• Korean journal of applied entomology
• /
• v.55 no.4
• /
• pp.501-511
• /
• 2016

Predicting potential spatial distribution of Monochamus alternatus, a major insect vector of the pine wilt disease, is essential to the spread of the pine wilt disease. The purpose of this study was to predict future domestic spatial distribution of M. alternatus by using the CLIMEX model considering the temperature condition of the vector's life history. To predict current distribution of M. alternatus, the administrative divisions data where the pine wilt spots caused by M. alternatus were found from 2006 to 2014 and the 10-year mean climate observed data in 68 meteorological stations from 2006 to 2015 were used. Eight parameter sets were chosen based on growth temperature range of M. alternatus reported in preceding researches. Error matrix method was utilized to select and simulate the parameter sets showing the highest correlation with the actual distribution. Regarding the future distribution of M. alternatus, two periods of 2050s(2046-2055) and 2090s(2091-2100) were predicted using the projected climate data of RCP 8.5 Scenario generated from Korea Meteorological Administration. Overall results of M. alternatus distribution simulation were fit in the actual distribution; however, overestimation in Seoul Metropolitan area and Chungnam Region were shown. Gradual expansion of M. alternatus would be expected to nationwide from western and southern coastal areas of Korea peninsula.

• Journal of the Microelectronics and Packaging Society
• /
• v.8 no.3
• /
• pp.37-42
• /
• 2001

The concerns of the toxicity and health hazard of lead in solders have demanded the research to find suitable lead-free solder alloys. It was discussed that effect of the intermetallic formation and structure on the reliability of solder joints. In this study, lead-free solder alloys with compositions of Sn/3.5Ag/0.75Cu, Sn/2.0Ag/0.5Cu/2.0Bi were applied to the 48 $\mu$BGA packages. Also, the lead-free solder alloys compared with eutectic Sn/37Pb solder using shear test under various aging temperature. Common $\mu$BGA with solder components was aged at $130^{\circ}C$, $150^{\circ}C$ and $170^{\circ}C$. And the each temperature applied to 300, 600 and 900 hours. The thickness of the intermetallics was measured for each condition and the activation energy for their growth was computed. The fracture surfaces were analyzed using SEM (Scanning Electron Microscope) with EDS (Energy Dispersive Spectroscopy). These results for reliability of lead-free interconnections are discussed.

• Korean Journal of Environment and Ecology
• /
• v.29 no.6
• /
• pp.873-883
• /
• 2015

From August 2012 to April 2013, the ichthyofauna and post-restoration properties of Yangjae stream were investigated. A total of 1,503 fish of 2 forms, 16 species and 5 families were studied during the survey period. A survey of the distribution of freshwater fish inhabiting Yangjae stream after restoration of the stream showed large populations of Zacco platypus and Rhynchocypris oxycephalus. From the frequency distribution of the total length for the Zacco platypus population inhabiting Yangjae stream, it was estimated that there are 4 distinct age groups, with an abundance of the 27-63 mm (Age $0^+$) category accounting for 51.3% of the population. The regression coefficient (b) for the length-weight relationship in Zacco platypus was 3.27, while the slope of the condition factor was positive, demonstrating that stable growth conditions are being maintained. Analysis of tolerance and trophic guilds showed a decrease in the numbers of sensitive species and insectivore species further downstream, and an increase in tolerant species and omnivore species. Principal component analysis using community indices and indices of biotic integrity (IBI) showed that there were differences according to the survey time: the first and second surveys showed major changes on certain single species populations while during the third survey, it was analyzed that the populations of various types of fish had established balance.

