• Title/Summary/Keyword: H2O2

Search Result 18,254, Processing Time 0.048 seconds

Oxidation characterization of VOCs over noble metal catalyst using water treatment (Water 수처리를 이용한 귀금속 촉매의 VOCs 산화특성)

  • Kim, Moon-Chan
    • Analytical Science and Technology
    • /
    • v.18 no.2
    • /
    • pp.120-129
    • /
    • 2005
  • Volatile organic compounds (VOCs) have been recognized as major contributor to air pollution. The catalytic oxidationis is one of the most important processes for VOCs destruction due to the possibility getting high efficiency at low temperature. In this study, monometallic Pt, Ir and bimetallic Pt-Ir were supported to $TiO_2$. In order to distribute metals uniformly, $H_2O-H_2$ treatment method was used. Xylene, toluene and MEK were used as reactants. The monometallic or bimetallic catalysts were prepared by the excess wetness impregnation method and characterized by XRD, XPS, and TEM analysis. Pt catalyst showed higher conversion than Ir catalyst and Pt-Ir bimetallic catalyst showed the highest conversion. The catalysts prepared by $H_2O-H_2$ treatment had better VOC's conversion than that of nothing treatment. In the VOCs oxidation, Pt-Ir bimetallic catalysts had multipoint active sites, so it improved the range of Pt metal state. Therefore, bimetallic catalysts showed higher conversion of VOCs than monometallic ones. $H_2O-H_2$ treatment effected an uniform distribution of Pt particles. In VOCs oxidation was found to follow first order reaetion kinetics. The activation energy of $H_2O-H_2$ treatment catalysts was lower than that of untreated ones. In this study, the a small amount of Ir was used with Pt to promote the oxidation conversion of VOCs.

Hydrogen Peroxide Concentrations in Air in Seoul (서울시 대기 중 $H_2O_2$의 농도)

  • 강충민;김희강
    • Journal of Korean Society for Atmospheric Environment
    • /
    • v.16 no.1
    • /
    • pp.61-68
    • /
    • 2000
  • Gas-phase hydrogen peroxide(H2O2) concentrations were measured to investigate it's distribution in the ambient air in downtown Seoul(Kwanghwamum and Mullae-dong). These measurements were made during four season, from April 30, 1998 to January 29, 1999, using Cold Trap and HPLC. Measurements were also made of other photochemical oxidants and trace gases(O3, NO2, CO and SO2) and meteorological parameters(relative humidity, temperature, solar radiation and wind speed). The mean of all observations was 0.10 ppbv and the range measured was below the level of detection(>0.01 ppbv) to 0.47ppbv. The higher seasonal mean concentrations showed during the summer(0.21 ppbv) and concentrations of H2O2 showed a diurnal variation with maximum concentrations in the afternoon(12:30∼14:00). The results from the corrrelation analysis showed that the concentration of gaseous H2O2 is strongly dependent on the other air pollutants(NO2, CO and O3) and meteorological parameters(relative humidity, temperature and solar radiation.)

  • PDF

Pleiotrohpic Effect of a Gene Fragment Conferring H$_{2}$O$_{2}$ resistance in Streptomyces coelicolor

  • Um, Tae-Han;Oh, chung-Hun;Lee, Jong-Soo;Park, Yong-Doo;Roe, Jung-Hye;Kim, Jae-Heon
    • Journal of Microbiology
    • /
    • v.33 no.4
    • /
    • pp.339-343
    • /
    • 1995
  • We isolated a 10 kb Bam HI fragment originated from the chromosome of a $H_2O$$^2$-resistant mutant strain of Streptomyces coelicolor, which confer $H_2O$$^2$-resistance to S. lividance upon transformation. Among various subclones ot 10kb Bam HI fragment tested for their $H_2O$$^2$-resistant phenotype in S. lividans, a subclone containing 5.2 kb Bam HI-BglII fragment was found to be responsible for $H_2O$$^2$-resistance. The plasmid containing this 5.2 kb fragment was then transformed into S. coellicolor A3(2) at early and tested for their phenotype of $H_2O$$^2$-resistance and the change in various enzymes whose activity can be stained in the gel. We found out that the 5.2 kb insert DNA conferred $H_2O$$^2$-resisstance in S. coelicolor A3(2) at early phase of cell growth. The presence of this DNA also resulted in higher level of peroxidase compared with the wild type cell containing parental vector (pIJ702) only. Esterase activity was also higher in this clone. However, alcohol dehydrogenase activity decreased compared with the wild type. These results suggest that the presence of a gene in 5.2 kb BamHI-BglII DNA fragment causes multiple changes in S. coelicolor related to its response against hydrogen peroxide. The result also implies that not only peroxidase but also esterase may function in the defencse meahsnism agianst $H_2O$$^2$-.

