• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1900-1902
• /
• 2004

The degradation systems of non degradable waste water consist of the arc plasma torch, power supply, a feeder of liquid waste and reactors. Output of stable plasma torch, suitable air flux, microscopic atomizing state of waste water and long reaction section must be to degrade waste water more efficiently. In this paper, we are designed the stable power system, the microscopic atomizing state of waste water and the efficient reactors to satisfy various conditions. Non degradable wast water used in this work was $Na_2$EDTA of 1.0 mol. The concentration of $CO_2$ and EDTA was analyzed using GC (Gas Chromatography) and HPLC (High Performance Liquid Chromatography). In the result show that $CO_2$ concentration was about 96% and EDTA was degraded approximately 96%.

• Journal of Environmental Science International
• /
• v.20 no.8
• /
• pp.963-975
• /
• 2011

For this research, they were monitored $CO_2$ flux and environmental factors ($CO_2$ concentration, soil temperature, soil moisture, soil organic carbon, soil pH, soil Eh) in foreshore, paddy field and woods sites at the winter season (January 2009) and the summer season (September 2009). Seasonal and spatial variations for monitored data were analyzed, and linear regression functions of $CO_2$ flux as environmental factors were estimated. $CO_2$ fluxes averaged between surface and atmosphere monitored in foreshore and paddy field at the winter season were shown $-8\;mgCO_2m^{-2}hr^{-1}$ and $-25\;mgCO_2m^{-2}hr^{-1}$, respectively. $CO_2$ fluxes averaged between surface and atmosphere monitored in foreshore and paddy field at the summer season were shown $47\;mgCO_2m^{-2}hr^{-1}$ and $117\;mgCO_2m^{-2}hr^{-1}$, respectively. Thus, $CO_2$ was sunk from atmosphere to surface at the winter season and it was emitted from surface to atmosphere at the summer season. $CO_2$ fluxes in woods site were emitted $145\;mgCO_2m^{-2}hr^{-1}$ at the winter season and $279\;mgCO_2m^{-2}hr^{-1}$ at the summer season.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.3
• /
• pp.332-334
• /
• 1991

The reaction and coordination chemistry of chiral ferrocenylaminophosphines such as 2-(diphenylphosphino)-1-(N,N-dimethylaminoethyl) ferrocene (PPFA), and 1',2-bis(diphenylphosphino)-l-(N,N-dimethylaminoe thyl) ferrocene (BPPFA), with various iron carbonyls have been investigated. PPFA reacted with iron carbonyls, Fe$(CO)_5$, $Fe_2(CO)_9$, or $Fe_3(CO)_{12}$ to give an iron complex of the type (${\eta}^1$-PPFA-P)Fe$(CO)_4$ (1) as a single product regardless the choice of the iron carbonyls. The bisphosphine ligand BPPFA afforded two products (${\eta}^1$-BPPFA-P)Fe$(CO)_4$ (2) and (${\mu}$,${\eta}^1$-BPPFA-P,P)$Fe_2(CO)_8$ (3) in which BPPFA acts as a monodentate and a bridging ligand, respectively. In all cases coordination to the -Fe$(CO)_4$ moiety is made through the phosphine rather than the amino group and, in the case of 2, the coordination is made through the phosphine substituted at the $C_5H_4$ ring to reduce the steric congestion.

• Journal of radiological science and technology
• /
• v.17 no.1
• /
• pp.71-76
• /
• 1994

• Bulletin of the Korean Chemical Society
• /
• v.22 no.12
• /
• pp.1328-1332
• /
• 2001

The structure and electrochemical properties of the LixCoyNi1-yO2 (y=0.1, 0.3, 0.5, 0.7, 1.0) system synthesized by solid state reaction with various starting materials have been investigated to optimize the characteristics and synthetic conditions of the LixCoyNi1-yO2. The first discharge capacities of LixCoyNi1-yO2 are 60 mAh/g-180 mAh/g with synthetic conditions. Among them, the LixNi0.7Co0.3O2, which was prepared with LiOH, NiO, and Co3O4 at $850^{\circ}C$, had the best electrochemical properties. The first discharge capacity of the compound was 180 mAh/g.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1032-1033
• /
• 2015

차세대 친환경 송전기술로 세계적으로 주목되고 있는 HVDC는 유전체 손실이 없으며 안정도가 좋아 송전용량이 크고 송전효율이 높으며 선로의 절연계급이 낮으므로 경제적이고, 주파수가 다른 계통과 비동기 연계가 가능하여 고효율 녹색기술로 크게 각광받고 있다. 본 논문에서는 HVDC 송전선로의 핵심 절연물인 가공절연디바이스에 대한 직류 절연 설계 및 평가기술을 연구개발하고, 이를 바탕으로 핵심 절연물인 HVDC 500kV 급 폴리머애자를 개발한 시제품에 대한 공인시험기관의 개발시험을 통하여 성능평가를 완료한 다음, HVDC 500kV가 실제로 가압되는 실증선로에서 1년간의 실증시험을 수행하고, 실증을 완료한 시료에 대하여 성능확인을 통한 신뢰성 확보를 목표로 개발을 진행하여 성공적인 결과를 거둔 내용에 대하여 설명하고자 한다.

