• Biotechnology and Bioprocess Engineering:BBE
• /
• v.9 no.3
• /
• pp.156-165
• /
• 2004

Concentrations of substrates, glucose, and ammionia in biological processes have been on-line monitored by using glucose-flow injection (FIA) and ammonia-FIA systems. Based on the on-line monitored data the concentrations of substrates have been controlled by an on-off controller, a PID controller, and a neural network (NN) based controller. A simulation program has been developed to test the control quality of each controller and to estimate the control parameters. The on-off controller often produced high oscillations at the set point due to its low robustness. The control quality of a PID controller could have been improved by a high analysis frequency and by a short residence time of sample in a FIA system. A NN-based controller with 3 layers has been developed, and a 3(input)-2(hidden)-1(output) network structure has been found to be optimal for the NN-based controller. The performance of the three controllers has been tested in a simulated process as well as in a cultivation process of Saccharomyces cerevisiae, and the performance has also been compared to simulation results. The NN-based controller with the 3-2-1 network structure was robust and stable against some disturbances, such as a sudden injection of distilled water into a biological process.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.4
• /
• pp.1547-1551
• /
• 2011

The EFI small engine has been redesigned and manufactured based on a commercial small engine with a carburettor. Performance development of the EFI small engine has been conducted to optimize the operating conditions. Maximum torque and power were 12.56Ps and 25.4Nm, respectively, that were equivalent with carburettor type engine. Brake specific fuel consumption of the EFI small engine has been improved 17% on average compared with that of base small engine with a carburettor. By conducting KG2-6 mode test,HC+NOx was 7.46g/kWh that satisfied EPA Phase 3 regulation. THC has been reduced 41% on average, but NOx has been increased 3.5 times on average due to the improved thermal efficiency.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.3
• /
• pp.1267-1274
• /
• 2021

This study aims to analyze the effect of corporate communication and service quality on loyalty mediating satisfaction. The population of this study is 384 Islamic bank customers in North Sumatra. This research is quantitative research using the survey method. The number of research samples was 384 customers. Characteristics of this research sample were (1) Savings customers who actively carried out transactions in Islamic banks (2) Savings customers who had used bank services for at least 1 year (3) Savings customers who used services directly and individually. The data analysis technique used in this study was the Partial Least Squares-Structural Equation Model (SEM-PLS) analysis technique, using Warp-PLS 3.0 software. This study investigates the largest Islamic banks in North Sumatra, namely Bank Syariah Mandiri, Bank BNI Syariah, and Bank BRI Syariah. The results show that company communication has a positive and significant effect on satisfaction, service quality has a positive and significant effect on satisfaction, company communication has a positive and significant effect on loyalty, service quality has a positive and significant effect on loyalty, satisfaction has a positive and significant effect on loyalty. There is also a significant effect of satisfaction on the relationship between company communication and loyalty, and the relationship between service quality and loyalty. This study contributes to Islamic banking to increase customer loyalty.

• Journal of the Chungcheong Mathematical Society
• /
• v.25 no.3
• /
• pp.553-562
• /
• 2012

It has been proved that the union of two linear star-configurations in $\mathbb{P}^2$ of type $t{\times}s$ for $3{\leq}t{\leq}9$ and $3{\leq}t{\leq}s$ has generic Hilbert function. We extend the condition to $t$ = 10, so that it is true for $3{\leq}t{\leq}10$, which generalizes the result of [7].

• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.85-88
• /
• 2003

In this Paper, we report the experimental results of the Forward-flyback U-U converter with current doubler and synchronous rectifier. The experimental converter, that has a output voltage 3.3V, output current 20A, maximum power of 66W, switching frequency of 290kHz and input voltage range of 36-75V, has been successfully implemented. As a result, in the entire voltage range the measured full load efficiency was above 85$\%$, and the output voltage was regulated at 3.3V within $\pm3{\%}$ tolerance.

• Proceedings of the Optical Society of Korea Conference
• /
• 2005.07a
• /
• pp.150-151
• /
• 2005

Integral imaging is one of the three-dimensional(3D) display methods, which is an autostereoscopic method. The integral imaging system can provide volumetric 3D image which has both vertical and horizontal parallaxes. The elemental image which is obtained in the pickup process by lens array has the 3D information of the object and can be used for the depth perception and the 3D correlation. Moreover, the elemental image which represents a cyber-space can be generated by computer process.

