• Korean Journal of Materials Research
• /
• v.10 no.9
• /
• pp.648-655
• /
• 2000

Synthesis of the crystalline film was investigated under the diamond growth condition with altering the addition of the nitrogen from 0% to 95%. With increasing the nitrogen concentration, surface morphology of the film was changed from the diamond film with {100} growth plane to the non-faceted diamond film with nano-scale grains. It also showed that the deposition of the diamond film could be synthesized using only methane and nitrogen gases without hydrogen gas. Separated particles with diamond structure showed an octahedral shaped I the nitrogen ranges between 30% and 80%, and newly formed hexagonal crystals are observed when substrate temperature with diamond structure, however, also identify that the hexagonal crystal was SiCN composite composed of Si, C and N atoms.

• Journal of the Korean Vacuum Society
• /
• v.20 no.4
• /
• pp.252-257
• /
• 2011

The ring formation and electronic properties of furan adsorbed on graphene layers grown on 6H-SiC (0001) has been investigated using atomic force microscopy (AFM), near edge X-ray absorption fine structure (NEXAFS) spectra for the C K-edge, and core level photoemission spectroscopy (CLPES). Moreover, we observed that furan molecules adsorbed on graphene could be used for chemical functionalization via the lone pair electrons of the oxygen group, allowing chemical doping. We also found that furan spontaneously form rings with one of three different bonding configurations and the electronic properties of the ring formed by furan on graphene can be described using by AFM, NEXAFS and CLPES, respectively.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.1
• /
• pp.23-29
• /
• 2016

Zinc oxide of hexagonal wurzite, is known as n-type semiconductor. It has a wide band gap energy of 3.37 eV and large exciton binding energy of 60 meV. It can be widely applied to gas sensors, laser diodes, dye-sensitized solar cells and degradation of dye waste. The use of microwave hydrothermal synthesis brings a rapid reaction rate, high yield, and energy saving. Amine additives control the different particle shapes because of the chelate effect and formation of hydroxide ion. In this study, zinc nitrate hexahydrate was used as zinc precursor. In addition, ethanolamine, ethylenediamine, diethylenetriamine, and hexamethylenetetramine are used as shape control agent. The pH value was controlled as 11 by NaOH. The shapes of zinc oxide are star-like, rod, flower-like, and circular cone. In order to analyze physical, chemical, and optical properties of ZnO with diverse amine additives, we used XRD, SEM, EDS, FT-IR, UV-Vis spectroscopy, and PL spectroscopy.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.18 no.1
• /
• pp.10-14
• /
• 2008

We synthesized GaN nanowires with high quality using the vapor phase epitaxy technique. The GaN nanowires were obtained at a temperature of $950^{\circ}C$. The Ar and $NH_3$ flow rates were 1000 sccm and 50 sccm, respectively. The shape of the GaN nanowires was confirmed through FESEM analysis. We were able to conclude that the GaN nanowires synthesized via vapor-solid (VLS) mechanism when the source was closed to the substrate. On the other side, the VS mechanism changed to vapor-liquid-solid (VLS) as the source and the substrate became more distant. Therefore, we can suggest that the large amount of Ga source from initial growth interrupt the role of catalyst on the substrate.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.3
• /
• pp.95-100
• /
• 2016

In this work, tin oxides were obtained by the liquid reduction precipitation method and hydrothermal process using $SnCl_2{\cdot}2H_2O$, $N_2H_4$, and NaOH. Tin oxide crystals having different sizes and morphologies could be achieved. The powders were characterized by X-ray diffraction (XRD) and Field Emission Scanning Electron Microscopy (FE-SEM). Depending on the molar ratio of the raw materials, tin oxide crystalline with the spherical and rectangular plate-like shape could be obtained, the crystal phase was SnO and $Sn_6O_4(OH)_4$. And the obtained SnO crystals by a hydrothermal reaction showed various shapes, such as, spherical, plate-like and flower-like architectures depending on the temperature conditions.

• Korean Journal of Microbiology
• /
• v.32 no.2
• /
• pp.97-101
• /
• 1994

Fifteen strains of the nitrogen fixer Axospirillum were isolated from the rhizosphere of rice collected from Kyonggi-do and Chungcheongnam in Korea. They had strong acetylene-reducing activity of 400 of 900 nmol $C_2H_4$ per hour vial had a similar morphology in succinate-malate medium: vibrioid cells having a diameter of 1.0 ${\mu}m$ and a monopolar single flagellum in liquid media. According to their physiological and morphological characteristics, they were divided into two distinct groups, group I and group II. Group I strain were, unlike group II, distinguished by their ability to use glucose as a sole carbon source in nitrogen-free medium, requirement for biotin, and formation of wider, longer, and S-shaped cells in semisolid nitrogen-free malate medium. On the basis of their characteristics, strains belonging to group I were identified as Azospirillum lipoferum, while those belonging to group II were identified as Azospirillum brasilense.

