• Journal of Korean Society of Transportation
• /
• v.28 no.6
• /
• pp.17-24
• /
• 2010

As various social problems occur due to increasing traffic accidents, the government has setup and executed strong safety policies. As a result, the number of traffic accidents and the death toll have been decreasing in recent years. However, the setup and execution of the various policies for reducing traffic accidents cost much, so it is necessary to evaluate the cost-effectiveness of each policy. In the present study, enforcement by means of an unmanned over-speed enforcement system, the enforcement effect of which was proven good compared to the cost required for traffic enforcement, is compared with enforcement by policemen. As a result of the comparison, the average speed was 82.66 km/h before the use of unmanned systems and policemen; the average speed with manned enforcement was 70.57 km/h; and the average speed with unmanned systems was 67.85 km/h. The speed limit violation rate was 65% before the use of unmanned systems and policemen; 32% with manned enforcement; and 15% with unmanned systems. Considering the kinds of vehicles, the average speed and violation rate were highest among private cars, then vans, and then trucks.. Considering lanes. The accident rate was estimated based on the above results, and the input cost-to-advantage was estimated. The annual cost-to-advantage was estimated by comparing the above estimated values with the conditions before the unmanned over-speed enforcement system. Subsequently, the enforcement by policemen showed a negative advantage of 76,130,590 won, and the enforcement by the unmanned system showed a positive advantage of 38,577,670 won.

• Journal of Embryo Transfer
• /
• v.15 no.3
• /
• pp.211-218
• /
• 2000

This experiment was conducted to investigate the effect of the cysteine and glutathione on the motility index and morphology of human spermatozoa at the sperm processing in vitro. After treating the sperm with medium containing cysteine and glutathione, we measured the motility index and morphology at 0.5 h and 24 h. 1. Following the sperm culture for 0.5 h after treating the sperm with the medium containing 0, 1, 5, 10 mM cysteine, curvilinear velocity (VCL) was significantly (p<0.05) higher in control than that in all treatments. And straight-line velocity (VSL) was high at 1 mM and average path velocity (VAP) was low at 5 mM and 10 mM. But the motility (MOT) and morphology (NOM) were not different between control and all treatments. Following the sperm culture for 24 h, the MOT was significantly high in treatment groups (58.9, 74.4 and 62.3%), compared with that in control(28.7%) and the VCL was also high in treatment groups (31.4, 37.9, and 34.0 ${\mu}{\textrm}{m}$/s), compared with that in control (21.3 ${\mu}{\textrm}{m}$/s). The VSL (18.4, 21.7, and 18.9 ${\mu}{\textrm}{m}$/s) was significantly higher than control (10.7 ${\mu}{\textrm}{m}$/s) and the VAP (20.3, 24.7, and 21.4 ${\mu}{\textrm}{m}$/s) in treatments was also compared with that in control (12.6 ${\mu}{\textrm}{m}$/s). The NOM was not difference between control and treatments. 2 Following the sperm culture for 0.5 after treating the sperm with the medium containing 0, 1, 5, 10 mM glutathione, the MOT, VCL, VSL, VAP, and NOM were not different between control and treatments. Following the sperm culture for 24 h, the MOT was higher in treatment groups (82.9, 83.6, 83.4%) than in control (51.1%) and the VCL was higher in treatment groups (50.9, 51.3, and 49.4 ${\mu}{\textrm}{m}$/s) than control (34.1 ${\mu}{\textrm}{m}$/s). The VSL was also higher in treatment (17.1 ${\mu}{\textrm}{m}$/s) and the VAP was also higher in treatment groups (30.1, 32.5, and 29.7 ${\mu}{\textrm}{m}$/s) than in control (19.8 ${\mu}{\textrm}{m}$/s). The NOM was not different between control and treatments.

• Food Science of Animal Resources
• /
• v.24 no.1
• /
• pp.50-56
• /
• 2004

The wienner sausage(natural casing, N), wienner sausage(collagen casing, C), frankfurter sausage(F) and can products[spam(S), luncheon meat(L), jangjorim(J)] were obtained from different Korean meat processing companies and investigated for their salinity, saccharinity, pH, moisture and fat content, meat color and sensory evaluation. In sausage products, the saccharinity percent ranged 4.9∼5.0 in N, 6.6∼8.0 in C, and 5.2∼6.5 in F. The salinity percent of C and F were slightly higher than that of N. The pH values of all sausage product were above 6.0. The L＊ values of N were ranged 49.8∼56.7, which were slightly lower than those of C and R The sausage with high content of crude fat and high L＊value earned the highest score in overall acceptability. In can products, saccharinity percentage was higher in J compared to the S and L. The salinity percentage of S was slightly higher than those of Land J. In meat color, L＊ and a＊ values were not different between S and L, although b＊ value of L was slightly higher than that of S and J. There were not significantly different among can products, however, the product containing low-salt had the highest score in overall acceptability.