  • PDF

Synthesis and Particle Size Control of δ-FeOOH Using H2O2 Oxidizing Agent (H2O2 산화제를 이용한 δ-FeOOH의 합성과 입자 크기 제어)

  • Seongmin Shin;Kyunghwan Kim;Jeongsoo Hong
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.37 no.3
    • /
    • pp.292-296
    • /
    • 2024
  • In this study, Iron (III) oxide-hydroxide (δ-FeOOH) was successfully synthesized using hydrogen peroxide (H2O2) as an oxidizing agent. The synthesis of δ-FeOOH was carried out by controlling the amount of H2O2, and pure δ-FeOOH was successfully synthesized in ranges from 0.2 mL to 0.6 mL of H2O2. The size of the synthesized δ-FeOOH particles was compared by controlling the amount of oxidant H2O2. The average particle size of the synthesized pure δ-FeOOH particles increased from 875.1 nm to 897.2 nm as the amount of H2O2 was increased. The optical properties of δ-FeOOH synthesized under these specific conditions were investigated. All δ-FeOOH showed a similar trend of increasing and decreasing light absorption from 800 nm to 400 nm, although there was a slight difference in the amount of light absorption, with the largest amount of light absorption at 410 nm. The band gap energy of δ-FeOOH through the Tauc plot method was about 2.1~2.2 eV when H2O2 was 0.2~1.4mL. With a sufficient small particle size, simple control of that particle size, and a small band gap energy enough to absorb light in the visible spectrum, δ-FeOOH could be useful in a variety of applications, including photoelectrochemistry and battery electrodes.

Surface Modification of Mica Using TiO$_2$ prepared by Alkoxide Hydrolysis Method (알콕사이드 가수분해법에 의핸 제조된 TiO$_2$ 분말을 이용한 Micad의 표면 개질)

  • 한상필;윤영훈;이상훈;최성철
    • Journal of the Korean Ceramic Society
    • /
    • v.36 no.7
    • /
    • pp.691-697
    • /
    • 1999
  • TiO2 powder was adsorbed on the surface of mica using the heterocoagulation method in water TiO2 powder was prepared from hydrolysis of titanium-iso propoxide in a mixed solvent of anhydrous ethanol and water. When the molar ratio of water to titanium iso-propoxide was 0.25 monodispersed spherical TiO2 particles were obtained. The prepared TiO2 powder showed anatase phase after heat treatment at 50$0^{\circ}C$ for 2 h and then transformed to rutile phase after heat treatment at 100$0^{\circ}C$ for 2h. The iso-electric points of TiO2 and Mica were pH 3.9 and pH 3.25 respectively which were measured by the Z-potential analysis in water base. The maximum Z-potential difference between two powders was observed in the range of pH 3.6~3.7 TiO2 powder was adsorbed on the surface of mica by heterocoagulation method in pH 3.6~3,7 The properties of prepared TiO2 powder was haracterized by TG-DTA, XRD and SEM The morphology and thermal properties of TiO2-adsorbed mica were examined.

  • PDF

Phase stability of TiO2 synthesized by Sol-gel Method at various pH and calcination temperatures (졸-겔 방법으로 합성된 TiO2 상안정성에 대한 pH 및 열처리 온도의 영향)

  • Lee, Jae-Yeon;Kim, Yong-Jin;Kim, Dae-Sung;Shin, Hyo-Soon;Nahm, Sahn;Chun, Myoung-Pyo
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.31 no.4
    • /
    • pp.166-173
    • /
    • 2021
  • The rutile phase of TiO2 forms a stable phase at high temperatures compared to anatase phase, but the stable temperature range of anatase changes depending on the synthesis conditions. In this study, nano-sized TiO2 was synthesized by the Sol-gel method using TiOSO4 and a mixed solvent of ethanol and distilled water, and the phase change of anatase and rutile according to pH and heat treatment temperature was investigated. Changes in the ratio of anatase and rutile were observed by changing the pH (3, 5, 7, 9) and heat treatment temperature (500, 600, 700, 800, 900℃) conditions of the prepared TiO2. As a result of observing these changes through XRD and FE-SEM analysis, anatase TiO2 at 500℃ and rutile TiO2 at 900℃ were observed. According to the pH, at these intermediate temperatures of 600, 700 and 800℃, the ratio of anatase and rutile changes. At 700℃, it was concluded that pH = 3~5 had a larger ratio of anatase TiO2, and pH = 7~9 had a larger ratio of rutile TiO2.

Microbial 2-Cys Peroxiredoxins: Insights into Their Complex Physiological Roles

  • Toledano, Michel B.;Huang, Bo
    • Molecules and Cells
    • /
    • v.39 no.1
    • /
    • pp.31-39
    • /
    • 2016
  • The peroxiredoxins (Prxs) constitute a very large and highly conserved family of thiol-based peroxidases that has been discovered only very recently. We consider here these enzymes through the angle of their discovery, and of some features of their molecular and physiological functions, focusing on complex phenotypes of the gene mutations of the 2-Cys Prxs subtype in yeast. As scavengers of the low levels of $H_2O_2$ and as $H_2O_2$ receptors and transducers, 2-Cys Prxs have been highly instrumental to understand the biological impact of $H_2O_2$, and in particular its signaling function. 2-Cys Prxs can also become potent chaperone holdases, and unveiling the in vivo relevance of this function, which is still not established, should further increase our knowledge of the biological impact and toxicity of $H_2O_2$. The diverse molecular functions of 2-Cys Prx explain the often-hard task of relating them to peroxiredoxin genes phenotypes, which underscores the pleiotropic physiological role of these enzymes and complex biologic impact of $H_2O_2$.