• Applied Chemistry for Engineering
• /
• v.25 no.1
• /
• pp.47-52
• /
• 2014

A series of liquid crystalline polyesters containing X-shaped mesogenic groups in main chain were synthesized through the solution polymerization of 2,5-di(4-substituted benzoate)hydroquinones and 4,4'-dicarboxy-1,8-diphenoxyoctane. The structures and properties of synthesized polymers were investigated by $^1H$-NMR, FT-IR, differential scanning calorimetry (DSC), thermogravimetry analysis (TGA), polarized optical microscopy (POM) and wide angel X-ray diffraction (WXRD). Inherent viscosities (${\eta}_{inh}$) of polymers were measured between 0.35 and 0.66 dL/g in 1,1,2,2-tetrachloroethane, and they were easily soluble in most of organic solvents used for this experiment. All polymers revealed relatively low melting transition temperature ($T_m$) and crystallinity, and also showed thermotropic nematic liquid crystallinity when they were heated to their melting temperatures. These properties of polymers were presumably due to the presence of the bulky substituting groups on the hydroquinone unit in mesogenic group.

• Journal of Advanced Navigation Technology
• /
• v.23 no.1
• /
• pp.69-76
• /
• 2019

In this paper, a design method for an enhanced-sensitivity microwave sensor based on microstrip defected ground structure was studied for the permittivity measurement of planar dielectric substrates. The proposed sensor was designed by modifying the ridge structure of an H-shaped aperture into the shape of a capacitor symbol. The sensitivity of the proposed sensor was compared with that of a conventional sensor based on a double-ring complementary split ring resonator(DR-CSRR). Two sensors were designed and fabricated on a 0.76-mm-thick RF-35 substrate so that the transmission coefficient would resonate at 1.5 GHz in the absence of the substrate under test. Five types of taconic substrates with a relative permittivity ranging from 2.17 to 10.2 were selected asthe substrate under test. Experiment results show that the sensitivity of the proposed sensor, which is measured by the shift in the resonant frequency of the transmission coefficient, is 1.31 to 1.62 times higher than that of the conventional DR-CSRR-based sensor.

• Journal of the Korean Chemical Society
• /
• v.23 no.5
• /
• pp.320-324
• /
• 1979

Purple membrane from Halobacterium halobium was incorporated into 7.5% polyacrylamide gels. Absorption and circular dichroic spectra of purple membrane incorporated with gels were obtained at various pH. The spectra of these gels measured at pH 7.0 were essentially identical with those obtained in the aqueous suspension of purple membrane. Acid titration of the gels showed the transition to a form absorbing at 605nm $(bR_{605}^{acid}$) at pH 2.6, and to a second form at 565nm $(bR_{565}^{acid})$ at pH 0.8. Dark-adapted gels showed an isosbestic point for each transition whereas light-adapted gels did not. Visible CD spectra of $bR_{570}^{LA},\;bR_{305}^{acid}\;and\;bR_{565}^{acid}$ all showed the typical bilobed pattern. CD spectra measured at UV wavelength region were also independent of the variation of pH in terms of molar ellipticity and spectral shape. The protonated species $bR_{605}^{acid}$ may be one of the intermediates formed during the normal photochemical cycle of purple membrane. Most probably, the species $bR_{605}^{acid}$ is considered to be $O^{640}$ in the cycle.

• Food Science of Animal Resources
• /
• v.33 no.6
• /
• pp.757-762
• /
• 2013

This study was conducted to develop a processing method for dry-curing beef ham with Korean traditional sauces and to investigate the quality properties of the dry-cured beef hams. Semitendinosus muscle from Hanwoo was spread with sundried salt (C), sun-dried salt mixed with red pepper paste (T1), and sun-dried salt mixed with soybean paste (T2), and inserted into washed Hanwoo large intestine. It was then dried and fermented for 75 d. Moisture contents of the hams were 46-48%, without any significant differences. T1 showed the lowest pH among the three dry-cured hams, while water holding capacity (WHC) of T2 was found the lowest (p<0.05). In mechanical color determination, C showed higher CIE $a^*$ and CIE $b^*$ than T1 and T2 (p<0.05), however CIE $L^*$ did not show any significant difference. In texture, T1 demonstrated significantly lower springiness than C (p<0.05). The sensory properties of all dry-cured hams did not show any significant difference, but T1 indicated a higher taste, saltiness and overall acceptability than others, whereas C gathered the highest score in color and flavor. In conclusion, the dry-curing by combination of sun-dried salt mixed with red pepper sauce (T1) showed higher quality properties of the Hanwoo dry-cured ham.