• Journal of the Korean Vacuum Society
• /
• v.5 no.3
• /
• pp.199-205
• /
• 1996

InGaAs eqitaxial layers have been selectively grown on patterned GaAs(100) substrates by chemical beam epitaxy (CBE) using triethylgallium (TEGa), trimethylindium (TMIn), and unprecracked monoethylarsine (MEAs). Facet growth of InGaAs epilayers has also been investigated at the various growth temperatures and Si4N4 dielectric pattern directions. In [011] jirection of mask, the change from (311), (377) and (111) facets to (311) facet with increasing growth temperature was observed. In [011] direction, however, the change from (011) and (111) facets to (111) facet with increasing growth temperature was observed. These results are attributed to the sidewall growth caused by different surface migration lengths of reactants. The formation of U-shaped (100) top surface is also discussed in terms of dangling bond model.

• The Journal of Asian Finance, Economics and Business
• /
• v.6 no.4
• /
• pp.129-137
• /
• 2019

Tax can be categorised into direct tax and indirect tax. This paper uses the ordinary least-squares regression method to study the impact of direct and indirect tax on economic growth in Vietnam in the period 2003-2017. Statistical data is collected from the Ministry of Finance of Vietnam. Theoretically, tax generates the state budget revenue and is a tool to regulate the economy. The results of statistical tests show that tax has a positive impact on Vietnam's economic growth. However, the effects of direct tax and indirect tax are different. The indirect tax has a positive influence and promote Vietnam's economic growth, while the impact of the direct tax is invisible. There has not been sufficient evidence to confirm that the indirect tax has a more positive impact than the direct tax. To promote economic growth, Vietnam needs to restructure its tax system towards: (1) Increasing the proportion of indirect tax, reducing the proportion of direct tax in the state budget revenue; (2) Expanding tax bases; (3) Reducing tax rates of corporate income tax and personal income tax; (4) Increasing tax rates of environmental protection tax, natural resources tax, value added tax and excise tax on some types of goods which harm health and environment.

• Journal of Ecology and Environment
• /
• v.31 no.4
• /
• pp.261-267
• /
• 2008

Growth and photosynthetic responses of one $C_3$ and two $C_4$ plants in the family Chenopodiaceae in three $CO_2$ concentration $([CO_2])$ conditions-low (about $243{\mu}mol\;mol^{-1}$, LC), present (about 378, PC), and high (about 465, HC)-were investigated in open top chambers. The relative growth rate (RGR) and net assimilation rate in the $C_3$ plant, Chenopodium album, increased with increasing $[CO_2]$, though the RGR was not enhanced significantly in the HC condition. The leaf area ratio and leaf weight ratio of the $C_3$ plant drastically decreased with increasing $[CO_2]$, suggesting that the $C_3$ plant invests more biomass to leaves in lower $[CO_2]$ conditions. The two $C_4$ plants, Atriplex glauca and A. lentiformis, showed relatively small changes in those growth parameters. These photosynthetic-pathway-dependent responses suggest that growth patterns of $C_3$ and $C_4$ plants have been altered by past increases in atmospheric $[CO_2]$ but that there will be relatively little further alteration in the future high-$CO_2$ world.

• Journal of Power System Engineering
• /
• v.18 no.1
• /
• pp.91-98
• /
• 2014

In this investigation, the effect of crack orientation on spatial randomness of fatigue crack growth rate (FCGR) in friction stir welded (FSWed) 7075-T651 aluminum alloy joints has been statistically analyzed by Weibull distribution. The fatigue crack growth tests are conducted under three different constant stress intensity factor range (SIFR) control at room temperature with R = 0.1 and frequency 10Hz on compact tension (CT) specimen machined at base metal (BM) and weld metal (WM). The experimental fatigue crack growth rate data were obtained for two types of specimens having LT and TL orientations. LT specimens both base metal and weld metal showed higher fatigue crack growth rate as compared to TL specimens. In the lower SIFR region, FCGR were found to be almost 3 times higher in higher SIFR region. The shape parameter of Weibull both LT and TL orientation for FCGR was increased with increasing SIFR, the scale parameter was also increased with increasing SIFR. The smallest value of the shape parameter was shown in weld metal specimens having LT orientation at lower SIFR region.

• Korean Journal of Pharmacognosy
• /
• v.18 no.1
• /
• pp.34-40
• /
• 1987

Onion extracts were tested for effects on the growth and lactic acid production of Lactobacillus bulgaricus in the medium containing mercury. The media containing mercury were added with onion extracts and inoculated with the bacterium and then incubated at $39^{\circ}$ for four days. All of the onion extracts examined increased the growth and lactic acid production of the bacterium in the medium containing mercury. At the addition of the edible portion extract of onion to the medium containing 5 ppm, 10 ppm and 20 ppm mercury, the higher the concentration of the onion extract was added, the greater the increasing effect on the growth and lactic acid production. The brown peel extract of onion increased the growth and lactic acid production of the bacterium in the medium containing mercury at all concentrations. The higher the concentration of the extract added, the more effective the increasing effect. The onion solutions of edible portion and brown peel extracted at $90^{\circ}\;to\;100^{\circ}$ showed more desirable effects than those extracted at the room temperature. Among four kinds of the onion extracts, the brown peel solution extracted at $90^{\circ}\;to\;100^{\circ}$ was the most effective in increase of the growth and lactic acid production in the medium containing mercury.

