• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.12 no.5
• /
• pp.451-465
• /
• 1987

With the introduction of ISDN network, the D channel protocol has bee defined as a signalling method for ISDN user-network interface. Therefore the NT2(Network Termination 2) which carry out concentration and switching function, must process the D channel related information. This paper describes how the D channel protocoal is applied and implented in a small ISDN subscriber concentrating system that has NT2 functions. The application protocol proposed is addressed taking into consideration the compatibility with ISDN standard facilities, TE(Terminal Equipment) or ET(Exchange Terminator), This protocol has been implementes using a general multitask operating system and it has the features of the minimized information processing and the simpified algorithm which are suitable for a small system. Its application programs are divided into various tasks to facilitate the addition and the modification of function. In this paper, we briefly outline the protocol defined in CCITT and show the application protocol that has fitted in a small concentrating system with NT2 functions. Also we present the experimental results and implementation method of this protocol.

• Bulletin of the Korean Mathematical Society
• /
• v.58 no.3
• /
• pp.609-616
• /
• 2021

We study the solvability of the Fermat's matrix equation in some classes of 2-by-2 matrices. We prove the Fermat's matrix equation has infinitely many solutions in a set of 2-by-2 positive semidefinite integral matrices, and has no nontrivial solutions in some classes including 2-by-2 symmetric rational matrices and stochastic quadratic field matrices.

• Applied Microscopy
• /
• v.26 no.2
• /
• pp.235-241
• /
• 1996

Amophization and decomposition behaviour in $Mg_{62}Cu_{26}Y_{12}$ alloy prepared by melt spinning method and wedge type metal mold casting method have been investigated by a detailed transmission electron microscopy. Amorphous phase has formed in melt-spun ribbon. In the case of the wedge type specimen, however, the amorphous phase has formed only around the tip area within about 2 mm thickness. The remaining part of the wedge type specimen consists of crystalline phases, $Mg_{2}Cu\;and\;Cu_{2}Y$. The supercooling for crystallization behaviour of the amorphous $Mg_{62}Cu_{26}Y_{12}$ alloy, ${\Delta}T_x$ has been measured to be about 60 K. Such a large undercooling of the crystallization bahaviour enables formation of the amorphous phase in the $Mg_{62}Cu_{26}Y_{12}$ alloy under the cooling rate of $10^{2}K/s$. The amorphous $Mg_{62}Cu_{26}Y_{12}$ has decomposed into crystalline phases, $Mg_{2}Cu\;and\;Cu_{2}Y$ after heat treatment at $170^{\circ}C\;and\;250^{\circ}C$.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.2 no.2
• /
• pp.147-155
• /
• 2002

This paper describes RF front-end transceiver chipset for the dual-mode operation of PCS-Korea and IMT-2000. The transceiver chipset has been implemented in a $0.25\mutextrm{m}$ single-poly five-metal CMOS technology. The receiver IC consists of a LNA and a down-mixer, and the transmitter IC integrates an up-mixer. Measurements show that the transceiver chipset covers the wide RF range from 1.8GHz for PCS-Korea to 2.1GHz for IMT-2000. The LNA has 2.8~3.1dB NF, 14~13dB gain and 5~4dBm IIP3. The down mixer has 15.5~16.0dB NF, 15~13dB power conversion gain and 2~0dBm IIP3. The up mixer has 0~2dB power conversion gain and 6~3dBm OIP3. With a single 3.0V power supply, the LNA, down-mixer, and up-mixer consume 6mA, 30mA, and 25mA, respectively.

• Korean Journal of Pharmacognosy
• /
• v.51 no.2
• /
• pp.100-106
• /
• 2020

The extract of Cudrania tricuspidata is used in ethnomedicine throughout Eastern Asia in China, Korea and Japan. In Korean traditional medicine, Cudrania tricuspidata has been used to treat eczema, mumps, tuberculosis, contusions, insomnia and acute arthritis. In addition, it has been reported that root extract of Cudrania tricuspidata has anti-platelet effects. Therefore, we investigated which compound in Cudrania tricuspidata has inhibitory effect on platelet aggregation. In this study, we tried to explain the inhibitory mechanism of steppogenin from Cudrania tricuspidata on human platelet aggregation. Collagen-induced human platelet aggregation and [Ca²⁺]_i mobilization were dose-dependently inhibited by steppogenin and we determined the inhibition by steppogenin is due to the down regulation of extracellular-signal-regulated kinase(ERK) and inositol-1,4,5-triphosphate receptor type I(IP₃RI) phosphorylation. In addition, steppogenin inhibited collagen-induced fibronectin adhesion to αIIb/β3 and thromboxane A₂ generation. Thus, in the present study, steppogenin showed an inhibitory effect on human platelet aggregation, suggesting its potential use for preventing platelet-induced cardiovascular disease.

