• 한국지반공학회지:지반
• /
• 제13권6호
• /
• pp.5-12
• /
• 1997

연약지반 개량을 위한 프리로딩 공법에서 침하 애측은 시공관리상 매우 중요한 요소이다. 지반의 비균질성, 지반 물성치 조사의 한계 등의 이유로 설계시에 침하속도 및 침하량을 실제 발생치와 근접하게 예측하기는 매우 어렵다. 이러한 문제점 때문에 쌍곡선법,아사오카법 등 초기 침하계측을 이용한 장래 침하 추정 법들이 침하 예측 기법으로 활발하게 이용되고 있으나, 예측 시점에서 추정된 장래 침하량의 신뢰성에 대한 평가 방법엔 대하여서는 제시된 바가 없다. 본 연구는 사례연구를 통하여 쌍곡선법으로 예측된 장래침하량들과 실 침하량들을 비교하구 초기 계측 기간에 따른 장래 침하량 예측의 신뢰성에 관한 분석을 통하여. 쌍곡선법을 이용한 장래 침하량 추정의 신뢰성 평가 방법을 제시하고자 한다.

• 대한예방한의학회지
• /
• 제20권1호
• /
• pp.125-144
• /
• 2016

Objectives : About 13% of the medicines used by traditional korean medicines(TKM), are called animal medicines and are derived from non-herbal sources such as animals and insects. However, the clinical use of these preparations from animal medicines is often based on tradition and belief, rather than on evidence of toxicity and efficacy. As a result, animal medicines containing toxin have caused serious problems from injecting patients with venom. Here, various venoms frequently used as TKM were reviewed in terms of their instinct toxity and tried to estimate their safety classification. Methods : The estimation of safety classification was based on human equivalent dose(HED)-based MOS (margin of safety) and clinical dose applied for patients. Results and Conclusions : Except that of snake venom due to no clinical dose, they were evaluated as class 3 for bee venom, class 4 for cantharidin, toxin from blister beetle, and class 1 for venom from scolopendrid. In conclusion, animal medicines showed a wide range of safety classification from class 1 to class 4. This wide range is estimated to result from extremely limited applications of each venom for patients because of their strong toxicity. However, it should be cautious for application in clinics since animal medicines can produce anaphylactic reactions particularly after veinous administration even with a tiny amount of venom.

• 천문학회보
• /
• 제35권2호
• /
• pp.45.2-45.2
• /
• 2010

We analyzed onset times of the largest six solar proton events during 1997-2006 of solar cycle 23, as observed at 1AU by two satellites of GOES/SEM (Geostationary Operational Environmental Satellites/the Space Environment Monitor) and SOHO/ERNE (Solar and Heliospheric Observatory/the Energetic and Relativistic Nuclei and Electron). We adopted the time shifted method suggested by Leon Kocharov and determined the path length by Sam Krucker's fitting method. We found some problems of those methods and tried to improve those. In this presentation, we will give details of the energy spectra of the 6 SPE events from the ERNE/HED, and onset time comparison among the SPE, flare, type II burst, and CME.

• 한국표면공학회지
• /
• 제30권1호
• /
• pp.33-43
• /
• 1997

The effects of process parameters substrate such as substrate current and substrate temperature on the corrosion resistance of ion plated TiN film were investigated. TiN fims were deposited on speed steel on which Ti or Ni hed been previously evaporated. Dense TiN films could be obtained under higher substrate current(1A) and substrate temperature($500^{\circ}C$), whereas TiN films deposited with lower substances current(0.5A) and substrate temperature($300^{\circ}C$) showed porous structure. The corrosion resistances of high speed steel was considerably increased when dense TiN films had been formed on it. The effect of Ti and Ni interlayer on the increase of the corrosion resistance was also significant with dense TiN films, while there was little effect of interlayer on the corrosion resistance when TiN films were porous. the effect of interlayer on the corrosion resistance was more outstanding with Ti then with Ni, because Ti reacts more easily with oxygen to form an oxide layer, and it also shows higher resistance against chlorine containing corrosion media.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권10호
• /
• pp.929-938
• /
• 2020

This study analyzes the effect of quality of services provided to the students' in relation to their satisfaction and loyalty. Respondents in this study were seventh semester students of Universitas Muslim Nusantara Al-Washliyah, the total number of students was 312. Data analysis techniques in this study used was SEM (Structural Equation Modeling) using the SmartPLS program. The results showed that students' satisfaction significantly mediated the correlation between academics and students' loyalty, between non-academic and students' loyalty, between reputation and students' loyalty, and between campus access and students' loyalty; on the other hand, students' satisfaction was not significant in mediating the correlation between program issues and students' loyalty. The findings suggest that it is necessary to improve the quality of lecturers to improve students' academic abilities and communication skills. As far as non-academic aspects are concerned, conducting training and development efforts and increasing awareness programs for administrative staff is important. For the reputation aspect, to carry out several marketing campaigns which predict to have an effect upon students in building positive perceptions of campus has to be executed as well. Meanwhile for access aspect, it should be made certain that every student can have direct access to staff employees, and it is necessary to improve dimensions which can increase students' satisfaction so that students are convinced of their choice of campus and then they are likely to recommend their chosen university and spread positive things about their institutions.