• Journal of the Korean institute of surface engineering
• /
• v.36 no.3
• /
• pp.234-241
• /
• 2003

SiC nanorod was synthesized directly on Si substrate using hexamethyldisilabutane and Fe catalyst with (111) direction. Fe acted a liquid catalyst at growth condition. Grown SiC nanorod has about 30nm diameter and $5{\mu}m$ length. SiC nanorod growth was divided by trro regions with diameter distribution. This diameter distribution were occurred by surface deposition at as - grown nanorod's surface by limitation of growth rate. At higher temperature, these division not occurred. Growth temperature and flow rates affected diameter and morphology of nanorods. With increasing flow rate of source gas, nanorod's diameter increased because of deactivation effect. Case of the increasing temperature, growth rate increased so deactivation did not occurred.

• Journal of Korean Society for Quality Management
• /
• v.23 no.1
• /
• pp.95-105
• /
• 1995

The error structure of nonlinearized technological growth models, such as, the Pearl curve, the Gompertz curve and the Wei bull growth curve, has zero mean and a constant variance over time. Transformed models, however, like the linearized Fisher-Pry model. the linearized Gompertz growth curve, and the linearized Weibull growth curve have increasing variance from t = 0 to the inflection point.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.7 no.2
• /
• pp.117-120
• /
• 2002

The effect of cell density on cell growth was investigated in a suspension batch culture of hybridoma cells. The specific growth rate was found to increase with increasing initial cell density and then to decrease with further increases in initial cell density. In order to quantitatively describe the dependence of specific growth rate on cell density, a kinetic model is proposed, which satisfactorily represents the experimental data.

• Journal of Powder Materials
• /
• v.29 no.2
• /
• pp.110-117
• /
• 2022

The grain growth behavior in the (1-x)K_0.5Na_0.5NbO₃-xCaZrO₃ (KNNCZ-x) system is studied as a function of the amount of CZ and grain shape. The (1-x)K_0.5Na_0.5NbO₃-xCaZrO₃ (KNNCZ-x) powders are synthesized using a conventional solid-state reaction method. A single orthorhombic phase is observed at x = 0 - 0.03. However, rhombohedral and orthorhombic phases are observed at x = 0.05. The grain growth behavior changes from abnormal grain growth to the suppression of grain growth as the amount of CaZrO₃ (CZ) increases. With increasing CZ content, grains become more faceted, and the step-free energy increases. Therefore, the critical growth driving force increases. The grain size distribution broadens with increasing sintering time in KNNCZ-0.05. As a result, some large grains with a driving force larger than the critical driving force for growth exhibit abnormal grain growth behavior during sintering. Therefore, CZ changes the grain growth behavior and microstructure of KNN. Grain growth at the faceted interface of the KNNCZ system occurs via two-dimensional nucleation and growth.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.3
• /
• pp.107-115
• /
• 2009

Particular interest in the role of convection in vapor crystal growth has arisen since some single crystals under high gravity acceleration of $10g_0$ appear considerably larger than those under normal gravity acceleration ($1g_0$). For both ${\Delta}T=60\;K$ and 90 K, the mass flux increases by a factor of 3 with increasing the gravity acceleration from $1g_0$ up to $10g_0$. On the other hand, for ${\Delta}T=30\;K$, the flux is increased by a factor of 1.36 for the range of $1g_0{\leq}g{\leq}10g_0$. The maximum growth rates for $1g_0$, $4g_0$, $10g_0$ appear approximately in the neighborhood of y = 0.5, and the growth rates shows asymmetrical patterns, which indicate the occurrence of either one single or more than one convective cell. The maximum growth rate for $10g_0$ is nearly greater than that for $1g_0$ by a factor of 2.0 at $P_B=20\;Torr$. For three different gravity levels of $1g_0$, $4g_0$ and $10g_0$, the maximum growth rates are greater than the minimum rates by a factor of nearly 3.0, based on $P_B=20\;Torr$. The mass flux increases with increasing the gravity acceleration, for $1g_0{\leq}g_y{\leq}10g_0$, and decreases with increasing the partial pressure of component B, xenon (Xe), $P_B$. The $|U|_{max}$ is directly proportional to the gravity acceleration for $20\;Torr{\leq}P_B{\leq}300\;Torr$. As the partial pressure of $P_B$ (Torr) decreases from 300 Torr to 20 Torr, the slopes of the $|U|_{max}s$ versus the gravity accelerations increase from 0.1 sec to 0.17 sec. The mass flux of $Hg_2Cl_2$ is exponentially decayed with increasing the partial pressure of component B, $P_B$ (Torr) from 20 Torr up to 300 Torr.