• Journal of Magnetics
• /
• v.11 no.3
• /
• pp.139-142
• /
• 2006

We fabricated new one-dimensional magnetophotonic crystal (1D-MPC) utilizing the second and third photonic band gaps where localized modes existed. Structure of the 1D-MPC was $(Ta_{2}O_{5}/SiO_{2})_{5}/Bi:YIG/(SiO_{2}/Ta_{2}O_{5})_{5}$ with optical thicknesses of 3$\lambda$ /4 for $Ta_{2}O_{5} and $SiO_2$ dielectric layers and $\lambda$ /2 for Bi:YIG defect layer, where $\lambda$ is a wavelength of a localized mode in the second photonic band gap. Faraday rotation at the localized mode in the second photonic band gap was enhanced, which was confirmed by calculation using 4${\times}$4 matrix method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.197-198
• /
• 2008

이 논문에서는 다양한 SiNx의 band gap을 이용하여 MIS 구조의 메모리 소자를 제작하고 이를 분석하였다. SiNx 박막은 증착 가스비에 따라 다양한 band gap을 가지게 된다. 본 실험에서는 $SiH_4$ 가스와 $NH_3$ 가스를 사용하여 SiNx 박막을 증착하였다. n-type 단결정 실리콘 기판위에 다양한 가스비에 따라 단일 SiNx 박막을 증착 및 분석하였고, 이를 이용하여 NNN 구조의 MIS 소자를 제작하였다. 제작된 소자는 4.6 V의 hysteresis roof 폭과 1000 초 후에 84.8 %의 retention 값을 갖는 우수한 메모리 특성을 보였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.2
• /
• pp.347-353
• /
• 2018

In this paper, we studied a design method for a band-pass waveguide filter with a modified H-type resonant iris (RI) placed in a thin transverse wall of a rectangular waveguide. The horizontal straight gap at the center of a conventional H-shaped iris is modified to a U-shaped one to increase the equivalent capacitance, and the equivalent inductance is improved by changing the vertical two straight slots into C-shaped ones. From some simulation results for the frequency response of the proposed RI, it was observed that the proposed iris was advantageous for reducing its size and having better cutoff, compared to typical H-shaped one. Equivalent inductance, capacitance, and quality factor of the proposed RI were extracted to analyze its performance. A third-order band pass filter using the proposed modified H-shaped iris was designed and, it was observed that the filter operated in the frequency range of 9.18-9.84 GHz with its insertion loss of 0.3 dB and return loss of 14 dB.

• Korean Journal of Materials Research
• /
• v.19 no.10
• /
• pp.522-526
• /
• 2009

Graphene has been effectively synthesized on Ni/SiO$_2$/Si substrates with CH$_4$ (1 SCCM) diluted in Ar/H$_2$(10%) (99 SCCM) by using an inductively-coupled plasma-enhanced chemical vapor deposition. Graphene was formed on the entire surface of the 500 nm thick Ni substrate even at 700 $^{\circ}C$, although CH$_4$ and Ar/H$_2$ gas were supplied under plasma of 600 W for 1 second. The Raman spectrum showed typical graphene features with D, G, and 2D peaks at 1356, 1584, and 2710 cm$^{-1}$, respectively. With increase of growth temperature to 900 $^{\circ}C$, the ratios of the D band intensity to the G band intensity and the 2D band intensity to the G band intensity were increased and decreased, respectively. The results were strongly correlated to a rougher and coarser Ni surface due to the enhanced recrystallization process at higher temperatures. In contrast, highquality graphene was synthesized at 1000 $^{\circ}C$ on smooth and large Ni grains, which were formed by decreasing Ni deposition thickness to 300 nm.

