• Geophysics and Geophysical Exploration
• /
• v.14 no.1
• /
• pp.1-6
• /
• 2011

As a check on calibration and drift in each discrete sub-system of a commercial frequency-domain airborne electromagnetic system, we aim to use causality constraints alone to predict in-phase from wide-band quadrature data. There are several possible applications of the prediction of in-phase response from quadrature data including: (1) quality control on base level drift, calibration and phase checks; (2) prediction and validation of noise levels in in-phase from quadrature measurements and vice versa and in future; and (3) interpolation and extrapolation of sparsely sampled data enforcing causality and better frequency-domain-time-domain transformations. In practice, using tests on both synthetic and measured Resolve helicopter-borne electromagnetic frequency domain data, in-phase data points could be predicted using a scaled Hilbert transform with a standard deviation between 40 and 80 ppm. However, relative differences between base levels between flight could be resolved to better than 1 ppm, which allows an independent quality control check on the accuracy of drift corrections.

• Fashion & Textile Research Journal
• /
• v.20 no.2
• /
• pp.128-142
• /
• 2018

This study explores newborn clothing with regard to clothing type, construction, textiles, design, size, and label placement. Related consumer complaints are also analyzed. Analysis of 50 newborn clothing items revealed six types of newborn clothing: baenaet jeogori, baenaet gown, bodysuit, one-piece, shirt and pants set, and pants. The baenaet jeogori was the most common type, and the most commonly used fasteners were ties and snaps. The following characteristics were commonly observed: front opening, long raglan sleeves, mitten cuffs, cotton fabric, white/ivory color, animal print, contrast hem, $appliqu{\acute{e}}$, and size 60. In-depth interviews of 12 mothers with children under 24 months revealed that the baenaet jeogori was the most unsatisfactory type; the shirt and pants set and bodysuit were preferred. Interviewees were dissatisfied with types of openings, expressing a preference for snaps and complaining about ties, too many snaps, metal snaps, and shoulder openings. Overly wide or narrow sleeves resulted in improper fit, and long sleeves made it difficult to dress the baby. Interviewees required diverse sleeve length options. They were dissatisfied with heavy fabric for hot and warm seasons, and with labels attached inside clothing or outside near the neckline. Mothers with particularly small or big babies complained about limited sizes. To improve current newborn clothing, additional items such as shirt and pants sets or individual pants, front opening clothing with few snaps, proper sleeve fit with diverse length options, lightweight fabric for hot and warm seasons, label placement that avoids skin irritation, and size segmentation are recommended.

• The Journal of Internal Korean Medicine
• /
• v.35 no.1
• /
• pp.106-110
• /
• 2014

Objectives : To report a case of the treatment of primary hypertension by Oryung-san (五苓散: Wulingsan in Chinese, Goreisan in Japanese) monotherapy. Methods : The blood pressure (BP) fluctuation was checked of a woman who had sudden BP elevation without a history of hypertension treatment. There were no specific history of disease and results for the laboratory examination and image diagnosis including MRI. The woman was diagnosed with primary hypertension and she was given supple of Oryung-san extract (Hanpoong Pharm Co.) 3 g, three times a day for three months. The BP has been checked with digital sphygmomanometer (HEM-7111, Omron Japan) in brachial artery at home. Results and Conclusions : The patient had had stable BP since three weeks after Oryung-san treatment was initiated. There were no subjective symptoms, then Oryung-san medication also had quit after three months treatments. This shows some possibility to control hypertension using Oryung-san, which resembles thiazide that acts on the distal convoluted tubule and inhibit sodium-chloride reabsorption. For further evaluation of the effectiveness, well-designed randomized controlled trials should be undertaken.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.2 no.1
• /
• pp.157-166
• /
• 1978