• Journal of the Korean Society for Heat Treatment
• /
• v.7 no.3
• /
• pp.206-218
• /
• 1994

In 50%$NH_3+Air+N_2$ atmospheres, the effect of air additions on the growth characteristics of the compound layer during oxynitriding at $570^{\circ}C$ for 2hr in carbon and alloy steels has been investigated. The ammount of apparent residual ammonia during oxynitriding has shown to be increased with air additions(9~36 Vol. %) and X-ray diffraction analysis of case oxynitreded has shown that the compound layer consist of ${\varepsilon}-Fe_{2-3}$(N, C) phase and ${\gamma}^{\prime}-Fe_4$(N,C) phase. In the case of carbon steels, the thickness of oxide layer, compound layer and porous layer and the amount of ${\varepsilon}-Fe_{2-3}$(N,C) phase in the compound layer were increased with additions of air in 50%$NH_3+N_2$ atmospheres. At the same gas composition, the thickenss of oxide layer, compound layer and porous layer in alloy steels showed slightly thin layer thickness compared to those of carbon steels and the ${\gamma}^{\prime}-Fe_4$(N,C) phase in the compound layer of alloy steels was found barely. Therefore, the most obvious effect of air addition in the gas nitriding atmosphere has been found to in crease further kinetics of nitriding reaction.

• Solar Energy
• /
• v.5 no.2
• /
• pp.46-53
• /
• 1985

Hydrogenated amorphous silicon solar cells which are fabricated by photo-chemical vapor deposition (photo-CVD) system has been investigated. In the photo-CVD system which consists of three separate reaction chambers, low-pressure mercury lamp has been used as a light source. The main reactant ($Si_2H_6/He$) gases which are premixed with a small amount of mercury vapor in a mercury-vaporizer kept at $50^{\circ}C$ have been used. Using $C_2H_2$ and $SiH_2(CH_3)_2$ as the carbon source, p-type wide band gap a-SiC:H films have been obtained. The result has been found that the undoped layers of the pin/substrate solar cells are influenced by the residual impurities, such as phosphorus and boron during the deposition process. By minimizing the effect of the impurities in the i-layer and optimizing conditions at the p-layer and p/i interface, the energy conversion efficiency of 9.61 % under AM-1 ($100mW/Cm^2$) has been achieved for pin/substrate solar cells illuminated through their p-layers, using the three separate reaction chamber apparatus. It is expected that a-SiC:H solar cells with the energy conversion efficiency over 10% have been fabricated by Photo-CVD method.

• Transactions on Electrical and Electronic Materials
• /
• v.4 no.5
• /
• pp.28-32
• /
• 2003

Europium-doped gadolinium oxide ($Gd_2O_3;Eu^{3+}$) phosphors have been prepared by combustion method using urea[H$_2$NCONH$_2$] or carbohydrazide[H$_2$NNHCONHNH$_2$] as fuel materials in a preheated furnace at 500$^{\circ}C$. The phosphors obtained were fired at 1200$^{\circ}C$ for 3 hours to get better luminescent properties. The combustion method used was found to be a simple and fast method for the preparation of fine-sized particles. The influence of the fuel/oxidant (urea or carbohydrazide/nitrate) mole ratio on the phosphor has been investigated and the optimum values for various parameters have been determined. By this method, phosphor that has better brightness and smaller size particles than that obtained by conventional method has been prepared.d has been prepared.

• Journal of the Korean Ceramic Society
• /
• v.34 no.7
• /
• pp.722-730
• /
• 1997

The nonstoichiometry (x) of UO2+x and (Er0.06U0.94)O2+x has been in-situ measure against oxygen activity (Po2) at elevated temperatures by a coulometric titration method. From the dependence of the oxygen excess (x) of UO2+x on Po2 at 1000℃, it has been concluded that (2Vo2Oia2Oib)〃〃and (2Vo2Oia2Oib)' clusters are prevailing at low oxygen partial pressure [log(Po2/atm) -10.6] and at high oxygen partial pressure [log(Po2/atm) -10.6], respectively. The nonstoichiometry is found to be reduced with the addition of Er, which is ascribed to the fact that the fixed-valent Er3+ reduces the oxidation capacities of UO2+x. The enthalpy of oxygen incorporation in (Er0.06li0.94)O2+x has been evaluated from the mean valences of U-ion as -180±70 kJ/mole.

• Journal of the Korean Chemical Society
• /
• v.58 no.2
• /
• pp.205-209
• /
• 2014

Hematite iron oxide (${\alpha}$-$Fe_2O_3$) nanowalls were fabricated on aluminum substrate by a facile solvent-assisted hydrothermal oxidation process. The XRD and EDS patterns indicate that the sample has a rhombohedral phase of hematite $Fe_2O_3$. FE-SEM, TEM, HR-TEM, SA-ED were employed to characterize the resulting materials. $N_2$ adsorption-desorption isotherms was used to study a BET surface area. Their capability of catalytic degradation of titan yellow GR azo dye with air oxygen in aqueous solution over $Fe_2O_3$ catalysts was studied. The result indicates that the as-prepared product has a high catalytic activity, because it has a larger surface area. Langmuir and Freundlich isotherms of adsorption dye on the catalysts surface were investigated and the decomposition of titan yellow GR follows pseudo-first order kinetic.