• 한국소음진동공학회논문집
• /
• 제16권8호
• /
• pp.886-892
• /
• 2006

Hot spot phenomenon is caused by non-uniform contact area between brake pad and disk frequent braking. Brake disk deformed by locally concentrated heat increases magnitude of frictional vibration. And this deformation can highly influence the judder vibration. In this experimental study, vibration and hot spot was measured in accordance with rotation of disk and pressure of master cylinder for finding the factors that causes hot spot phenomena. For comparing hot spot aspects with mode shapes of disk, mode shapes were measured by conducting modal test, and analyzed by using finite element analysis. Relation between hot spot phenomenon, and mode shape, pressure of master cylinder and rotation speed of disk respectively, was achieved by hot spot measurement and frequency analysis.

• 고신대학교 의과대학 학술지
• /
• 제33권2호
• /
• pp.141-149
• /
• 2018

Hot flush (hot flush or facial flush) is the most frequent symptom experienced by women of peri-menopausal age. It may appear on women or even men after surgery or chemotherapy. Hot flush is one of the biggest reason for women to undergo hormone replacement therapy (HRT). It also crucially affects various aspects of life quality such as occupation, social life, daily routine and health awareness. The most effective and fundamental remedy for hot flush is HRT. However, a few women is not responsive to HRT and investigation to elucidate other causes of hot flush is warranted, especially in elderly. The contraindications such as breast cancer mandates other modality of treatment. Variety of treatment for hot flush other than HRT will be discussed herein.

• 대한한방내과학회지
• /
• 제45권1호
• /
• pp.119-130
• /
• 2024

This case study reports on the effectiveness of Korean medicine treatment for menopausal hot flashes in stroke patients. During hospitalization, a female patient with medial medullary infarction was diagnosed with menopausal hot flashes and received treatment with traditional Korean medicine and acupuncture. The assessment was performed by monitoring daily habits to relieve hot flashes. The hot flash index, menopause rating scale (MRS), menopause-specific quality of life (MENQoL) questionnaire, and Kupperman index (KI) were also used. After 28 days of treatment, the hot flash index improved from 27 to 2, MRS improved from 11 to 2, MENQoL improved from 40 to 21, and KI improved from 22 to 6. Thus, this case suggests that Korean medicine treatment may be effective for menopausal hot flashes in stroke patients.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1994년도 추계 학술발표 강연 및 논문 개요집
• /
• pp.53-54
• /
• 1994

• 한국식품조리과학회지
• /
• 제24권6호
• /
• pp.882-890
• /
• 2008

The present study investigated the influence of different volumes of red hot pepper juice on the quality characteristics of fresh Pasta noodle. Supplementation with 0% (control), 2.5%, 5%, 7.5%, or 10% red hot pepper juice produced similar gelatinization characteristics of peak viscosity, temperature at peak viscosity, hot paste viscosity and numerical value of breakdown. However, increasing concentrations of red hot pepper juice produced progressively and significantly low cold paste viscosity and setback. The chromaticity of wet and cooked noodles was significantly lower in L value and significantly higher in +a and +b values with increasing volumes of red hot pepper juice. The texture of fresh noodles displayed no significant differences in hardness, adhesiveness and chewiness. The springiness and cohesiveness were lower and higher with the increase of added red hot pepper juice, respectively, but the differences just attained significance. For cooked noodles, adhesiveness, springiness, cohesiveness and chewiness tended to be higher with increasing volumes of red hot pepper juice, but again the differences just attained significance. Cooking characteristics of weight, volume, moisture absorptive power and turbidity decreased with increasing volumes of red hot pepper juice. Sensory characteristics of acceptability including appearance, color, flavor, taste, texture and overall-acceptability improved with increasing red hot pepper juice volume, in particular with 5% and 7.5%. Amylograph characteristics for initial paste temperature positively correlated with the texture characteristics for chewiness (p<0.05). Negatively correlated amylograph parameters included texture for springiness with for peak viscosity (p<0.01), texture for adhesiveness with hot paste viscosity (p<0.01) and breakdown with texture for adhesiveness, cohesiveness and chewiness (p<0.05).

• 설비공학논문집
• /
• 제28권9호
• /
• pp.355-360
• /
• 2016

Continuing to the modeling of heating load, this paper, as the second part of consecutive works, presents LS-SVM (least square support vector machine) based model of winter time apartment hot water supply load in a district heating system, so as to be used in prediction of heating energy usage. Similar, but more severely, to heating load, hot water supply load varies in highly nonlinear manner. Such nonlinearity makes analytical model of it hardly exist in the literatures. LS-SVM is known as a good modeling tool for the system, especially for the nonlinear system depended by many independent factors. We collect 26,208 data of hot water supply load over a 13-week period in winter time, from 12 heat exchangers in seven different apartments. Then part of the collected data were used to construct LS-SVM based model and the rest of those were used to test the formed model accuracy. In modeling, we first constructed the model of district heating system's hot water supply load, using the unit heating area's hot water supply load of seven apartments. Such model will be used to estimate the total hot water supply load of which the district heating system needs to provide. Then the individual apartment hot water supply load model is also formed, which can be used to predict and to control the energy consumption of the individual apartment. The results obtained show that the total hot water supply load, which will be provided by the district heating system in winter time, can be predicted within 10% in MAPE (mean absolute percentage error). Also the individual apartment models can predict the individual apartment energy consumption for hot water supply load within 10% ~ 20% in MAPE.

