• Journal of the Korean Ceramic Society
• /
• v.41 no.2
• /
• pp.131-135
• /
• 2004

The effect of Co additive on the microstructural evolusion of WC was investigated. A small amount of Co powder was placed on the top-center of the pure WC powder compact and then sintered at 1950$^{\circ}C$. During sintering some abnormally large WC grains of different size and shape observed depending on the distance from the liquid source. However, in the region far away from Co liquid source, it showed low densification and the grains of WC were very small and uniform in size. A small amount of Co liquid phase has a remarkable influence on the AGG of WC and it has been explained in terms of 2-D nucleation and growth mechanism.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1378-1383
• /
• 2003

Synthesis of carbon nanofibers on a metal substrate by an ethylene fueled inverse diffusion flame was illustrated. Stainless steel plates were used for the catalytic metal substrate. The effects of radial distance and residence time of the substrate were investigated. The role of hydrocarbon composition in the fuel was also viewed. Nanofibers with a diameter range of 30-70 nm were found on the substrate. The carbon nanofibers were formed and grown in the region from 4 to 5.5 mm from the central axis of a flame outside of the visible flame front in the radial direction. The minimum residence time required for the formation of carbon nanofibers were about 20 seconds, and over 60 seconds were required for the full-scale growth. The characteristic time of the formation of carbon nanofibers was much shorter than that of the substrate temperature growth. In this study, the variation in hydrocarbon composition had no significant effect on the formation and growth of the carbon nanofibers.

• Korean Journal of Materials Research
• /
• v.25 no.12
• /
• pp.690-693
• /
• 2015

Fatigue crack growth experiments were carried out on a 304 L stainless steel compact-tension(CT) specimen under load control mode. Neutron diffraction was employed to quantitatively measure the residual strains/stresses and the evolution of stress fields in the vicinity of a propagating fatigue-crack tip. Three principal stress components (i.e. crack growth, crack opening, and through-thickness direction stresses) were examined in-situ under loading as a function of distance from the crack tip along the crack-propagation path. The stress/strain fields, measured both at the mid-thickness and near the surface of the CT specimen, were compared. The results show that much higher compressive residual stress fields developed in front of the crack tip near the surface than developed at the mid-thickness area. The change of the stresses ahead of the crack tip under loading is more significant at the mid-thickness area than it is near the surface.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.292-297
• /
• 2001

Composite patch repair of cracked aircraft structures has been accepted as one of improving fatigue life and attaining better structural integrity. Analysis for the stress intensity factor at the skin/stiffener structure with inclined central crack repaired by composite stiffened panels are developed. A numerical investigation was conducted to characterize the fracture behavior and crack growth behavior. In order to investigate the crack growth direction, maximum tangential stress(MTS) criteria is used. The main objective of this research is the validation of the inclined crack patching design. In this paper, the reduction of stress intensity factors at the crack-tip and prediction of crack growth direction are determined to evaluate the effects of various non-dimensional design parameter including; composite patch thickness and stiffener distance. The research on cracked structure subjected to mixed mode loading is accomplished and it is evident that more work using different approaches is necessary.

• Proceedings of the Turfgrass Society of Korea Conference
• /
• 2011.02a
• /
• pp.35-35
• /
• 2011

A large patch disease caused by Rhizoctonia solani AG2-2(IV) is a serious problem in turfgrass sites including golf courses and sports fields in Korea. The objectives of this study were to isolate some antagonistic microorganisms and to explain some involving mechanisms. Initially single colonies which were formed from the filtrates of various soil samples were obtained from LB culture and then co-cultured with R.solani AG2-2(IV) on PDA plate to explore some antagonistic microbes against for large patch fungus, Rhizoctonia solani AG2-2(IV). Out of total 82 antagonistic isolates which commonly had inhibition effect on Rhizoctonia solani AG2-2(IV) mycelial growth, one candidate (YPIN22) showed the most antifungal effect, which was confirmed by the longest distance from the edge of bacterial colony to the mycelial edge of the Rhizoctonia solani AG2-2(IV) in the dual culture. A succeeding investigation was to test any potential effect of the isolate on growth inhibition of 5 other turfgrass pathogens including R. solani solani AG2-2(IIIB), P. ultimum, C. caudatum, C. lunata, and F.oxysporum. Preliminary result indicated that the new isolate YPIN22 was also found to have antagonistic potential on the growth inhibition of those turfgrass pathogenic fungi, which was explained by inhibition zones ranging from 8 to 22mm. A further explanation of some characteristics of the isolate YPIN22 will be discussed in detail.

• YAKHAK HOEJI
• /
• v.50 no.4
• /
• pp.278-286
• /
• 2006

Classical dihydropyrrole[3,4-f]quinazoline antifolates 7,8 and 9, in which the tricyclic ring is structurally similar to the pteridine ring of $CH_2-THF(1)$, the cofactor of thymidylate synthase (TS), were synthesized, and their in vitro antitumor activity was evaluated by measuring the cell growth inhibitory activity against cancer cell lines. The target compounds were cytotoxic against CCRF-CEM, human T-cell acute lymphoblastic leukemia, with the cell growth inhibitory activity $(IC_{50})$ of $0.8{\sim}8.3\;{\mu}M$. Among the three compounds, 3-amino analog 7 was 10- and 3.5-fold more cytotoxic compared to the 3-methyl analogs 8 and 9, and its cytotoxicity was similar to that of the reference compound with the $IC_{50}$ value of $0.83\;{\mu}M$. This result was supposed as the consequence of the fact that dihydropyrroloquinazolinone ring with amino group was able to bind well in the active site of TS. In the case of 3-methyl analogs, analog 9, which has two-carbon bridge between the dihydropyrroloquinazolinone ring and benzoyl-L-glutamic acid, was 3-times more potent in cytotoxicity than analog 8 which has one-carbon bridge, and this result indicates that the distance and conformational orientation of the benzoyl-L-glutamic acid moiety with respect to the tricyclic ring may also be a crucial determinant of cell growth inhibitory activity.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.22 no.5
• /
• pp.1-12
• /
• 2019

