• International Journal of Automotive Technology
• /
• 제7권7호
• /
• pp.777-784
• /
• 2006

The lateral dynamic behaviours of a track inspection vehicle with laterally guided system are studied for the safety and comfort. A 10-DOF dynamic model is proposed counting for lateral and yaw motions. The equations for motions of the vehicle running on curved tracks at a constant speed are presented. It is shown by simulation that lateral guiding forces applied to the guiding wheels on the inner side of the track increase in a larger scale in comparison with those on the outer side when the vehicle passes through curved tracks with cant, and the front guiding spring forces is larger than the rears. Lateral vibrations due to yaw motions of the vehicle take place when the vehicle runs through curved tracks. Finally, effect of the lateral guidance on the vehicle dynamics is also examined and advantages of such a guiding system are discussed in some details. An optimal guided control is applied to restrain the lateral and yaw motions. The comparisons between the active and passive guidance explain the effect of the active control approaches.

• 한국항공우주학회지
• /
• 제31권8호
• /
• pp.50-57
• /
• 2003

헬리콥터를 공간상에서 비교적 가까운 거리에 불규칙하게 주어진 여러 경로점을 따라 비행하는 것은 아주 실제적인 임무인데 이러한 임무에서 최적의 경로를 찾는 것은 어려운 문제에 속한다. 역제어나 직접법을 사용하는 전통적 접근은, 역제어의 경우에는 전 구간의 경로를 시간의 함수로 미리 설정해야 한다거나, 직접법의 경우 계산시간이 너무 많이 소요 된다는 등의 제약으로 그 활용성이 제한적이었다. 본 논문에서는 최적제어기법을 적용하여 다중경로점이 주어진 문제에 대해 최적경로를 구하는 알고리듬을 개발하고 이를 이용하여 slalom 운동과 전체적으로 곡선이 경로에서 일부구간만 선형으로 주어지는 문제 등에 있어서의 헬리콥터의 최적경로를 구하고 그 효용성을 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.361-362
• /
• 2007

This paper presents the Traffic information system that based on an embedded WinCE board which has GPS and HSDPA. This system is able to overcome the limit of area using the Internet service which other systems can't provide. When the embedded board receives data about the geometric and vehicle speed information, it transmits to the server via HSDPA/the Internet. The server receives and processes it for the path services. And also we present the path guidance algorithm which is based on the speed information. These algorithm responses to the dynamical traffic condition through updating traffic information. Especially, we suggest a Traffic Status Variable in each branch which represents each road's traffic status. This Traffic Status Variable contains speed, road grade; we separate the road three groups as speed limitation; and past speed data - for example, week day rush hour of each road. In addition, the data of cross about left-turn or right-turn can update. Those elements is consisted Traffic Status Variable.

• 한국정보관리학회:학술대회논문집
• /
• 한국정보관리학회 1998년도 제5회 학술대회 논문집
• /
• pp.115-118
• /
• 1998

This article introduces definition and theoretical background of the managing records for ISO 9000 compliance, especially, quality record management and describes the method of establishing efficient system for the control of quality records in engineering corporation. To establish the best control system of quality records, the organization must not only understand ISO Code requirements for quality record completely but also identify the documents to be controlled as a quality records correctly. This will provide the guidance which need to establish the system for quality control to the organization which produces documents in accordance with ISO Code requirements.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.1349-1354
• /
• 1990

This paper deals with the control of autonomous vehicle in the production systems. Presently, there is a significant interest in autonomous vehicles which are capable of intelligent motion (and action) without requiring a guide track to follow. This paper describes a PI-F adaptive control algorithm, which is used to drive an experimental autonomous vehicle along a given trajectory. The simulation results characterizing the accuracy og the algorithm are presented.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1187-1190
• /
• 2004

This paper presents a traveler guidance system that offers 3D street information such as road types, signal light systems, street trees, buildings, etc. We consider 5x4 road system of Gangnam(in Seoul, Korea) as a test area and reflect the traveler's car-driving situation. A web server is constructed to serve traveler's driving path by switching 3D animation scenes automatically. To do batch processing of geometric data for the 3D graphical streets construction, we have extracted major street information from present GIS database and created new GIS file formats (SMF files), which contain data sessions for links, nodes, and facilities. With these files, we can render 3D navigation scenes. A number of vector calculations were performed for the geometrical consistence and texture-mapping method was used for the realistic scene generation. Finally, we have verified the effectiveness of the service by operating a test scenario. We have checked whether traveler's 2D path and 3D navigation are exactly reported after setting specific departure and destination. This system offers us well awareness of streets and takes useful role of traveler guidance.