• Korean Business Review
• /
• v.18 no.1
• /
• pp.59-79
• /
• 2005

recently, world is progressing large quantity consumption with continuous Innovation and economic growth and pollution is accelerated at these process. Increase of industry activity and service that is point of corporation activity is discharging environmental pollutants at whole process to manufacture of end product and exhaust process from acquisition of raw material for accompanied product production hereupon. At the same time, being promoting resources consumption by that use much raw material, As a result, is becoming obstacle factors in sustainable development. So, corporation's responsibility for environmental protection is emphasized. Corporation which must prepare in green round or environmental problems should consider environmental effects that is happened over whole life of products that include waste treatment after raw material acquisition and use as well as selling end product simply. A Life Cycle Assessment techniques is normalized and standardized in International Standard Organization for technical committee 207(TC 207) world widely, and effort to apply in corporation's activity because mastering LCA techniques in domestic several corporations is undergone actively. Coming into effect of Kyoto's Protocol and International Organization for Standard 14000 series revision are presenting new survival principle in competition between country or corporation. LCA technique may become very useful means to corporation which wish to attempt environment management in real condition that awareness for environment is important. Also, An LCA to each product is going to cause big effects in corporation's whole image as well as competitive power raising for single product. Therefore, this research wishes to examine some instances for the future competitive product development at the estimation of environmental friendliness using LCA techniques and more theoretical considerations of the LCA techniques that can dominate corporation's fate.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.4
• /
• pp.431-438
• /
• 2016

Recently, Both rapid economic growth and high-quality native finishing materials demand in buildings such as local infrastructure facilities and cultural facilities have increased along with local quarries. So, increasing local quarries and environmental pollution occurred in quarries get the eyes to damaged area of the surroundings. As an example, carcinogen such as solid formed to fixing asbestos and dust have damaged to local resident. Especially, Radon gas released from asbestos can exist everywhere on earth, released soil and rock as radioactive substances, can be caused lung cancer followed by a smoking. When pollution source to indoor air quality that lacking ventilation rate of the residential building moved in a cycle, human responses such as headache, dizziness, etc. get appear, so on it threatened resident's physical condition. Thus, we need to urgent attention to reduction harmful substance. In the case of radon gas of the pollution source to indoor air quality in housing, it has characteristic that keep on going through half-life released from source, we need to control radon gas source than source removal. We set on vermiculite addition ratio to 10% which has harmful substances adsorption performance, proceed experiment to basalt waste rock addition ratio 50, 60, 70, 80(%). The result of an experiment, based on 'KS F 4035, precast terrazzo', we can be obtainable in the best terrazzo at basalt waste rock addition ratio 70%.

• Journal of the Korean Electrochemical Society
• /
• v.6 no.3
• /
• pp.196-202
• /
• 2003

We investigated the effect of both 4 types additives and $0.5wt\%\;Pb_3O_4$ which have been reported to show an improvement on the performance of Zinc anode. And Experimental methods such as corrosion potential measurement, potentiodynamic polorization test and charging-discharging cycle life test were carried out in $40 wt\%$ KOH with $Pb_3O_4(0.5, \;10\;&\;2.0wt\%)$ and 4 types additives $(0.4wt\%\;of\;Ca(OH)_2$, 0.025M of Citrate, Tartrate and Gluconate). Corrosion potential was shifted to high direction and also changed to high and low direction repeatedly with increasing of $Pb_3O_4$ quantity. However by adding $0.5wt\%\;Pb_3O_4$, corrosion potential shifted to low direction and showed stable condition. Furthermore it was well known that corrosion resistance was predominantly increased compared to no addition and improved charging-discharging property with adding additives. By SEM analysis, it was concluded that the morphology of surface in case of only $0.5wt\%\;Pb_3O_4$ addition was nearly the same as that of Tartrate additive and in the other additives such as $Ca(OH)_2$, Citrate, Tartrate and Gluconate, their morphologies showed dendrite growth. Eventually it was thought that the additive of Tartrate indicated comparatively good corrosion resistance effect as well as charging-discharging property improvement among those four types additives.