The purpose of this study was; (1) to examine ready-to-wear dresses to find the characteristics of labels and construction which existed at three different price levels and (2) to make the gathered information available to consumers, designers, manufacturers and the people who are concerned with ready-to-wear garments. A check sheet was made listing a wide variety of features which could cause garments to be different. For the statistical analysis. 87 dresses were used out of 116 dresses examined. Observation was made at the stores in Myung Dong, Suh-Dae Moon and No Ryang Jin in Seoul from February 16, 1978 to March 3, 1978. The findings are; 1. The average prices of high, medium and low priced levels were ${\\}54,728$, ${\\}41,448$ and ${\\}7,225$. The average price discrepancy between high and medium priced levels was ${\\}13,000$ and ${\\}34,194$ between medium and low priced levels. 2. Most of the dresses examined had labels in all three priced levels. The most informative labels were found on medium priced dresses and then high. The low priced dresses had no information which would be of help to the consumer in regard to care, size and Jiber content. 3. Most of the dresses examined were cut on lengthwise grain. The stitching of medium and high priced levels were satisfactory. The chief way of fastening threads at the end of stitching was by backtracking. $28\%$ of the low priced levels was found unappropriate in stitching number because it was too large to the fabric. Many dresses in low priced levels were not pressed well. The average hem width of low priced dresses were less than 3cm, the high 3-4cm and the medium 4-5cm. Hemming was done mostly by hand in high and medium and by machine in low priced dresses. The medium priced dresses used more linings than low and high priced dresses.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.2
• /
• pp.257-266
• /
• 1998

This study was conducted to examine the changes of the mechanical properties of the position in jean slacks during the wear, previously used for the wearing test, which were subjected to repeated tensile-shearing deformation using a simulated fatigue tester has been investigated and compared, by calculating both mechanical properties and hand value(HV) of these fabrics with KES-F system and the by obtaining the THV through these calculated properties. The results are as follows. 1. The fatigue phenomenon of mechanical properties was the LT, 2H B, 2HBS, MMD, SMD, RC values increased, elasticity values of tensile, bending and shearing properties, such as B, G and compression properties LC, WC were reduced. It was shown, then, that those fabrics lost their elasticity and became flexible and soft with the increase of fatigue. 2. The hand value and THV; except anterior knee from all part of KOSHI, NUMERI, FUKURAMI was decreased. 3. The fatigue phenomenon of hand value was different on the position of clothing; on the position of hip, rate of B, G smaller than other parts and KOSHI was decreased, on the part of anterior thigh was FUKURAMI was increased, on the anterior knee RC, NUMERI, THV was increased, on the posterior knee was 2HB, 2HG, 2HGS showed increasedgreater than any other part and on the hem of back, MMD was increased, but NUMERI was decreased. 4. The changing process of mechanical properties in the simulation testing by the fatigue tester has similar tendency to that of the wearing tester. It is concluded that this testing method is useful to predict the fatigue phenomena of fabrics caused by wearing.

• International Journal of Automotive Technology
• /
• v.8 no.6
• /
• pp.731-744
• /
• 2007

A method for dynamic analysis and design calculation of a Powertrain Mounting System(PMS) including Hydraulic Engine Mounts(HEM) is developed with the aim of controlling powertrain motion and reducing low-frequency vibration in pitch and bounce modes. Here the pitch mode of the powertrain is defined as the mode rotating around the crankshaft of an engine for a transversely mounted powertrain. The powertrain is modeled as a rigid body connected to rigid ground by rubber mounts and/or HEMs. A mount is simplified as a three-dimensional spring with damping elements in its Local Coordinate System(LCS). The relation between force and displacement of each mount in its LCS is usually nonlinear and is simplified as piecewise linear in five ranges in this paper. An equation for estimating displacements of the powertrain center of gravity(C.G.) under static or quasi-static load is developed using Newton's second law, and an iterative algorithm is presented to calculate the displacements. Also an equation for analyzing the dynamic response of the powertrain under ground and engine shake excitations is derived using Newton's second law. Formulae for calculating reaction forces and displacements at each mount are presented. A generic PMS with four rubber mounts or two rubber mounts and two HEMs are used to validate the dynamic analysis and design calculation methods. Calculated displacements of the powertrain C.G. under static or quasi-static loads show that a powertrain motion can meet the displacement limits by properly selecting the stiffness and coordinates of the tuning points of each mount in its LCS using the calculation methods developed in this paper. Simulation results of the dynamic responses of a powertrain C.G. and the reaction forces at mounts demonstrate that resonance peaks can be reduced effectively with HEMs designed on the basis of the proposed methods.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.3
• /
• pp.500-506
• /
• 2017