It is important to measure the height of trees as an essential element for assessing the forest health in urban areas. Therefore, an automated method that can measure the height of individual tree as a three-dimensional forest information is needed in an extensive and dense forest. Since airborne LiDAR dataset is easy to analyze the tree height(z-coordinate) of forests, studies on individual tree height measurement could be performed as an assessment forest health. Especially in urban forests, that adversely affected by habitat fragmentation and isolation. So this study was analyzed to measure the height of individual trees for assessing the urban forests health, Furthermore to identify environmental factors that affect forest growth. The survey was conducted in the Mt. Bongseo located in Seobuk-gu. Cheonan-si(Middle Chungcheong Province). We segment the individual trees on coniferous by automatic method using the airborne LiDAR dataset of the two periods (year of 2016 and 2017) and to find out individual tree growth. Segmentation of individual trees was performed by using the watershed algorithm and the local maximum, and the tree growth was determined by the difference of the tree height according to the two periods. After we clarify the relationship between the environmental factors affecting the tree growth. The tree growth of Mt. Bongseo was about 20cm for a year, and it was analyzed to be lower than 23.9cm/year of the growth of the dominant species, Pinus rigida. This may have an adverse effect on the growth of isolated urban forests. It also determined different trees growth according to age, diameter and density class in the stock map, effective soil depth and drainage grade in the soil map. There was a statistically significant positive correlation between the distance to the road and the solar radiation as an environmental factor affecting the tree growth. Since there is less correlation, it is necessary to determine other influencing factors affecting tree growth in urban forests besides anthropogenic influences. This study is the first data for the analysis of segmentation and the growth of the individual tree, and it can be used as a scientific data of the urban forest health assessment and management.

• Journal of the Korean Regional Science Association
• /
• v.9 no.1
• /
• pp.45-63
• /
• 1993

University enrollment has long been regarded as one of the major factors inducing population concentration in Seoul and the Capital Region of Korea. Consequently, since early 1980's increases in enrollment and new establishments of extention universities beyond the boundary of Seoul, has been promoted, while university enrollment quota in Seoul has been strictly controlled. The degree of actual population dispersal, however, resulting from such a university enrollment policy has not been empirically tested. This paper aims at: First, identifying the trend of population growth and evolution process of the university enrollment policy in the Capital Region; Second, comparing the degree of influence of university enrollment on population concetration factors; Third, measuring actual effect of the enrollment control on population dispersal out of Seoul and the Capital Region. Major findings are as follows: First, only a week correlation between population and university enrollment growth trends was found; Second, the relative degree of influence on population concentration in the Capital Region, were order, in the order of magnitude, the physical amenity factor, the socio-cultural amenity factor, the employment climate factor and the educational factor. Third, and most improtant, based on the comparison of spatial distribution of graduated high schools and current residence of the selected university students, the gap between the two distributions was revealed and the inter-regional student population movement was estimated. The result shows that in Seoul's case about one-half of and in Kyunggi Province's case about one-fifth of university enrollment size, contributes to population concentration into Seoul. Fourth, as to the universities outside of the Capital Region, little effect in the case of universities located within the commuting distance, and a little effect on population dispersal in the case of universities located beyond commuting distance, were found. In sum, it seems clear that university enrollment policy in the Capital Region, especially in Inchon/Kyunggi Province has not been effective on student population dispersal out of Seoul and the Capital Region. Therefore, it is strongly recommended that university enrollment policy be throughly re-examined from its goal to the implementation means.

• Journal of Korean Society of Transportation
• /
• v.28 no.6
• /
• pp.99-108
• /
• 2010

Due to the recent emergence of global warming concerns, the UN has made the issue of climate change its top priority. Accordingly, Korea has announced a new national master plan titled, 'Participation in global efforts in climate change through -Low Carbon, Green Growth-'. As part of the plan, the constructions of bicycle path networks are being pushed forward. Although the building of bicycle paths and infrastructure is being implemented, little consideration has been given for bicycle path signage. This essay is the study of methodology in the installation of signs on bicycle paths. The research includes a theoretical study of the standard and installation position of signs with consideration of the geometry of bicycles as well issues such as the distance required for the bicyclist to recognize and understand the road sign and to take actions like stopping, In addition, experimental verification of the test results has been carried out. Also, the test on height of signs by changing the installation heights according to a bicyclist's forward vision angle has been conducted.

• Journal of Wetlands Research
• /
• v.7 no.2
• /
• pp.145-158
• /
• 2005

To clarify the growth of Phragmites communis along the distance from the land, and investigate the effects by cutting the aboveground part, the height and dry weight of this species were surveyed from 2000 to 2001 on natural stands at tidal-flat of Hogog-ri, Jugog-myeon, Whaseong-city, Gyeonggi Province. At the stand near the rice paddy, mean density, mean height, dry weight per plant and dry weight per unit area of P. communis were $122.67plants/m^2$, 100.36 cm, 4.241 g, and $537.574/m^2$, respectively. The sizes of P. communis conspicuously increased from seaside to land side. At the stand isolated from the land, these properties were $102.30plants/m^2$ (in density), 43.894 cm (in height), 0.779 g/plant and $73.495g/m^2$, respectively, and the sizes of P. communis at the land side were relatively similar to those at sea side. The cutting of aboveground part resulted to the decrease of density and dry weight per unit area in next year, but did not influence on the height and weight per plant of P. communis.