• 한국건설관리학회논문집
• /
• 제21권1호
• /
• pp.78-86
• /
• 2020

도저는 고가의 건설장비로서 건설토공현장 정지작업에서 커다란 영향을 가져온다. 이러한 중요성에 따라서 머신 가이던스 시스템이 도저에 적용되어 토공 정지작업의 성과를 올리기 위한 노력이 진행되고 있다. 머신 가이던스 시스템은 정지작업 시 장비기사에게 정지작업에 필요한 굴삭깊이, 경사각도 등 정보를 제공하며, 장비기사는 제공되는 정보를 이용하여 측량기사의 도움을 최소화 하면서 정지작업을 진행할 수 있다. 이와 같이 머신 가이던스 시스템은 장비기사가 계획도면 상의 계획고에 맞추어 정지작업을 수행할 수 있도록 돕는 기능을 제공한다. 본 논문의 목적은 머신 가이던스 시스템이 기존 토공 정지작업과 비교하여 토공 정지작업에 가져오는 성과향상을 분석하는 것이다. 성과분석은 1) 생산성과 2) 정확도 2가지 관점에서 수행됐다. 여기서 생산성은 단위시간에 도출되는 작업량을 나타내며, 정확도는 계획도면에서 요구하는 계획고에서 벗어나는 정도를 나타낸다. 본 연구목적을 달성하기 위해 도저 머신 가이던스 시스템을 테스트 현장에 적용했으며, 적용결과 머신 가이던스 시스템이 전통적인 방법과 비교하여 생산성의 경우 46.59%, 정확도의 경우 46.96%만큼 증가되는 성과향상을 확인할 수 있었다.

• Journal of Electrical Engineering and Technology
• /
• 제10권2호
• /
• pp.647-652
• /
• 2015

A fully coupled finite element analysis (FEA) technique was developed for analyzing the discharge phenomena and dielectric liquid flow while considering surface charge density effects in dielectric flow guidance. In addition, the simulated speed of surface charge propagation was compared and verified with the experimental results shown in the literature. Recently, electrohydrodynamics (EHD) techniques have been widely applied to enhance the cooling performance of electromagnetic systems by utilizing gaseous or liquid media. The main advantage of EHD techniques is the non-contact and low-noise nature of smart control using an electric field. In some cases, flow can be achieved using only a main electric field source. The driving sources in EHD flow are ionization in the breakdown region and ionic dissociation in the sub-breakdown region. Dielectric guidance can be used to enhance the speed of discharge propagation and fluidic flow along the direction of the electric field. To analyze this EHD phenomenon, in this study, the fully coupled FEA was composed of Poisson's equation for an electric field, charge continuity equations in the form of the Nernst-Planck equation for ions, and the Navier-Stokes equation for an incompressible fluidic flow. To develop a generalized numerical technique for various EHD phenomena that considers fluidic flow effects including dielectric flow guidance, we examined the surface charge accumulation on a dielectric surface and ionization, dissociation, and recombination effects.

• Journal of Pharmaceutical Investigation
• /
• 제35권3호
• /
• pp.207-224
• /
• 2005

The objective of this study was to explore the principles of SUPAC-SS and its regulatory application in handling postapproval changes to nonsterile semisolid dosage forms. The types of postapproval changes that SUPAC-SS described were modifications in formulation (components and composition), batch size, manufacturing equipment & process, and the site of manufacturing. SUPAC-SS defined the levels of postapproval changes and what chemistry, manufacturing, and control tests should be conducted for each change level. The guidance also specified several occasions the manufacturers should perform in vitro release test (Franz cell diffusion test) and/or in vivo bioequivalence test. Finally, SUPAC-SS classified appropriate filing forms to be used in supporting postapproval changes. It was crystal clear that SUPAC-SS helped maintain the safety and quality of approved semisolid dosage forms when they were subject to certain postapproval changes. The availability of SUPAC-SS made contributions to reducing regulatory burdens of the industry, as well as expediting the postapproval process of regulatory agencies. This study also shed light on the background of relevant pharmaceutical sciences that the SUPAC-SS guidance adopted. Finally, the KFDA and the industry were strongly urged to implant a similar guidance in handling postapproval changes to semisolid dosage forms available in the Korean marketplace.

• 한국응급구조학회지
• /
• 제25권1호
• /
• pp.223-234
• /
• 2021

Purpose: The purpose of the study is to check up the status of 119 emergency control centers usage. Therefore, the status of use of 119 emergency control centers and the incidence of pre-hospital cardiac arrest patients were investigated. Methods: The emergency activity daily reports and first aid diaries of 119 emergency control centers from January to December 2018 were reviewed. For more accurate status analysis, Among the first aid guidance received in the emergency rescue standard system, the cardiopulmonary resuscitation guide log was reviewed. Results: In 2018, the total usage of the 119 emergency control centers was 1,358,356 calls, hospital guidance werethe most commom (n=629,676, 46.4%), followed by first aid (n=428,027, 31.5%), disease consultation (n=170,238, 12.5%), medical oversight (n=111,188, 8.2%), and interhospital transfer (n=5,052, 0.4%). Regarding the user number per 1,000 persons, Jeju was the greatest at 48.0, whereas Changwon was the lowest at 13.0. A total number of dispatcher-assisted cardiopulmonary resuscitation was 12.181. The time from report to chest compression were 156.2±80.8 seconds for those with previous cardiopulmonary resuscitation training and 168.0±79.3 seconds for those without such training (p<.05). Conclusion: The ratio of first aid instructions, including dispatcher-assisted cardiopulmonary resuscitation, among total usage of the 119 emergency control centers increased. Therefore, additional efforts are required to improve the quality and expertise of information provided through the 119 emergency control centers.