• Journal of Advanced Navigation Technology
• /
• v.10 no.4
• /
• pp.342-347
• /
• 2006

In this paper, we have designed 800[MHz] broad band antenna that is improves a narrow bandwidth problem of microstrip antenna and it will be able to integrate GSM, TRS band including the CDMA band. It had L-shaped feeding structure and added the U-slot it used a duplex resonance effect. Also for the improvement of profit the stack it did with the perpendicular. It seems to be good quality that design and manufactured antenna frequency bandwidth(VSWR 2:1) is 789~1086[MHz] with 297[MHz](33%). Also the E-plan and H-plan all profit 9.4[dBi] above, 3[dB] beam width was visible the quality which above $61^{\circ}$ is improved.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.7 no.2
• /
• pp.71-77
• /
• 1982

This poper proposes the method of the balanced-mixer realization in the X-Band frequency range by the MIC coplanar magic-tee. This magic-tee is composed with microstrip and slot, as suggested by Ronde. The characteristics of balancing and isolation in this magic-tee is more preferable to those of the rat-race or hybrid ring in the wide frequency range. So, experimentally in this paper the characteristics of the MIC balanced-mixed are obtained with the VSWR less than 1, 2(in Local and Signal Arms) and the Conversion Loss, 6 dB in that frequency range, when the mixer is designed in the 3rd order (in E-arm) and 2nd order(in H-arm) Chebyshev matching networks, and with two symmetrical Schottkey Barrier Diodes.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.219-222
• /
• 2006

In this paper, we have designed 800MHz band broadband antenna which is improves of microstrip antenna narrow bandwidth problem including the CDMA band and be able to integrated the GSM and TRS band will design. It used the duplex resonance effect it had the L-Shaped feeding structure which adds the u-slot. It was measured that the frequency bandwidth of the designed antenna which is planed $897MHz\sim1013MHz$ with 215MHz(23.8%). And the antenna gain is 9.3dBi, 3dB beam width $60^{\circ}$ in both the E-plane and H-plane.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.6
• /
• pp.998-1002
• /
• 2006

In this paper, we have designed 800MHz band broadband antenna which is improves of microstrip antenna narrow bandwidth problem including the CDMA band and be able to integrated the GSM and TRS band will design. It used the duplex resonance effect it had the L-Shaped feeding structure which adds the u-slot. It was measured that the frequency bandwidth of the designed antenna which is planed $897MHz\sim1013MHz$ with 215MHz(23.8%). And the antenna gain is 9.3dBi, 3dB beam width $60^{\circ}$ in both the E-plane and H-plane.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.6 no.1
• /
• pp.213-221
• /
• 2002

This paper presents the experimental result of Reinforced Concrete column-steel beam joint connected by Band Plates(BP). Main parameters in the test are the shape of BP and thickness of plate. Ten interior and exterior RC column-steel beam joint specimens are designed. Cyclic loads are applied to the beam end of eight specimens (four interior specimens and four exterior specimens). To evaluate the cyclic effect, monotonic loads are acted for two specimens. All specimen showed similar failure pattern such as the plate of BP get torn after the large deformation. Even though the specimen with double cross type BP has lower strength than the specimen with single cross type BP, the energy dissipation capacity of the specimen turned out high. Thus, provided the strength of joint with double cross type to be designed to have suitable strength by increasing the thickness of plate, the joint system may show higher seismic capacity.

• The Bulletin of The Korean Astronomical Society
• /
• v.45 no.1
• /
• pp.34.2-34.2
• /
• 2020

Reverberation mapping is one of the best ways to investigate the physical mechanism of broad-line regions around central supermassive black holes of active galactic nuclei (AGNs). It is usually used to estimate the masses of supermassive black holes. Although spectroscopic reverberation mapping has used to study dozens of AGN, spectroscopic monitoring campaign of large sample is expansive. Here, we present results of photometric reverberation mapping with medium-band photometry. We monitored five nearby AGN which were already studied with H-alpha emission line. Observation has been performed for ~3 months with ~3 days cadence using three medium-band filters installed in LSGT (Lee Sang Gak Telescope; 0.43m). We found 0.01-0.08 magnitude variations from differential photometry. Also time-lags between continuum light-curves and H-alpha emission line light-curves are found using JAVELIN software. The result shows that our study and previous studies are consistent within uncertainty range. In the near future, medium-band photometric reverberation mapping seems useful to study large AGN samples. We will present preliminary result of following study that report new time lag measurement of six AGNs in the similar way.