• Journal of Environmental Science International
• /
• v.29 no.11
• /
• pp.1025-1032
• /
• 2020

This work was performed to develop a dip injection wet scrubber (DIWS) system with chlorine dioxide as the oxidant. The exhaust pollutants from a lime kiln of paper-mill were introduced to the system. When NaClO₃ was used to oxidize NO into NO₂, the oxidation was unsatisfactory and the combination of HNO₃ or H₂SO₄ was required for 100% oxidation. ClO₂ is recommended to oxidize NO and SO₂ effectively. With the combination of 1^st stage of DIWS and ClO₂, 57.1% of NOx and 98% of SO₂ were effectively removed. In the case of 2^nd stage of DIWS and ClO₂, 93.5% of NOx and 99% of SO₂ were removed. The ClO₂+DIWS process was superior to the ClO₂+Scrubber process in terms of investment, running cost and NOx removal efficiency.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.9
• /
• pp.1001-1005
• /
• 2004

Rye-sensitized solar cell (DSSC) is a new class of solar cell, which consists of nanoporous TiO$_2$ electrode, dye-sensitizer, electrolyte, and counter electrode. Such cell is operated in sunlight via the principle of photosynthetic electrochemistry. In order to obtain the good dispersion of nano size TiO$_2$ particles In slurry, the pH of solvent, the sort and quantify of solvent additive and the quantity of surfactant were adjusted. As results, the lower the pH of solvent was the lower the viscosity of the slurry became. The addition of ethylene glycol and propylene glycol to dilute HNO$_3$ brought about the lowering of viscosity and the enhancement of stability in slurry. The addition of surfactant lowered the viscosity of slurry. It was possible to obtain the homogeneous and uniformly dispersed mesoporous TiO$_2$ film using the dilute HNO$_3$ solvent of pH 2 with the addition of ethylene glycol and neutral surfactant. DSSC was assembled with TiO$_2$ electrode and Pt electrode, and its photoelectric property was measured using the monochromatic wavelength in the rangee of 350∼700 nm.

• Advances in environmental research
• /
• v.12 no.1
• /
• pp.17-40
• /
• 2023

This article presents studies of the adsorption process in a continuous system of fluoride solutions at a concentration of 30 mg/L using a bone char packed in fixed-bed columns, as well as regeneration studies in the same system using HNO₃, HCl and NaOH at 0.01, 0.1 and 1 M. The Thomas Model, Artificial Neural Networks (ANNs), Numerical Integration and Mass Transfer Zone were used for the modeling of asyemmetrical breakthrough curves obtained from the fluoride adsorption on bone char. The maximum adsorption capacity of the breakthrough curves was estimated, and various design parameters of the columns were obtained for the different operating conditions. Results showed that an improvement in the modeling capabilities of the Thomas model can be obtained using ANNs. Moreover, ANNs are useful for determining reasonable and accurate design parameters of packed-bed adsorption columns. This modeling approach can be useful for the process system engineering of dynamic adsorption systems involved in the field of water treatment and purification. It is important to highlight that the obtained results indicate that, when using HCl or HNO₃ at a concentration of 0.1 M, a large number of adsorption-desorption cycles are obtained and, therefore, the highest values of adsorption capacity, which leads to a reduction in operation costs.

• Economic and Environmental Geology
• /
• v.53 no.4
• /
• pp.337-346
• /
• 2020

This study was carried out to evaluate the applicability of the soil washing process to remediation mercury-contaminated mine tailing or solid material (soil and sediments etc.) around abandoned mines. First, the physicochemical characteristics of mine tailing were analyzed through particle size analysis and sequential extraction. Secondly, laboratory scale washing experiments were performed using hydrochloric acid, nitric acid, potassium iodide and sodium thiosulfate. As a results of particle size analysis, mine tailing particle were concentrated below 40 mesh and the particle size below 200 mesh was the most analyzed. As a result of sequential extraction, elemental mercury fraction was analyzed as the highest with 69.12%, with strongly bound fraction 15.25% and residual and HgS fractions 11.97%, respectively. Laboratory scale washing experiments showed low applicability for nitric acid and sodium thiosulfate solutions. In case of hydrochloric acid solution, it was analyzed that mercury removal was possible at particle size of 200 mesh or more. Therefore, it is considered to be performed together with the physical sorting process. Potassium iodide solution was analyzed to have high washing efficiency at all concentrations and particle sizes. In particular, the mercury removal efficiency is high in the micro particles, and thus the applicability of the washing technology is the highest.

• Journal of the Korean Ceramic Society
• /
• v.43 no.1 s.284
• /
• pp.33-37
• /
• 2006

For producing the fine ribs structure of plasma display panel, the metal ions of barrier materials during the etching process should be understood on the etching mechanism with etching conditions. Etching was done on bulk glasses of the $BaO_B_2O_3-ZnO$ system with $HNO_3$ solution at $40^{\circ}C$. The surface structure of glasses and ion dissolution were analyzed by ICP (Inductive Coupled Plasma measurement). The structure and surface of the etched bulk glass were investigated by using scanning electron microscopy and nanoindenter. As a result, Ba (3-35 ppm/min) and Zn (2-27 ppm/min) ions as major components were leached in the solution and the leached layers were found to be phosphor-rich surface layers. A decrease of the bridge oxygen and relative increase of non bridge oxygen in the etched glass were found by X-ray photoelectron spectroscopy.