• Advances in materials Research
• /
• v.3 no.4
• /
• pp.233-242
• /
• 2014

Magnetic and conducting aniline sulfide resin cross-linked (ASC-Fe3O4) nanocomposite has been prepared in the presence of aniline sulfide resin (ASR), aniline, $Fe_3O_4$ coated by polyethylene glycol (PEG) and initiator. The magnetic properties of the resulting composites showed ferromagnetic behavior, such as high-saturated magnetization (Ms= 41 emu/g), and coercive force (Hc=1.5 Oe). The saturated magnetization was increased by increasing of $Fe_3O_4$ content and decreased by increasing aniline ratio. The transmission electron micrograph (TEM) and X-ray diffraction proved that nanometer-sized about 20-30 nm $Fe_3O_4$ in the composite. The average size of ASC-$Fe_3O_4$ nanocomposite with core-shell structure was about 50-60 nm, and polydisperse. This approach may also be extended to the synthesis and modification of other polymers. Electrical conductivity of aniline sulfide resin cross-linked (ASC) nanocomposite has been studied by four-point probe method and produced $3.3{\times}10^{-4}S/cm$ conductivity for it. The conductivity of the composites at room temperature depended on the $Fe_3O_4$, aniline ratio and doping degree. The thermogravimetry analysis (TGA) results showed that this resin is thermal resistance near of $500^{\circ}C$. So, It can be used for resistance thermal coating for military applications. $Fe_3O_4$-PASC nanocomposite has been flexible structure with electrical and magnetic properties.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.4
• /
• pp.809-813
• /
• 2010

Although the goals of HL7 Version 2(V2) and Version 3(V3) are identical, the concepts of the implementation and technological basis are different; this makes their versions inconvertible. This problem interrupts technological innovation advanced from V2 to V3 and has been raised as a new type of barrier in the field of medical information system. This study intends to develop software to convert V2 to V3 which can be utilized in the actual medical environment. Since it is practically difficult to develop the whole tools that automatically change total V2 messages into V3 messages, this article has designed, implemented, and tested the software that allows mapping between V2 and V3 which function as tools. In order to test this program, it has used ADT^A03 of five V2 messages to generate V3 messages. It is expected that the result of this research will be one of the new methods allowing conversion between V2 and V3.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.417-422
• /
• 1998

he Reactor Coolant Gas Vent System(RCGVS) design for Ulchin Nuclear Power Plant Units 3&4(UCN 3&4) has been improved from the Yonggwang Nuclear Power Plant Units 3&4(YGN 3&4) based on the evaluation results for depressurization capability tests performed at YGN 3&4. There has been a series of plant safety analyses for Natural Circulation Cooldown(NCC) event and thermo-dynamic analyses with RELAP5 code for the steam blowdown Phenomena in order to optimize the orifice size of UCN 3&4 RCGVS. Baesd on these analyses results, the RCGVS orifice size for UCN 3&4 has been reduced to 9/32 inch from the l1/32 inch for YGN 3&4. The depressurization capability tests, which were performed at UCN 3 in order to verify the FSAR NCC analysis results, show that the RCGVS depressurization rates are being within the acceptable ranges. Therefore, it is concluded that the orificed flow path of UCN 3&4 RCGVS is adequately designed, and can provide the safety-grade depressurization capability required for a safe plant operation.

• Spatial Information Research
• /
• v.23 no.6
• /
• pp.57-66
• /
• 2015

Recently, the utilization of geospatial open platforms has been constantly increased and the interest in 3D geospatial data such as terrain, building and shopping mall has been increased significantly. In particular, rather than simplified 3D geospatial data, interest in high-precision 3D geospatial data which similarly represents the real world objects has increased significantly. In order to satisfy the demand for such the high-precision 3D geospatial data, various kinds of 3D geospatial open platforms has been developed and has provided services on the web. However, most of the 3D geospatial open platforms have been used plug-in module in order to ensure a fast 3D rendering performance on the web, despite the many problems such as difficulty of the installation, no supporting of cross browser/operating system and security issues. In addition, recently, the existing 3D geospatial open platforms based on plug-in module are facing a serious problem, by declaring the NPAPI service interruption in Chrome and Firefox browsers. In this study, we presents the design and implementation of a new 3D geospatial open platform based on HTML5/WebGL technology without the use of plug-ins. Such the new 3D geospatial open platform based on HTML5/WebGL may support cross browsers such as IE, Chrome, Firefox, Safari and cross OS platforms such as Windows, Linux, Mac and mobile OS platforms.