• 제목/요약/키워드: H-G model

검색결과 1,727건 처리시간 0.03초

低氣壓이 흰쥐의 血淸蛋白質에 미치는 影響 (Effect of Low Atmospheric Pressure on Serum Protein of Rats)

  • Kim, Hyung-Suk;Nam, Sang-Yul
    • 한국동물학회지
    • /
    • 제18권1호
    • /
    • pp.9-18
    • /
    • 1975
  • 成熟한 Sprague-Dawley 系인 雄性 흰쥐를 對照群과 實驗群으로 나누어, 對照群은 760 mmHg인 正常氣壓에 實驗群은 500 mmHg 및 380 mmHg의 低氣壓에 15時間(1日當 1時間)曝露시켰다. 曝露期間中 여러 時間區에서 總 血淸蛋白質量을 Kjeldahl 및 Biure 方法에 依해 Coleman Model 295 E Spectrophotometer로서 540 nm에서 測定하였으며, 血淸蛋白質의 電基泳動像은 Grassman-Hang (1960)方法에 依하여 barbital buffer(pH 8.6, 이온强度 0.05)로서 分離 測定하였다. 一般的으로 두 實驗群에 있어서 總 血淸蛋白質量은 對照群에 比하여 1日區에서 減少된 後, 2日區에서부터 增加 傾向이 나타나며, 5日區에서 부터는 對照群에 比하여 높은 恒定 持續性을 나타내었고, 한편 Albumin/Globulin 比에 있어서는 對照群에 比하여 1日區에서 增加를 나타내고, 그 後에는 徐徐히 減少하여 5日區에서 부터는 對照群에 比하여 낮은 恒定 持續性을 나타내었다. 特히 血淸蛋白質分劃에서 beta globulin 含量이 實驗期間中 兩群 共히 有意性있는 上昇을 보였다. 一般的으로 低氣壓인 380 mmHg群은 500 mmHg群에 比하여 顯著한 變化相을 가져왔으며, 上記한 低氣壓에 曝露 5日傾부터 馴化現象을 나타내는 것으로 생각된다.

  • PDF

비정질 리본의 ΔE 특성을 이용한 선형 자기센서에 관한 연구 (Study on the Linear Magnetic Field Sensor Using ΔE in Amorphous Ribbon)

  • 박수영;김철기;유권상;김동영
    • 한국자기학회지
    • /
    • 제23권6호
    • /
    • pp.205-208
    • /
    • 2013
  • ${\delta}$E 효과는 재료의 영율(Young's modulus)이 자화 상태에 따라 변화하는 효과를 말한다. 본 연구에서는 두께 $25{\mu}m$, 길이 30 mm의 비정질 리본 2605SC를 폭 3 mm, 5 mm, 8.5 mm로 각각 에칭하여 외부 자기장 세기와 시편의 폭 변화에 따른 영율의 변화를 임피던스 공명 측정을 이용하여 측정하였다. 인가 자기장이 증가함에 따라 영율이 증가하는 것과, 시편의 폭이 넓을수록 시편에 인가되는 유효 자기장이 감소하여 영율이 감소하는 결과를 볼 수 있었고, 단원자 모델로 계산한 결과와 비교적 잘 일치하는 것을 확인하였으며, 외부 자기장 세기에 따라 변화하는 영율(${\delta}$E)의 선형적 변화 영역을 이용한 선형 자기센서 제작 가능성을 확인하였다.