• The korean journal of orthodontics
• /
• v.39 no.3
• /
• pp.185-198
• /
• 2009

Tooth anklylosis is defined as the adhesion state of alveolar bone to dentin or cementum. Trauma, disturbed metabolic disease, and congenital disease have been given as etiologic factors. Complications of tooth ankylosis are tipping of the neighboring teeth, space loss, and supraeruption of the opposing teeth. Particularly if dental ankylosis occurs in maxillary incisors of a growing child, the ankylosed tooth can not move vertically with subsequent disturbance in vertical growth of the alveolar process. With an appropriate treatment approach, an esthetic condition must be achieved especially in the maxillary anterior region. In this report, two cases are presented which were treated by the surgical repositioning method. One is treated by alveolar bone distraction osteogenesis which used a tooth-borne type distraction device and the other by single tooth osteotomy.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.13 no.3
• /
• pp.247-250
• /
• 1984

As a consecutive work on stability for the quality of ginseng products, the sorption properties of red ginseng (RG), red ginseng powder (RGP), and red ginseng powder tablet (RGPT) were studied in order to set the optimum moisture level for them. The levels of moisture at BET monolayer of RGP and RGPT ranged 5.97 to 7.27 % and 4.73 to 5.14 % in wet basis, respectively. Based on these values, the optimum moisture content for both of them would preferably be set at $6.7{\pm}0.7%$ and $4.9{\pm}0.2%$. From the results of storage study on microorganism growth under the maltreated condition, $40^{\circ}C$, and 75% RH, the optimum level of moisture for RG could be extended up to $14.0{\pm}0.5%$, which is much higher than the circulating values of 10.416%.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.4
• /
• pp.526-532
• /
• 2012

This study was conducted to investigate chemical properties of wild $Lactuca$ $indica$ (WL) and cultivated $Lactuca$ $indica$ (CL). The proximate composition, reducing sugar, free amino acids, organic acid, vitamin C, minerals, chlorophyll, and crude saponin were analyzed. WL and CL contained high levels of carbohydrate. The leaves and roots of CL contained higher levels of free amino acid than those of WL. Especially, the proline content of CL leaf was 12 times higher than that of WL leaf, and the arginine content of CL root was 100 times higher than that of WL root. The major organic acid and mineral of $Lactuca$ $indica$ were tartaric acid and potassium, respectively. CL showed significantly higher value of reducing sugar than WL. The vitamin C content of the samples ranged from 0.4 to 24.1 mg%, and CL leaf was the highest amount of vitamin C among the samples. CL leaf had a higher amount of chlorophyll than WL leaf, but WL root contained a higher amount of crude saponin than CL root. As in this study, CL showed better nutritional properties than WL, and these results will provide fundamental data in order to activate the cultivation of wild plants.

• Korean journal of applied entomology
• /
• v.21 no.2 s.51
• /
• pp.61-67
• /
• 1982

The strawberry cultivar Hokowase showing rapid wilting and death around harvest time was first found in the fold at Woongcheon, Chungnam province in 1974. The fungus, Fusarium oxysporum was isolated frequently from the crown, petiole and root of strawberry plants collected from Woongcheon and was pathogenic to Hokowase. The fungus abundantly produced micro-and macro-conidia and chiamydospore on PSA. The size of micro conidia, macro conidia and Chlamydospores was $5.0\~13.0\times2.5\~3.0,\;12.8\~62.5\times2.5\times50\mu\;and\;7.5\~13.8\times5.5\~12.5\mu$, respectively. Mycelial growth of the fungus was best between $25\~30^{\circ}C$ on PSA. The disease at Woongcheon occurred from the end of March and incidence of the disease increased from the beginning of May reaching $40.2\%$ of diseased Plants at the 1st part of June. In laboratory and field evaluation tests with twelve fungicides, Difolatan, Benlate T and Tospin M showed some control effects against the disease although they did not show ignificant differences in effects compared with that of the non-treatment. The cultivar Yachiyo, Daehak 1, Line 10-2, and Senga Sengana were highly resistant, and Harunoka and Empire were moderate resistant whereas Northwest and Hokowase were highly susceptible to the fungus under field condition.