• 사물인터넷융복합논문지
• /
• 제8권5호
• /
• pp.77-83
• /
• 2022

낸드 플래시 메모리는 구조적으로 쓰기 전 지우기(Erase-Before-Write) 동작이 요구된다. 이것을 해결하기 위해서는 데이터 업데이트 동작이 빈번히 발생하는 페이지(Hot data page)를 구분하여 별도에 블록에 저장함으로 해결할 수 있으며 이러한 Hot data를 분류하는 기법을 핫 데이터 판단기법이라 한다. MHF(Multi Hash Function Framework)기법은 데이터 갱신요청의 빈도를 시스템 메모리에 기록하고 그 기록된 값이 일정 기준 이상일 때 해당 데이터 갱신요청을 Hot data로 판단한다. 하지만 데이터 갱신요청에 빈도만을 단순히 카운트하는 방법으로는 정확한 Hot data로 판단에 한계가 있다. 또한 데이터 갱신요청의 지속성을 판단 기준으로 하는 기법의 경우 갱신요청 사실을 시간 간격을 기준으로 순차적으로 기록한 뒤 Hot data로 판단하는 방법이다. 이러한 지속성을 기준으로 하는 방법의 경우 그 구현과 운용이 복잡한 단점이 있으며 갱신요청에 빈도를 고려하지 않는 경우 부정확하게 판단되는 문제가 있다. 본 논문은 데이터 갱신요청에 빈도와 지속성을 함께 고려한 경량화된 핫 데이터 판단기법을 제안한다.

• 소성∙가공
• /
• 제11권1호
• /
• pp.24-35
• /
• 2002

Recent trend and future prospect of flat rolling of steel has been summarized based on the earlier reports. Key technology in the plate rolling is to have ultra fine microstructure having high resistance against crack propagation during application. Heavy accelerated cooling facility and high power rolling mill will be helpful to develope the high toughness steel. Precise modeling of properly prediction based on deformation and transformation imposed on microstructure of steel during processing is highly anticipated. For the hot strip rolling process, new trend is lies on the production of ultra-thin gauged hot strip to substitute cold rolled strip. For the substitution of cold rolled strip into hot rolled strip widely, high formable property of hot strip is highly required. For the formabilit, the ferritic rolling of extra low carbon steel under high lubricated condition is essential. Recently introduced semi-continuous thin slab and rolling mill line is very plausible to develope those kinds of products easily In the view groin facility combination. New idea to modify the existing continuous hot strip mill line to produce the ultra thin-gauged hot strip in an economic way is suggested in this report.

• 대한전자공학회논문지SD
• /
• 제42권2호
• /
• pp.9-14
• /
• 2005

본 논문에서는bulk dynamic threshold voltage MOSFET(B-DTMOS)와 bulk MOSFET(B-MOS)에서 hot carrier 현상으로 인한 RF 성능 저하를 비교하였다. Normal 및 moderate 모드에서 B-DTMOS의 차단주파수 및 최소잡음지수의 열화가 B-MOS 소자 보다 심하지 않음을 알 수 있었다. 실험 견과로부터 hot carrier에 의한 RF 성능 저하가 DC 특성 열화 보다 심함을 알 수 있었다. 그리고 처음으로 hot carrier 현상으로 인한 B-DTMOS 소자의 RF 전력 특성 저하를 측정하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.1051-1055
• /
• 1997

Hot forging is widely used in the manufacturing of automotive component. The mechanical, thermal load and thermal softening which is happened by the high temperature die in hot forging. Tool life of hot forging decreases considerably due to the softening of the surface layer of a tool caused by a high thermal load and long contact time between the tool and workpieces. The service life of tools in hot forging process is to a large extent limited by wear, heat crack, plastic deformation. These are one of the main factors affecting die accuracy and tool life. It is desired to predict tool life by developing life prediction method by FE-simulation. Lots of researches have been done into the life prediction of cold forming die, and the results of those researches were trustworthy, but there have been little applications of hot forming die. That is because hot forming process has many factors influencing tool life, and there was not accurate in-process data. In this research, life prediction of hot forming die by wear analysis and plastic deformation has been carried out. To predict tool life, by experiment of tempering of die, tempering curve was obtained and hardness express a function of main tempering curve.