• Journal of the Korean Wood Science and Technology
• /
• 제39권2호
• /
• pp.156-162
• /
• 2011

To evaluate the bonding performance of reinforced glulam, the textile type of glass fiber and aramid fiber, and the sheet type of glass fiber reinforced plastic (GFRP) and carbon fiber reinforced plastic (CFRP) were used as reinforcements. The reinforced glulam was manufactured by inserting reinforcement between the outmost and middle lamination of 5ply glulam. The types of adhesives used in this study were polyvinyl acetate resins (MPU500H, and MPU600H), polyurethane resin and resorcinol resin. The block shear strengths of the textile type in glass fiber reinforced glulam using MPU500H and resorcinol resin were higher than 7.1 N/$mm^2$, and these glulams passed the wood failure requirement of Korean standards (KS). In case of the sheet types, GFRP reinforced glulams using MPU500H, polyurethane resin and resorcinol resin, and CFRP reinforced glulams using MPU500H and polyurethane resin passed the requirement of KS. The textile type of glass fiber reinforced glulam using resorcinol resin after water and boiling water soaking passed the delamination requirement of KS. The only GFRP reinforced glulam using MPU500H after water soaking passed the delamination requirement of KS. We conclude that the bonding properties of adhesive according to reinforcements are one of the prime factors to determine the bonding performance of the reinforced glulam.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.427-431
• /
• 2005

In this study, 6' GaAs wafer bonding system is designed and optimized to bond 6 inches device wafer and material wafer. Bonding process is performed in vacuum environment and resin is used to bond two wafers. Vacuum module and double heating mechanisms are adopted to minimize wafer warpage and void. Structure and heat transfer analysis, et al of the core modules review the designed mechanisms are very effective in performance improvement. As a result, high productivity (tack time cut-down) and stabilized process can be obtained by reducing breakage failure of wafer.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.430-433
• /
• 2005

Laser bonding between similar and dissimilar thermoplastics has been investigated by making use of laser transmission weld technique. Spot welding of two layers of plastic materials has been demonstrated by using of a high-quality diode-laser with 808nm wavelength. Weld areas increases according to power density, exposure time. The results of peel out test show that peel strengths increase with the area of molten plastics. Layers, which have the same chemical properties, have good bonding qualities. A bonding method which dye film is coated on the interface is used for laser bonding between plastics with high transmission for laser wavelength. Laser transmission bonding is worthy of attention because it is not in contact, requires a few tooling devices, allows a flexible energy delivery and produces nearly invisible welds

• International Journal of Automotive Technology
• /
• 제7권5호
• /
• pp.565-570
• /
• 2006

The development of a light-weight vehicle is in great demand for enhancement of fule efficiency and dynamic performance. The vehicle weight can be reduced effectively by using lightweight materials such as aluminum and magnesium. However, if such materials are used in vehicles, there are often instances when different materials such as aluminum and steel need to be joined to each other. The conventional joining method, namely resistance spot welding, cannot be used in joining different materials. Self-piercing rivet(SPR) and adhesive bonding, however, are good alternatives to resistance spot welding. This paper is concerned with the crushing test of double hat-shaped member made by resistance spot welding, SPR and adhesive bonding. Various parameters of crashworthiness are analyzed and evaluated. Based on these results, the applicability of SPR and adhesive bonding are proposed as an alternative to resistance spot welding.

• 소성∙가공
• /
• 제22권8호
• /
• pp.463-469
• /
• 2013

In the previous work, a new forging process design, which included incremental upsetting, diffusion bonding and cogging, was suggested as a method to manufacture 1.9wt%C ultrahigh carbon workrolls. The previous study showed that incremental upsetting and diffusion bonding are effective in closing voids and healing of the closed void. In addition, compression tests of the 1.9wt%C ultrahigh carbon steel revealed that new microvoids form within the blocky cementite at temperatures of less than $900^{\circ}C$ and that local melting can occur at temperatures over $1120^{\circ}C$. Thus, the forging temperature should be controlled between 900 and $1120^{\circ}C$. Based on these results, incremental upsetting and diffusion bonding were used to check whether they are effective in closing and healing voids in a 1.9wt%C ultrahigh carbon steel. The incremental upsetting and diffusion bonding were performed using sub-sized specimens of 1.9wt%C ultrahigh carbon steel. The specimen was deformed only in the radial direction during the incremental upsetting until the reduction ratio reached about 45~50%. After deformation the specimens were kept at $1100^{\circ}C$ for the 1 hour in order to obtain a high bonding strength for the closed void. Finally, microstructural observations and tensile tests were conducted to investigate void closure behavior and bonding strength.