• Journal of the Korean Ceramic Society
• /
• v.40 no.6
• /
• pp.507-512
• /
• 2003

The LiN $i_{l-y}$ $Co_{y}$ $O_2$ samples were synthesized at 80$0^{\circ}C$ and 85$0^{\circ}C$, by the solid-state reaction method, from the various starting materials LiOH, L $i_2$C $O_3$, NiO, NiC $O_3$, $Co_3$ $O_4$, CoC $O_3$, and their electrochemical properties are investigated. The LiN $i_{l-y}$ $Co_{y}$ $O_2$ pre-pared from L $i_2$C $O_3$, NiO, and $Co_3$ $O_4$ exhibited the $\alpha$-NaFe $O_2$ structure of the rhombohedral system (space group; R3m). As the Co content increased, the lattice parameters a and c decreased. The reason is that the radius of Co ion is smaller than that of Ni ion. The increase in da shows that two-dimensional structure develops better as the Co content increases. The LiN $i_{0.7}$ $Co_{03}$. $O_2$［HOO(800,0.3)] synthesized at 80$0^{\circ}C$from LiOH, NiO, and $Co_3$ $O_4$ exhibited the largest first discharge capacity 162 mAh/g. The size of particles increases roughly as the valve of y increases. The samples with the larger particles have the larger first discharge capacities. The cycling performances of the samples with the first discharge capacity larger than 150 mAh/g were investigated. The LiN $i_{0.9}$ $Co_{0.1}$ $O_2$［COO(850,0.1)］ synthesized at 85$0^{\circ}C$ from L $i_2$C $O_3$, NiO, and $Co_3$ $O_4$ showed an excellent cycling performance. The sample with the larger first discharge capacity will be under the more severe lattice destruction, due to the expansion and contraction of the lattice during intercalation and deintercalation, than the sample with the smaller first discharge capacity. As the first discharge capacity increases, the capacity fading rate thus increases.increases.s.s.s.

• Korean Chemical Engineering Research
• /
• v.57 no.2
• /
• pp.253-258
• /
• 2019

Several materials are used to design the sorbents applied in a fast-fluidized bed process for post-combustion $CO_2$ capture. In this study, $K_2CO_3$-based dry sorbent (KMC) was prepared by using Micro-cell C (MCC), one of the materials used to design the sorbent, and then its $CO_2$ sorption and regeneration properties were evaluated. KMC sorbent showed a low $CO_2$ capture capacity of 21.6 mg $CO_2/g$ sorbent, which is about 22% of the theoretical value (95.4 mg $CO_2/g$ sorbent) even at 1 cycle, and showed a low $CO_2$ capture capacity of 13.7 mg $CO_2/g$ sorbent at 5 cycles. It was confirmed that the KMC sorbent was deactivated due to the formation of a $K_2Ca$ $(CO_3)_2$ phase, resulting from the reaction of the $K_2CO_3$ with the Ca component contained in the MCC. In order to solve the deactivation of sorbent, and KM8 sorbent was prepared by adding the process of calcining the MCC at $850^{\circ}C$. The KM8 sorbent showed a high $CO_2$ capture capacity of 95.2 mg $CO_2/g$ sorbent and excellent regeneration property. Thus, it was confirmed that the deactivation of the sorbent could be solved by adding the calcining step to remove the side reaction causing material.

• Progress in Medical Physics
• /
• v.10 no.3
• /
• pp.151-157
• /
• 1999

The GafChromic film was used for the dosimetry of a balloon angio catheter filled with the radioisotope HO-166 for endovascular irradiation. The balloon angio catheter was 2 cm long and 3 mm in diameter when inflated. The isotope, Ho-166, was produced by the neutron bombardment using the research reactor in Korea Atomic Energy Research Insititute. Co-60 teletherapy beam was used for making H-D curve for the Gaf-Chromic film. The film dosimetry was measured with a videodensitometer. The radial dose distribution indicated that the absorbed dose dropped to about 20% of the surface dose at the 1 mm away from the balloon surface and at 5 mm position the dose decreased to below 1% of the surface dose. The result also shows that with the specific activity of Ho-l66, 250 mCi/ml it takes 230 seconds to deliver 1200 cGy to the region where is 1mm away from the balloon surface. The concentric isodose curves were also presented. The Ho-166 is an another alternative for endovascualr irradiation to prevent restenosis after PTCA (Percutaneous Trans Coronary Angioplasty)

• Journal of the Korean Society of Combustion
• /
• v.13 no.1
• /
• pp.1-9
• /
• 2008

Emission characteristics of NOx and CO with heat loss under high efficiency combustion conditions of $CH_4$/Air prmixed flame were examined numerically using detailed-kinetic chemistry. The one-dimensional combustor length was fixed 5cm, and the equivalence ratio was varied from 0.75 to 0.95. To consider the effects of heat loss on NOx and CO formation, the radiative heat loss rate and combined heat loss rate of conductive and convective heat transfer are included. The following conclusions were drawn. In order to reduce the NOx and CO emission level simultaneously, the temperature of product gases must be reduced under 1,800K as soon as possible but kept over 1,300K during the residence time which is needed to converge CO to $CO_2$.