THINNED PIPE MANAGEMENT PROGRAM OF KOREAN NUCLEAR POWER PLANTS

  • Lee, S.H.;Lee, Y.S.;Park, S.K.;Lee, J.G.
    • Corrosion Science and Technology
    • /
    • 제14권1호
    • /
    • pp.1-11
    • /
    • 2015
  • Local wall thinning and integrity degradation caused by several mechanisms, such as flow accelerated corrosion (FAC), cavitation, flashing and/or liquid drop impingements, are a main concern in carbon steel piping systems of nuclear power plant in terms of safety and operability. Thinned pipe management program (TPMP) had been developed and optimized to reduce the possibility of unplanned shutdown and/or power reduction due to pipe failure caused by wall thinning in the secondary side piping system. This program also consists of several technical elements such as prediction of wear rate for each component, prioritization of components for inspection, thickness measurement, calculation of actual wear and wear rate for each component. Decision making is associated with replacement or continuous service for thinned pipe components. Establishment of long-term strategy based on diagnosis of plant condition regarding overall wall thinning is also essential part of the program. Prediction models of wall thinning caused by FAC had been established for 24 operating nuclear plants. Long term strategies to manage the thinned pipe component were prepared and applied to each unit, which was reflecting plant specific design, operation, and inspection history, so that the structural integrity of piping system can be maintained. An alternative integrity assessment criterion and a computer program for thinned piping items were developed for the first time in the world, which was directly applicable to the secondary piping system of nuclear power plant. The thinned pipe management program is applied to all domestic nuclear power plants as a standard procedure form so that it contributes to preventing an accident caused by FAC.

Inner Beam의 두께비 및 높이비가 LMTT용 Shuttle Car의 Frame 강도 및 강성에 미치는 영향 (DThe Effect of Thickness Ratio and Hight Ratio of Inner Beam on Strength and Stiffness of Frame in Shuttle Car for LMTT)

  • 한동섭;한근조;이권순;심재준;김태형
    • 한국항해항만학회지
    • /
    • 제28권3호
    • /
    • pp.207-211
    • /
    • 2004
  • LMTT(Linear Motor-based Transfer Technology)는 항만 자동화를 위한 컨테이너 터미널용 수평 이송 장치이며, rail과 shuttle car(mover)에 부착된 stator module로 구성된 PMLSM(Permanent Magnetic Linear Synchronous Motor)에 의해 구동된다. 본 논문은 inner beam과 outer beam의 높이비가 LMTT용 shuttle car의 frame 강도 및 강성에 미치는 영향을 살펴보았다. 설계변수는 inner beam의 단면형상 및 높이비로 설정하였으며, 유한요소해석을 통하여 설계변수가 frame의 강도 및 강성에 미치는 영향을 살펴보았다.

The Camellia sinensis Inhalation Effects of Pulmonary Structure Protection and Anti-oxidants Enzyme from Cigarette Smoking

  • Kim Sang-Gi;Jung Hyuk;Kim Bo-Ae;Choi Yoong-Suk;Kim Sang-Kook;Choi Gui-Hyang;Park Jong-Seok;Suh Tae-Soo;Kim You-Young
    • 대한의생명과학회지
    • /
    • 제12권3호
    • /
    • pp.281-287
    • /
    • 2006
  • Cigarette smoke causes atypical structure of pulmonary and oxidative damage. Therefore, we carried out to determine if exposure to cigarette smoke alters pulmonary structure and anti-oxidant related enzyme in a animal model, when natural product extracts using by Nebulizer. The rat were divided into four groups: $H_2O-treated$ (Control), natural product (Camellia sinensis) extracts-treated (CS), natural product extracts-treated with cigarette smoke-exposed (CS+SM) and cigarette smoke-expose (SM). All groups are similar to Control group in weight, but SM group is lower than the other groups. Microscopic image of the pulmonary structure in SM group showed deleterious alterations in the morphology, but the other groups are maintained in normal structure. In anti-oxidant related enzymes, SOD (superoxide dismutase) and catalase, SM group represents the lowest enzyme activity among all groups. But G6PD (glucose-6-phosphate dehydrogenase) and LPO (lipid peroxidation) is SM group represents the highest enzyme activity among all groups. These result indicate that the natural product extracts is an efficient tissue protective substance against smoke-induced lung injury.

