main effects of extrusion pressure and particle size on growth performance showed that LP and SS enhanced fish weight gain. The plasma insulin-like growth factor-I level was significantly higher in fish fed the LP+SS diet than in fish fed the HP+SS diet. These results indicate that manipulation of the physical qualities of feed through adjustment of extrusion pressure and feed ingredient particle size may influence the growth performance of juvenile olive flounder, which should be considered in feed manufacture.

Effect of Dietary Protein on the Changes of Lipoprotein Fractions in Carbon Tetrachloride-Treated Rats (식이성 단백질 함량에 따른 흰쥐에 사염화탄소 투여시 Lipoprotein 분획비의 변동)

  • 이혜자;윤종국;이상일
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • 제22권2호
    • /
    • pp.127-131
    • /
    • 1993
  • To evaluate an effect of dietary protein on lipoprotein profile serum of carbon tetrachloride-treated rats, carbon tetrachloride (50% in olive oil) was twice given at 0.1ml/100g body weight at intervals of 24hours to the male rats and then the degree of liver damage in carbon tetrachloride-treated animals fed a low protein diet was compared with that fed a high protein diet. The increasing rate of liver weight/body weight and the serum levels of alanine aminotransferase in carbon tetrachloride-treated rats to the control group were higher in rats fed high protein diet than those fed low protein diet. In the serum levels of lipid (total lipid, total cholesterol and triglyceride) remarkable differences were not found between low protein diet group and high protein diet group. But these serum lipids in carbon tetrachloride-treated rats were decreased and the decreasing rate of serum lipids to control group were higher in carbon tetrachloride-treated rats fed high protein diet than those fed low protein diet. Under the animal model as identified by the present data herein, serum pre $\beta$-lipoprotein and $\alpha$-lipoprotein fractions were decreased in carbon tetrachloride-treated rats, but the serum levels of $\beta$-lipoprotein were rather increased in the both group by the injection of carbon tetrachloride. Especially, the decreasing rate of $\alpha$-lipoprotein fraction was higher in $CCl_4$-treated rats fed a high protein diet than those fed a low protein diet to its control group and the increasing rate of serum $\beta$-lipoprotein fraction was also higher in $CCl_4$-treated rats fed high protein diet than those fed low protein diet.

  • PDF

A Study on the Stable 20 Watt High Power Amplifier for INMARSAT-C (INMARSAT-C형 위성통신단말기를 위한 안정한 20 Watt 고출력 증폭기에 관한 연구)

  • 전중성;김동일;배정철
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • 제3권2호
    • /
    • pp.281-290
    • /
    • 1999
  • This paper presents the development of a high power amplifier for a transmitter of INMARSAT-C operating at L-band(1626.5∼1646.5 MHz). To simplify the fabrication process, the whole system is designed of two parts composed of a driving amplifier and a high power amplifier The HP's AT-41486 is used for driving part and the SGS-THOMSON microelectronics' STM1645 is used the high power amplifier. The SSPA(Solid State Power Amplifier) was fabricated by the both circuits of RF and temperature compensation in aluminum housing. The realized SSPA has more than 36 dB for small signal within 20MHz bandwidth, and the voltage standing wave ratios(VSWR) of input and output Port are less than 1.5:1, respectively. The output Power of 42.2 dBm is achieved at the 1636.5 MHz. These results reveal a high power amplifier of 20 Watt which is the design target.

  • PDF