• Advances in concrete construction
• /
• v.10 no.5
• /
• pp.403-416
• /
• 2020

This study investigated the effect of alkaline activators - NaOH_aq (NH) (NH: 0-16 M) and Na₂SiO_3aq (NS) (NS/NH: 0-3.5) in the synthesis of silico-manganese fume (SMF) and ground blast furnace slag (BFS) blended alkali-activated mortar (AASB). The use of individual activator was ineffective in producing AASB of sufficient fresh and hardened properties, compared to the synergy of both activators. This may be attributed to incomplete dissolution and condensation of oligomers required for gelation of the binder. An inverse relationship was noted among the fresh properties and the NH concentration or NS/NH ratio. This was influenced by the dissolution and condensation of silicate monomers under polymerization process. The maximum 28-day strength of ~45 MPa, setting time of 60 min and flow of 182 mm was obtained with the use of combined activators (10M-NH and NS/NH=2.5). The combined activators at NS/10M-NH=2.5 constituted SiO₂/Na₂O, H₂O/Na₂O and H₂O/SiO₂ molar ratio of 1.61, 17.33 and 10.77, respectively. This facilitated the formation of C-S-H, C/K-A-S-H and C-Mn-S-H in the framework together with an increase in the crystallinity due to more silicate re-organization within the aluminosilicate chain. On comparison of the high concentrated with mild alkali synthesized product, it revealed that the concentration of OH^- and Si monomers together with alkali metals influenced the dissolution of precursors and embedment of the constituent elements in the polymeric matrix. These factors eventually contributed to the microstructural densification of the mortar prepared with NS/10M-NH=2.5 thereby enhancing the compressive strength.

• Ocean and Polar Research
• /
• v.31 no.3
• /
• pp.231-238
• /
• 2009

A study was carried out to investigate the effect of water temperature on daily pattern and rate of total ammonia nitrogen (TAN) excretion in juvenile dark-banded rockfish Sebastes inermis (mean body weight: $14.8{\pm}0.3g$) under fasting and feeding conditions. Fish were acclimated over 10 days under three different water temperatures (15, 20 and $25^{\circ}C$). After 72 hours of starvation, fasting TAN excretion was measured at each temperature. To investigate post-prandial TAN excretion, fish were hand-fed with a commercial diet containing 47.7% crude protein for 7 days, two times daily at 09:00 and 17:00 hr. Water was sampled from both the inlet and outlet of each chamber every 2 hrs over a 24 hr period. Both fasting and post-prandial TAN excretion increased with increase in water temperature (P<0.05). Mean fasting TAN excretion rates at 15, 20 and $25^{\circ}C$ were 8.1, 9.0 and 9.2 mg TAN kg $fish^{-1}h^{-1}$, respectively. The value of $15^{\circ}C$ was lower than those of 20 and $25^{\circ}C$ (P<0.05), but there was no significant difference between $20^{\circ}C$ and $25^{\circ}C$ (P>0.05). Mean post-prandial TAN excretion rates at 15, 20 and $25^{\circ}C$ were 20.1, 22.9 and 23.4 mg TAN kg $fish^{-1}h^{-1}$, respectively. A peak post-prandial TAN excretion rate occurred after 12 hrs from the first feeding at $15^{\circ}C$ (mean 28.7 mg TAN kg $fish^{-1}h^{-1}$), $20^{\circ}C$ (33.7 mg TAN kg $fish^{-1}h{-1}$) and $25^{\circ}C$ (36.8 mg TAN kg $fish^{-1}h{-1}$), respectively. The TAN loss for ingested nitrogen at $15^{\circ}C$ (36.2%) was lower than that of $20^{\circ}C$ (40.8%) and $25^{\circ}C$ (41.7%). Based on overall results, water temperature exerts a profound influence on the nitrogen metabolism of juvenile dark-banded rockfish.