To investigate the potential applications of bacterial heme, aminolevulinic acid synthase (HemA) was expressed in a Corynebacterium glutamicum HA strain that had been adaptively evolved against oxidative stress. The red pigment from the constructed strain was extracted and it exhibited the typical heme absorbance at 408 nm from the spectrum. To investigate the potential of this strain as an iron additive for swine, a prototype feed additive was manufactured in pilot scale by culturing the strain in a 5 ton fermenter followed by spray-drying the biomass with flour as an excipient (biomass: flour = 1:10 (w/w)). The 10% prototype additive along with regular feed was supplied to a pig, resulting in a 1.1 kg greater increase in weight gain with no diarrhea in 3 weeks as compared with that in a control pig that was fed an additive containing only flour. To verify if C. glutamicum-synthesized heme is a potential electron carrier, lactic acid bacteria were cultured under aerobic conditions with the extracted heme. The biomasses of the aerobically grown Lactococcus lactis, Lactobacillus rhamosus, and Lactobacillus casei were 97%, 15%, and 4% greater, respectively, than those under fermentative growth conditions. As a potential preservative, cultures of the four strains of lactic acid bacteria were stored at $4^{\circ}C$ with the extracted heme and living lactic acid bacterial cells were counted. There were more L. lactis and L. plantarum live cells when stored with heme, whereas L. rhamosus and L. casei showed no significant differences in live-cell numbers. The potential uses of the heme from C. glutamicum are further discussed.

• The Journal of Korean Society for Radiation Therapy
• /
• v.14 no.1
• /
• pp.89-94
• /
• 2002

During radiation therapy with electron beam to eyelid, we must keep the minimal dose on eyeball as possible. especially in the treatment of Sebaceous gland carcinoma, Squamouse cell ca., and basal cell ca. of eyelid and low grade MALToma etc. But if radiation field covered the upper & lower eyelid, it makes a cataract on lens of treated eye, in late complications. Now we reports the advantages of Tungsten eyeball shielding block compare to previously used lead block. with BOLX-I material, we made a eyeball model and measured the absorbed dose of 6MeV & 9MeV electron hem at 6 point of eyeball model with TLD chip. And compare the absorbed dose to previously lead block and other types of Tungsten eyeball shielding block.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.2
• /
• pp.281-291
• /
• 2002

This paper describes the minimum cost design of prestressed reinforced concrete (PRC) hem with rectangular section. The cost of construction as objective function which includes the costs of concrete, prestressing steel, non prestressing steel, and formwork is minimized. The design constraints include limits on the minimum deflection, flexural and shear strengths, in addition to ductility requirements, and upper-Lower bounds on design variables as stipulated by the specification. The optimization is carried out using the methods based on discretized continuum-type optimality criteria(DCOC). Based on Kuhn-Tucker necessary conditions, the optimality criteria are explicitly derived in terms of the design variables - effective depth, eccentricity of prestressing steel and non prestressing steel ratio. The prestressing profile is prescribed by parabolic functions. In this paper the effective depth is considered to be freely-varying and one uniform for the entire multispan beam respectively. Also the maximum eccentricity of prestressing force is considered in every span. In order to show the applicability and efficiency of the derived algorithm, several numerical examples of PRC continuous beams are solved.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.9
• /
• pp.947-956
• /
• 2008

In this paper, miniaturized conically stepped COBRA is proposed. In order to prevent electrical breakdown, COBRA, which consists of hem and lens, has to get bigger if it is designed with conventional method. Because of the phase error increase, shortening the length of the antenna without changing the aperture size leads to the reduction of the antenna gain. To avoid this, the phase error at the aperture is compensated by transforming the COBRA lens into conically stepped form. The simulations result shows that the proposed antenna has higher gain than the conventional COBRA in spite of the size reduction from 1,300 mm to 600 mm. The fabricated and measured COBRA has the gain of 26.2 dBi.