• 한국안전학회지
• /
• 제7권3호
• /
• pp.99-107
• /
• 1992

Weld bonding can be applied as a combined method of spot welding and adhesive to have more advantages than those. Weld bonding has many merits that enlarge the fatigue strength of spot Welding and also improve the creep of adhesive. But it has not beer proved well in the various environmental conditions. In this study, weld bonding test for fatigue properties and tensile strength is presented under such various coditions as temperatures, humidity, and etc.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 추계학술대회 논문집
• /
• pp.327-328
• /
• 2007

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.687-688
• /
• 2009

• 대한화학회지
• /
• 제54권3호
• /
• pp.275-282
• /
• 2010

분자 내 수소결합 가능성을 가지고 있는 2-fluorocyclopropanemethanol과 2-chlorocyclopropanemethanol에 대하여 MP2/6-311++G(d,p) 방법과 B3LYP/6-311++G(d,p) 방법으로 최적화 계산을 수행하였다. 두 분자 모두 가장 안정한 conformer에서 O-H의 수소가 F나 Cl을 향하고 있어 수소결합 가능성을 보이기는 하나 $H{\cdots}F$, $H{\cdots}Cl$ 거리가 van der Waals radii보다 커서 강한 수소결합이라 보기 힘들고 두 번째 안정한 conformer의 경우가 가까운 $H{\cdots}F$, $H{\cdots}Cl$ 거리를 보이며 더 강한 수소결합 가능성을 보였다. 그러나 에너지가 5 ~ 7 kJ 더 높게 나타났다. Methanol group과 F나 Cl이 서로 반대 방향을 향할 때 일반적으로 안정하나 앞의 가장 안정한 conformer보다는 에너지가 높다.

• 마케팅과학연구
• /
• 제18권3호
• /
• pp.115-132
• /
• 2008

산업재 거래관계에서 구매자와 공급업체간의 장기 거래관계의 형성은 전형적인 현상이며 그동안 많은 연구들이 이러한 장기관계의 결정 요인과 그로 인한 결과에 관해 다양한 연구들을 수행해 왔다고 할 수 있다. 특히 금속산업은 산업재의 대표적인 산업 분야로 미국 금속산업 시장의 경우 기업당 평균 매출이 최소 10억 달러가 넘는 중요한 시장이라고 볼 수 있다. 본 연구에서는 이러한 중요한 의미를 갖는 미국 금속산업 시장에서 구매기업과 공급기업간의 거래관계를 형성하는 대표적인 요인으로 구조적 결합이라는 개념을 정립하고 이러한 구조적 결합을 결정하는 네가지 주요 변수(기술, 대체안 비교수준, 거래특유자산, 거래 중요성)들을 찾아내 이를 연구모형화하고 각각의 변수에 대한 연구가설을 다음과 같이 설정하였다. H1: 기술수준은 구조적 결합에 정의 영향을 미칠 것이다. H2: 대체안 비교수준은 구조적 결합에 정의 영향을 미칠 것이다. H3: 거래특유자산은 구조적 결합에 정의 영향을 미칠 것이다. H4: 거래의 중요성은 구조적 결합에 정의 영향을 미칠 것이다. H5: 구조적 결합은 몰입의 수준에 정의 영향을 미칠 것이다. 연구 가설의 검증을 위해 미국 금속산업에서 400개 기업을 선정해 설문조사를 실시 하였고 총 139개의 설문지를 회수하여 최종 분석에 사용하였다. 연구 가설과 연구 모형의 검증을 위해 구조방정식 모형과 LISREL을 사용하였고 최종 분석 결과 모든 가설이 체택되었다. 마지막으로 본 연구결과를 통한 마케팅전략적 시사점과 연구가 갖는 한계점에 대하여도 결론 부분에서 토론하였다.