• 한국표면공학회지
• /
• 제31권5호
• /
• pp.251-260
• /
• 1998

Stainless Steel is being used widely for various purposes due to its good corrosion resistance. There have been many researches to produce colored stainless steel by several methods such as anodizing and ion-plating. In this experiment, we $Ti_XN$(C,O) on the films SUS304, aluminium, and glass substrates with DC magentron sputterinng system made by Leybold Hereus, and strdied the structur, corrsion and pit characture of the TiXN observed by TeM image was black and whink and white columnar hed a very fine(200$\AA$) dense sturcture,and the diffraction resistance at the $3{\times}10_6A/\textrm{cm}^2$ and $10_{10}\times{cm}^2$current density were obtained in the under-stoichiometry $Ti_xN$ compound of Ar/$N_2$(Ar:$N_2$=100:6, titanium-rich compound) and the over-stoichiometry compound of Ar/$N_2$((Ar:$N_2$=60:15) respectively. When the thiness was over 1.64$\mu\textrm{m}$, good pit resistance could be obtained and its improvement was especially affected by perfect surfaceface. Typical TiN anodic polarzation curves of very unstable corrosion were observed by $Ti_xN$ film on the glass and perfect film of 3.28$\mu\textrm{m}$ thickness.

• 대한한의학회지
• /
• 제35권1호
• /
• pp.114-123
• /
• 2014

Objectives: Evidence-based medicine(EBM) advocates the use of up-to-date "best" scientific evidence from health care research as the basis for making medical decisions. EBM also has been applied to traditional Korean medicine(TKM), especially in the field of safety. Recently, the standard prescription for TKM by Korea Institute of Oriental Medicine was published based on toxic index from various toxicity tests. However, there are some limitations when the results from the study based on EBM are applied in clinics. To overcome these imitations, the term "evidence-based practical medicine" was developed and defined as clinically applicable results from the study based on EBM. And safety classification for TKM was suggested as an example of evidence-based practical medicine. Methods: For safety classification for TKM, the data for $LD_{50}$(50% lethal dose), which was transformed to theoretical $LD_1$(1% lethal dose), was analyzed as one of tools for EMB study and divided by maximum dose used in clinics. Results and Conclusions: As a result, human equivalent dose(HED)-based MOS(margin of safety) for korean traditional medicine was calculated and used for safety classification with 5 categories. These categories would be helpful for oriental medicine clinicians to decide the increase and decrease of dosage according to various factors such as patient's sensitivity, potential toxicity of herbal medicines, clinician's experience for better cure. Thus, this safety classification provides some evidences enough that evidence-based practical medicine should be not the same with EBM and defined differently from EBM.

• 대한두경부종양학회지
• /
• 제12권2호
• /
• pp.188-192
• /
• 1996

점막형 악성흑색종 10례에 대한 임상분석 결과 비강에서 가장 호발하였고 증상은 비폐색이 가장 많았다. 치료 성적은 수술을 우선적으로 선택한 후 방사선요법을 시행한 경우군에서 평균생존기간이 20.8개월이었고 방사선치료를 우선적으로 선택한 경우군에서는 14.7개월로, 접막형 악성흑색종의 경우 광범위 절제술 후 방사선요법을 시행하는 것이 도움이 될 것으로 생각되나 윈격전이 6례를 포함한 8례의 환자에서 재발이 있어 예후가 극히 불량한 암종으로 생각된다.

• 천문학회보
• /
• 제35권1호
• /
• pp.33.2-33.2
• /
• 2010

We have investigated a relationship among the solar proton events (SPEs), coronal mass ejections (CMEs) and solar flares during the solar cycle 23 (1997-2006). Using 63 SPE dataset, we found that SPE rise time, duration time, and decrease times depend on CME speed and SPE peak intensity depends on the CME earthward direction parameter as well as CME speed and x-ray flare intensity. While inspecting the relation between SPE peak intensity and the CME earthward direction parameter, we found that there are two groups: first group consists of large 6 SPEs (> 10,000 pfu at >10 MeV proton channel of GOES satellite) and shows a very good correlation (cc=0.65) between SPE peak intensity and CME earthward direction parameter. The second group has a relatively weak SPE peak intensity and shows poor correlation between SPE peak intensity and the CME earthward direction parameter (cc=0.01). By investigating characteristics of 6 SPEs in the first group, we found that there are special common conditions of the extremely large proton events (group 1); (1) all the SPEs are associated with very fast halo CME (>1400km/s), (2) they are almost located at disk region, (3) they also accompany large flare (>M7), (4) all they are preceded by another wide CMEs, and (5) they all show helmet streamer nearby the main CME. In this presentation, we will give details of the energy spectra of the 6 SPE events from the ERNE/HED aboard the Solar and Heliospheric Observatory (SOHO), and onset time comparison among the SPE, flare, type II burst, and CME.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권6호
• /
• pp.827-835
• /
• 1998

The effects of recirculated exhaust gas on the wear of cylinder liner piston and piston rings have been investigated by the experiment with a two-cylinder four cycle indirect injection diesel engine operating at 75% load and 1600 rpm speed For the purpose of comparison between the rates of two cylinders with and without EGR the recirculated exhaust gas is sucked into one of two cylinders after the soot among exhaust emissions is removed by an intntionally designed cylinder-type scrubber equipped with 6 water injectors(A water injector has 144 nozzles of 1.0 mm diame-ter) while only the fresh air into another cylinder. These experiments are carried out on the fuel injection at a fixed $15.3^{\circ}$ BTDC timing. It is found that firstly the mean wear amount of cylinder liner with EGR is more increased in the measurement positions of the second half than of the first half and the mean wear amount without EGR is almost uniform regardless of measurement posi-tions secondly the wear rates of the first and second piston ring(compression ring)thickness with EGR are more than twice but the wear rate of oil ring thickness without EGR is more increased than that with EGR and finally the wear rate of piston skirt with EGR is a little bit increased but the piston hed diameter is rather increased owing to soot adhesion and corrosion wear and espe-cially larger with EGR.