• Advances in concrete construction
• /
• v.10 no.3
• /
• pp.221-236
• /
• 2020

To reduce the CO₂ emissions associated with the manufacture of portland cement (PC), an efficient alternative like an alkali-activated binder (AAB) is the requirement of the industry. To promote the use of AAB in construction activities, a practically implementable mix proportion is required. Owing to the several raw ingredients of AAB concrete and their associated uncertainties, partial replacement of PC by AAB may be adopted instead of complete replacement as per industrial requirements. Hence, the present study aims to determine an optimal proportion for partial replacement of PC with AAB and recommend a technique for it based on site conditions. Three modes of partial replacement are followed: combining all the dry ingredients for AAB and PC followed by the addition of the requisite liquids (PAM); combining the PC and the AAB concrete in two horizontal layers (PAH); and two vertical layers (PAV). 28-day old specimens are exposed to 10% v/v solutions of HCl, H₂SO₄, and HNO₃ to evaluate changes in mechanical, physical, and microstructural characteristics through compressive strength, corrosion depth, and microscopy. Based on deterioration in strength and integrity, PAH or PAV can be adopted in absence of acid attack, whereas PAM is recommended in presence of acid attack.

• Korean Journal of Materials Research
• /
• v.15 no.2
• /
• pp.112-114
• /
• 2005

Dispersion stability of the $Sm_xCe_{1-x}O_{2-2/x}$ nanoparticles, which was produced by hydrothermal process, was studied in aqueous suspension using ESA (Eletrokinetic Sonic Amplitude). The average particle size of the synthesized $Sm_xCe_{1-x}O_{2-2/x}$ at nanoparticles was about $5{\pm}2nm$. The dispersion and rheological behavior of the $Sm_xCe_{1-x}O_{2-2/x}$ nanoparticles aqueous suspension was investigated using $NH_4OH\;and\;HNO_3$ as a disperse agent. The colloidal stability of aqueous suspensions with $Sm_xCe_{1-x}O_{2-2/x}$ nanoparticles at different pH values has been investigated by means of zeta potential, average particle size, and the distribution of synthesized $Sm_xCe_{1-x}O_{2-2/x}$ nanoparticles. The isoelectric point of the $Sm_xCe_{1-x}O_{2-2/x}$ nanoparticles was at pH around 11 and the value of zeta potential was at its maximum near pH 6.5.

• Journal of Industrial Technology
• /
• v.21 no.A
• /
• pp.279-284
• /
• 2001

In this study, we analyzed the $NO_X$ removal effiency by the low temperature plasma process and investigated the effect of several process variables. Most of NO is converted into $NO_2$ and, later, into $HNO_3$ which reacts with $NH_3$ to form $NH_4NO_3$ particles. As the frequency of appling voltage increases, as the applied voltage increases or as the residential time increases, removal efficiency of the NO supplied initially increase. The removal efficiency of $NO_X$ also increases with the increase of $NH_3$ supplied.

• Applied Chemistry for Engineering
• /
• v.10 no.7
• /
• pp.1092-1095
• /
• 1999

The well-known mixed-acid process for the aromatic nitration requires subsequent separation of spent acid, mainly dilute sulfuric acid. A novel nitration process using $HNO_3-NO_2-O_3$ was tested in a small pilot scale with 3 mol of p-nitrotoluene. Nitrogen dioxide(14.3 mol) was added three times in parts into the solution of p-nitrotoluene and $HNO_3$(6 mol) in dichloroethane. The nitration proceeded to more than 97% conversion within 5.5 h using 0.871 mol/h of ozone. As a clean process of aromatic nitration, this method is expected to replace the present process which causes the environmental problems.

• Analytical Science and Technology
• /
• v.27 no.6
• /
• pp.352-356
• /
• 2014

Various studies have been done to improve the properties of the steel by adding boron to the steel. Some studies have reported on the analysis of the boron in steel by AAS (atomic absorption spectrometry), ICP-OES(inductively coupled plasma-optical emission spectrometry), ICP-MS (inductively coupled plasma/mass spectrometry). The volatile loss of boron of steel in sample digestion and the separation procedure for avoiding matrix effect by high concentration of iron are difficulties for determination of boron in steel. The method to determine boron in steel by ICP-MS was developed without volatilization of boron in sample digestion step with $HNO_3-NH_4HF_2$ digestion method, and the additional separation process for avoiding matrix effect. Complete decomposition of steel with $HNO_3-NH_4HF_2$ digestion method, and boron determination by ICP-MS in the matrix of high concentration of iron were possible. Quantitative recoveries of boron in certified standard steel by new method in this study were 103 to 111%, and the relative standard deviation is less than 5%. The method detection limit was $1.17{\mu}g/g$.