• Korean Journal of Food Science and Technology
• /
• v.35 no.2
• /
• pp.206-210
• /
• 2003

Effects of NaCl concentration (0, 1, 2, and 3%) on the physico-chemical characteristics of dark, firm, dry (DFD) and normal meat batter were examined. Before heating, pH values of DFD and normal meat batter decreased up to 0.23 (DFD) and 0.2 (normal) units, which after heating increased up to $0.16{\sim}0.28$ and $0.17{\sim}0.23$ units, as NaCl concentration increased from 0 to 3%. Cooking loss and diameter reduction of DFD meat batter were lower than those of nomal meat batter and decreased. whereas protein solubilities and emulsion stabilities of DFD and normal meat increased, with increasing NaCl concentration. Protein solubility and emulsion stability of DFD meat were higher than those of nomal meat (p<0.05). Viscosity and hardness of DFD meat batter were higher than those of normal meat batter and increased as NaCl concentration increased from 0 to 3%.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.3
• /
• pp.382-390
• /
• 2015

This work was conducted to investigate the performance and meat characteristics of commercial Korean native duck (KND). A total of 180 1-d-old ducklings of 2-way crossbreds from A and B lines (from National Institute of Animal Science) were used in this work and divided into 4 groups (3 replicates/group, 15 birds/replicate). The four groups were 4 crossbreds as AA (A line [♀]${\times}$A line [♂]), AB (A line [♀]${\times}$B line [♂]), BB (Pure line B strains) and BA (B strains [♀]${\times}$A strain [♂]). Ducks were fed diets based on corn-soybean meal for 0 to 3 wk (22.4% crude protein [CP], 2,945 kcal/kg metabolizable energy [ME]) and 3 to 8 wk (18.4% CP, 3,047 kcal/kg ME). As a result of this study, average body weight of 4 crossbreds were 625, 1,617, 2,466, and 2,836 g at 2, 4, 6, and 8 weeks, respectively, and significantly increased over the period of time (p<0.05). Body weight of BB group was greater than other crossbreds at the age of 6 weeks (p<0.05). There was a significant difference in weekly body weight gains (p<0.05), which were 573, 991, 850, and 371 g at 2, 4, 6, and 8 weeks old, respectively. Uniformity of 4 crossbreds was 84.9%, 80.5%, and 72.5% at 6, 7, and 8 weeks, respectively, and there was no difference among crossbreds. Body weight gain of BB crossbred was highest among crossbreds (p<0.05). Weekly feed intake significantly increased with weeks as 669, 1,839, 2,812, and 3,381 g at 2, 4, 6, and 8 weeks respectively (p<0.05). Feed intakes of AA and BB crossbreds were higher at 2 to 4 weeks old than others and that of BB crossbred was highest at 4 to 6 weeks old (p<0.05). Weekly feed conversion ratios were 1.17, 1.86, 3.32, and 9.37 at 0 to 2, 2 to 4, 4 to 6, and 6 to 8 weeks old, respectively, and it increased with age (p<0.05). There was no significant difference in feed conversion ratio among crossbreds. Carcass yields of 4 crossbreds were 73.6%, 71.6%, 73.5%, and 71.7%, respectively, so there was no significant difference among crossbreds. There was no difference in wing, neck, breast and leg ratios among crossbreds. However, back ratios of 4 crossbreds were 17.6%, 18.0%, 15.8%, and 17.6%, respectively, and back ratio of BB was the highest among crossbreds. Finally, these results may provide the basic data on the production, carcass quality, fatty acid and amino acid composition of commercial KND with 2-way crossbreeding.

• Journal of Embryo Transfer
• /
• v.22 no.2
• /
• pp.89-95
• /
• 2007

The present study was conducted to examine some factors affecting in vitro development and fecundity of embryos recloned with somatic cell nuclear transfer (SCNT). Fibroblast cells retrieved from the ear of a 3-week-old, cloned Korean goat (Jinsoonny) were used as karyoplast donors and serum-starvation was conducted in tissue culture medium (TCM)-199 supplemented with 0.5% FBS. Recipient oocytes were surgically collected by flushing the oviducts 35 h after hCG injection following FSH priming. The zonae pellucidae of the oocytes were partially perforated with a laser drill and a donor cell was transferred into an enucleated oocyte. The couplets were electrically fused and activated by ionomycin (5 min) and 6-DMAP (4 h). The reconstructed embryos were cultured in mSOF medium containing 0.8% BSA at $39^{\circ}C$ in an atmosphere of 5% $CO_2$, 5% $%O_2$, 90% $N_2$ for 12 to 15 h. Re-cloned embryos (2- to 4-cell stages) were surgically transferred into the oviducts of the recipients and pregnancy was subsequently diagnosed by progesterone assay and ultrasound on Days 21 and 63 of pregnancy. The fusion rate following 1st fusion pulse was higher (p<0.05) in 2nd cloning (65.9%) compared to 1st cloning (51.0%), but it was not different in the other groups. The rate of cleavage after fusion was significantly higher (p<0.05) in 1st (77.7%) than in 2nd cloning (56.0%). A total of 175 re-cloned embryos were transferred into 28 recipients. On day 21 and 60 after transfer, 11 (39.3%) and 4 recipients (17.4%) were pregnancy, respectively. In comparison of pregnancy rate by estrous synchronization, a total of 66 and 109 re-cloned embryos were transferred into 11 recipients in natural estrus and 17 recipients in induced estrus, respectively. Five (45.4%) and 2 recipients (18.2%) in natural estrus were pregnant on days 21 and 63 while 6 (35.3%) and 2 (11.8%) recipients in induced estrus were pregnant, respectively. These results show that recloning of goat can be achieved by SCNT and estrous synchronization between donor and recipient animals may be one of the major factors affecting success rate.