  • PDF

The effect of young stellar populations in Early-type galaxies

  • 서혜원;정현진;오규석;이석영
    • 천문학회보
    • /
    • 제35권1호
    • /
    • pp.74.1-74.1
    • /
    • 2010
  • We have investigated the radial g-r color gradients of early-type galaxies in the Sloan Digital Sky Survey (SDSS) DR6 in the redshift range 0.00$H{\beta}$ absorption-line strengths and/or emission-line ratios that are indicative of the presence of young stellar populations. This implies that most of the residual star formation in early-type galaxies is centrally concentrated. Blue-cored galaxies are predominantly low-velocity dispersion systems. A simple model shows that the observed positive color gradients are visible only for a billion years after a star formation episode for the typical strength of recent star formation. The observed effective radius decreases and the mean surface brightness increases due to this centrally concentrated star formation episode. As a result, the majority of blue-cored galaxies may lie on different regions in the fundamental plane (FP) from red-cored ellipticals. However, the position of the blue-cored galaxies on the FP cannot be solely attributed to recent star formation but requires substantially lower velocity dispersion. We conclude that a low-level of residual star formation persists at the centers of most of low-mass early-type galaxies, whereas massive ones are mostly quiescent systems with metallicity-driven red cores.

  • PDF

Magnetron PECVD에 의한 DLC 박막의 제작에 관한 연구 (A study on the deposition of DLC films by magnetron PECVD)

  • 김성영;이재성;박진석
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1996년도 하계학술대회 논문집 C
    • /
    • pp.1446-1449
    • /
    • 1996
  • Thin films of diamond-like carbon(DLC) have been deposited using a magnetron plasma-enhanced chemical vapor deposition(PECVD) method with an rf(13.56 MHz) plasma of $C_{3}H_{8}$. From the Langmuir probe I-V characteristics, it can be observed that increasing the magnetic field yields an increase of the temperature($T_e$) and density($N_e$) of electron. At a magnetic field of 82 Gauss, the estimated values of $T_e$ and $N_e$ are approximately $1.5\;{\times}\;10^5$ K(13.5 eV) and $1.3\;{\times}\;10^{11}\;cm^{-3}$, respectively. Such a highly dense plasma can be attributed to the enhanced ionization caused by the cyclotron motion of electrons in the presence of a magnetic field. On the other hand, the negative dc self-bias voltage($-V_{sb}$) decreases with an increasing magnetic field, which is irrespective of gas pressure in the range of $1{\sim}7$ mTorr. This result is well explained by a theoretical model considering the variation of $T_e$. Deposition rates of DLC films increases with a magnetic field. This may be due to the increased mean free path of electrons in the magnetron plasma. Structures of DLC films are examined by using various techniques such as FTIR and Raman spectroscopy. Most of hydrocarbon bonds in DLC films prepared consist of $sp^3$ tetrahedral bonds. Increasing the rf power leads to an enhancement of cross-linking of carbon atoms in DLC films. At approximately 140 W, the maximum film density obtained is about 2.4 $g/cm^3$.

  • PDF

Performance of carbon nanotube-coated steel slag for high concentrations of phosphorus from pig manure

  • Kang, Kyeong Hwan;Kim, Junghyeon;Jeon, Hyeonjin;Kim, Kyoungwoo;Byun, Imgyu
    • Membrane and Water Treatment
    • /
    • 제11권1호
    • /
    • pp.59-68
    • /
    • 2020
  • The study objective was to evaluate the enhanced removal of high concentrations of phosphorus from synthetic wastewater (solely phosphorus-containing) and real wastewater (pig manure) by using carbon nanotube (CNT)-coated steel slag. Generally, phosphorus removal by steel slag is attributed to Ca2+ eluted from the slag. However, in this study, CNT was used to control the excess release of Ca2+ from steel slag and increase the phosphorus removal. The phosphorus removal rate by the uncoated steel slag was lower than that of the CNT-coated steel slag, even though the Ca2+ concentrations were higher in the solution containing the uncoated steel slag. Therefore, the phosphorus removal could be attributed to both precipitation with Ca2+ eluted from steel slag in aqueous solution and adsorption onto the surface of the CNT-coated steel slag. Furthermore, the protons released from the CNT surface by exchanging with divalent cations acted to reduce the pH increase of the solution, which is attributed to the OH- eluted from the steel slag. The adsorption isotherm and kinetics of the CNT-coated steel slags followed the Freundlich isotherm and pseudo-second-order model, respectively. The maximum adsorption capacity of the uncoated and CNT-coated steel slags was 6.127 and 9.268 mg P g-1 slag, respectively. In addition, phosphorus from pig manure was more effectively removed by the CNT-coated steel slag than by the uncoated slag. Over 24 hours, the PO4-P removal in pig manure was 12.3% higher by the CNT-coated slag. This CNT-coated steel slag can be used to remove both phosphorus and metals and has potential applications in high phosphorus-containing wastewater like pig manure.