Synthesis of Monodisperse ZnO Nanoparticles Using Semi-batch Reactor and Effects of HPC Affecting Particle Size and Particle Size Distribution (반회분식 반응을 이용한 단분산 ZnO 나노 입자의 제조 및 입자의 크기와 입도 분포에 영향을 미치는 HPC의 작용)

  • Rho, Seung Yun;Kim, Ki Do;Song, Gun Yong;Kim, Hee Taik
    • Applied Chemistry for Engineering
    • /
    • v.17 no.3
    • /
    • pp.274-279
    • /
    • 2006
  • To synthesize ZnO colloidal solution by a sol-gel process, zinc acetate ($C_{4}H_{6}O_{4}Zn{\cdot}2H_{2}O{\cdot}0.2\;mol$) and lithium hydroxide ($LiOH{\cdot}H_{2}O{\cdot}0.14\;mol$) in the ethanol were added to the solution containing a dispersing agent, hydroxypropyl cellulose (HPC). The nanosize and physical shape of the synthesized ZnO particles were determined by HPC acting as the dispersing agent. Nanosized ZnO particles were also obtained by a precipitation method based on zinc-2-ethylhexagonate. The precipitates were characterized by DLS, XRD, FE-SEM, and UV-vis. As the results, the ZnO colloids tend to self-assemble into a well-ordered hexagonal close-packed structure. The ZnO nanoparticles have an average diameter of nearly 40 nm with a narrow size distribution.

Study on Formation and Properties of Dioxomolybdenum Complexes (디옥소몰리브덴 착물의 합성과 그 성질에 대한 연구)

  • Sang-Oh Oh;Bon-Kweon Koo
    • Journal of the Korean Chemical Society
    • /
    • v.30 no.5
    • /
    • pp.441-448
    • /
    • 1986
  • Dioxobis(sub.-salicylaldiminato) molybdenum (VI) complexes, $MoO_2\;(X-sal-N-R)_2,\;(X=H,\;5-CH_3,\;R=C_6H_5,\;p-F-C_6H_4,\;m-Cl-C_6H_4,p-I-C_6H_4\;and\;p-C_2H_5-C_6H_4)$, have been prepared by reactions of dioxobis(sub.-salicylaldehydato) molybdenum (VI), $MoO_2(X-sal)_2$ with primary amines, in which $MoO_2(X-sal)_2$ complexes were obtained by acidification of a mixture solution of ammonium paramolybdate in water and appropriate salicylaldehyde in methanol. All these complexes show two strong Mo=O stretching imodes in the 900-940$cm^{-1}$ and p.m.r. spectra exhibited only one signal for the azomethine group. These results confirmed that the complexes are six-coordinated octahedron with a $cis-MoO_2$ group and the geometrical configurations of the complexes possess a C2 axis of symmetry. From the mass analyses of the complexes, it found that the composition ratios of $MoO_2$ : ligand are 1 : 2. The charge transfer transition corresponding to N-Mo, and O-Mo occured at 29,000$cm^{-1}$ and 32,000$cm^{-1}$ respectively. Where, the complexes were found to be non-ionic materials by conductivity measurements in dimethylformamide.

  • PDF

Temperature reliability analysis according to the gate dielectric material of 4H-SiC UMOSFET (4H-SiC UMOSFET의 gate dielectric 물질에 따른 온도 신뢰성 분석)

  • Jung, Hang-San;Heo, Dong-Beom;Kim, Kwang-Su
    • Journal of IKEEE
    • /
    • v.25 no.1
    • /
    • pp.1-9
    • /
    • 2021
  • In this paper, a 4H-SiC UMOSFET was studied which is suitable for high voltage and high current applications. In general, SiO2 is a material most commonly used as a gate dielectric material in SiC MOSFETs. However, since the dielectric constant value is 2.5 times lower than 4H-SiC, it suffers a high electric field and has poor characteristics in the SiO2/SiC junction. Therefore, the static characteristics of a device with high-k material as a gate dielectric and a device with SiO2 were compared using TCAD simulation. The results show BV decreased, VTH decreased, gm increased, and Ron decreased. Especially when the temperature is 300K, the Ron of Al2O3 and HfO2 decreases by 66.29% and 69.49%. and at 600K, Ron decreases by 39.71% and 49.88%, respectively. Thus, Al2O3 and HfO2 are suitable as gate dielectric materials for high voltage SiC MOSFET.