• Journal of Korean Society of Forest Science
• /
• v.70 no.1
• /
• pp.28-37
• /
• 1985

In order to estimate breast-height form factors of Pinus thunbergii and Cryptomeria japonica, 8 models based on tree age, diameter at breast height and tree height were suggested and evaluated. It was the following equations that turned out to be most fit for estimating them; for Pinus thunbergii, $F=0.553-4.567\;1/A+71.409\;1/A^2$ ($R^2=0.928$), based on tree age, ($6.727^{**}$) ($14.100^{**}$) $F=0.356+1.774\;1/D-0.770\;1/D^2$ ($R^2=0.944$), based on diameter at breast height, ($15.102^{**}$) ($2.908^{**}$) $F=0.316+1.546\;1/H+0.397\;1/H^2$ ($R^2=0.941$), based on tree height, ($8.380^{**}$) ($3.896^{**}$) for Cryptomeria japonica, $F=0.400+2.348\;1/A+17.053\;1/A^2$ ($R^2=0.889$), based on tree age, ($3.501^{**}$) ($3.298^{**}$) $F=0.353+2.118\;1/D-1.462\;1/D^2$ ($R^2=0.923$), based on diameter at breast height, ($14.873^{**}$) ($3.545^{**}$) $F=0.403+0.427\;1/H+2.843\;1/H^2$ ($R^2=0.887$), based on tree height. ($3.254^{**}$) ($5.742^{**}$) The above estimated breast-height form factors proved to be overestimated for young trees and small diameter trees, and to be underestimated for old trees and large diameter trees, in comparison to generally accepted figure in Korea, that is, the form factor of 0.45.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.2
• /
• pp.57-65
• /
• 2000

Objective of research is obtain fundamental data of carbonized wood wastes for soil condition, de-ordorization, absorption of water, carrier for microbial activity, and purifying agent for water quality of river. The carbonization technique and the properties of carbonized wood wastes(wood-based materials) were analyzed. Proximate analysis showed the wood-based materials contains 0.37~2.27% ash, 70~74% volatile matter, and 17~20% fixed carbon. As carbonization temperature was increased, the charcoal yield was decreased. However, no difference in charcoal yield was found due to time increase. The specific gravity after the carbonization decreased about 30~40% comparing to green wood. The charcoal had 1.08~4.18% ash, 5.88~13.79% volatile matter, and 80.15~90.94% fixed carbon. The pH of plywood and particleboard(pH 9 at $400^{\circ}C$, pH 10 at $600^{\circ}C$ and $800^{\circ}C$) made charcoals was higher than that of fiberboard. The water-retention capacity was not affected by the carbonization temperature and time. The water-retention capacity within 24h was about 2~2.5 times of sample weight, and the Equilibrium moisture content(EMC) became 2~10% after 24h. EMC of charcoal from the thinned trees were 9.40~11.82%($20^{\circ}C$, RH 90%), 6.87~7.61%($20^{\circ}C$, RH 65%), and 1.69~2.81%($20^{\circ}C$, RH 25%). EMC of charcoal from the wood-based materials under $20^{\circ}C$, relative humidity(RH) 90% was similar to EMC of charcoal from the thinned trees(9~11 %). However, under $20^{\circ}C$, RH 25.65%, EMC of charcoal from the wood-based materials were higher(2~3%) than EMC of charcoal from the thinned trees. Every charcoal from the wood-based materials fulfilled the criteria in JWWA K 113-1947.