Relationship between the Methane Production and the CNCPS Carbohydrate Fractions of Rations with Various Concentrate/roughage Ratios Evaluated Using In vitro Incubation Technique

  • Dong, Ruilan;Zhao, Guangyong
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제26권12호
    • /
    • pp.1708-1716
    • /
    • 2013
  • The objective of the trial was to study the relationship between the methane ($CH_4$) production and the Cornell Net Carbohydrate and Protein System (CNCPS) carbohydrate fractions of feeds for cattle and the suitability of CNCPS carbohydrate fractions as the dietary variables in modeling the $CH_4$ production in rumen fermentation. Forty-five rations for cattle with the concentrate/roughage ratios of 10:90, 20:80, 30:70, 40:60, and 50:50 were formulated as feed samples. The Menke and Steingass's gas test was used for the measurement of $CH_4$ production. The feed samples were incubated for 48 h and the $CH_4$ production was analyzed using gas chromatography. Statistical analysis indicated that the $CH_4$ production (mL) was closely correlated with the CNCPS carbohydrate fractions (g), i.e. CA (sugars); $CB_1$ (starch and pectin); $CB_2$ (available cell wall) in a multiple linear pattern: $CH_4=(89.16{\pm}14.93)$ $CA+(124.10{\pm}13.90)$ $CB_1+(30.58{\pm}11.72)$ $CB_2+(3.28{\pm}7.19)$, $R^2=0.81$, p<0.0001, n = 45. Validation of the model using 10 rations indicated that the $CH_4$ production of the rations for cattle could accurately be predicted based on the CNCPS carbohydrate fractions. The trial indicated that the CNCPS carbohydrate fractions CA, $CB_1$ and $CB_2$ were suitable dietary variables for predicting the $CH_4$ production in rumen fermentation in vitro.

Side Population Cell Level in Human Breast Cancer and Factors Related to Disease-free Survival

  • Jin, C.G.;Zou, T.N.;Li, J.;Chen, X.Q.;Liu, X.;Wang, Y.Y.;Wang, X.;Che, Y.H.;Wang, X.C.;Sriplung, Hutcha
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제16권3호
    • /
    • pp.991-996
    • /
    • 2015
  • Side population (SP) cells have stem cell-like properties with a capacity for self-renewal and are resistant to chemotherapy and radiotherapy. Therefore the presence of SP cells in human breast cancer probably has prognostic value. Objective: To investigate the characteristics of SP cells and identify the relationship between the SP cells levels and clinico-pathological parameters of the breast tumor and disease-free survival (DFS) in breast cancer patients. Materials and Methods: A total of 122 eligible breast cancer patients were consecutively recruited from January 1, 2006 to December 31, 2007 at Yunnan Tumor Hospital. All eligible subjects received conventional treatment and were followed up for seven years. Predictors of recurrence and/or metastasis and DFS were analyzed using Cox regression analysis. Human breast cancer cells were also obtained from fresh human breast cancer tissue and cultured by the nucleic acid dye Hoechst33342 with Verapami. Flow cytometry (FCM) was employed to isolate the cells of SP and non-SP types. Results: In this study, SP cells were identified using flow cytometric analysis with Hoechst 33342 dye efflux. Adjusted for age, tumor size, lymph nodal status, histological grade, the Cox model showed a higher risk of recurrence and/or metastasis positively associated with the SP cell level (1.75, 1.02-2.98), as well as with axillary lymph node metastasis (2.99, 1.76-5.09), pathology invasiveness type (1.7, 1.14-2.55), and tumor volume doubling time (TVDT) (1.54, 1.01-2.36). Conclusions: The SP cell level is independently associated with tumor progression and clinical outcome after controlling for other pathological factors. The axillary lymph node status, TVDT and the status of non-invasive or invasive tumor independently predict the prognosis of breast cancer.