• Nuclear Engineering and Technology
• /
• v.52 no.6
• /
• pp.1318-1326
• /
• 2020

Structural modification in the electrical cabinet is investigated by a proposed procedure that comprises of an experimental, analytical and numerical solution. This research emphasizes the linear dynamic analysis of the cabinet that is studied under the seismic excitation to demonstrate the real behavior of the cabinets in NPP. To this end, an actual electric cabinet is experimentally tested using an impact hammer test which reveals the fundamental parameters of the cabinet. The Frequency-domain decomposition (FDD) method is used to extract the dynamic properties of the cabinet from the experiment which is then used for numerical modeling. To validate the dynamic properties of the cabinet an analytical solution is suggested. The calibrated model is analyzed under the floor response obtained from the Connecticut nuclear power plant structure excited by Tabas 1978 (Mw 7.4) earthquake. Eventually, the grouping effect of the cabinets is proposed which represents the influence on the dynamic modification. This grouping of the cabinets is described more sophisticatedly by the theoretical understating, which results in a significant change in the seismic response. Considering the grouping effects will be helpful in the assessment of the real seismic behavior, design, and performance of cabinets.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.3A
• /
• pp.293-302
• /
• 2004

Wireless LAN is a rather mature communication technology that connects mobile terminals. A typical wireless LAN system is composed of one AP and more than one terminals, which is called a BSS. Terminals near to an AP can receive high rate data but terminals far from an AP may not receive data with guaranteed high speed rate because received signal strength is weakened. This paper proposes a method to allow high speed data transmission by grouping terminals and using part of wireless terminals as repeaters. We compare and analyze proposed grouping algorithms based on Depth First Search and Breadth First Search via simulations. A grouping algorithm based on Breadth First Search is shown to be more effective in term of efficiency and coverage.

• Nuclear Engineering and Technology
• /
• v.54 no.7
• /
• pp.2418-2426
• /
• 2022

The grouping analysis is a method guided by the Korea Radioactive Waste Agency for efficient analysis of radioactive waste for disposal. In this study, experiments to verify the adequacy of grouping analysis were conducted with radioactive soil, concrete, and dry active waste in similar environments. First, analysis results of the major radionuclide concentrations in individual waste samples were reviewed to evaluate whether wastes from similar environments correspond to a single waste stream. As a result, the soil and concrete waste were identified as a single waste stream because the distribution range of radionuclide concentrations was "within a factor of 10", the range that meet the criterion of the U.S. Nuclear Regulatory Commission for a single waste stream. On the other hand, the dry active waste was judged to correspond to distinct waste streams. Second, after analyzing the composite samples prepared by grouping the individual samples, the population means of the values of "composite sample analysis results/individual sample analysis results" were estimated at a 95% confidence level. The results showed that all evaluation values for soil and concrete waste were within the set reference values (0.1-10) when five-package and ten-package grouping analyses were conducted, verifying the adequacy of the grouping analysis.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.62-63
• /
• 2015

In this paper, to prevent overspending of the CM Fee, Agent CM for the normal work-oriented, Willing to separate order model being used in the construction, using a multi-national grouping Go to offer the right company, a number of groups according to the appropriate CM Fee setting is aimed to suggest a reasonable basis. This paper does not use the domestic point of order characteristic of the model, and using a different theory of affinity grouping projection method is presented. The main disadvantage of the domestic order model because it is a contractual relationship, the contractual relationship as unified as possible by the most reasonable way of construction and construction capabilities and commercialization agreement upon the ability of companies also expect to be very helpful. The grouping by using the multi-order construction of the separation problem of the increase and thus the management object construction type administration was to solve the problem.

• Journal of Internet Computing and Services
• /
• v.6 no.1
• /
• pp.51-64
• /
• 2005

In this paper, we introduce a system for evaluating similarity of C program source code using method which compares syntax-trees each others. This method supposes two characteristic features as against other systems. It is not sensitive for program style such as indentation, white space, and comments, and changing order of control structure like sentences, code block, procedures, and so on. Another is that it can detect a syntax-error cause of using paring technique, We introduce algorithms for similarity evaluation method and grouping method that reduces the number of comparison, In the examination section, we show a test result of program similarity evaluation and its reduced iteration by grouping algorithm.

• Journal of Digital Convergence
• /
• v.10 no.4
• /
• pp.199-206
• /
• 2012

Increment of mobile client's information request in wireless mobile networks requires a new method to manage and serve the streaming media object. This paper proposes a new object segment grouping method for enhancing the performance of streaming media services in wireless mobile networks. The proposed method performs the similarity metric for the partitioned object segments, and it process the disjunction, conjunction, and filtering for these metrics. This paper was to decided the partitioned group of object segments for these operation metrics, and it decided the performance of streaming media services. The simulation result showed that the proposed method has better performance in throughput, average startup latency, and cache hit ratio.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.8
• /
• pp.725-730
• /
• 2013

This paper proposed a novel method for an analysis feature of an Electroencephalogram (EEG) at all channels simultaneously. In a BCI (Brain-Computer Interface) system, EEGs are used to control a machine or computer. The EEG signals were weak to noise and had low spatial resolution because they were acquired by a non-invasive method involving, attaching electrodes along with scalp. This made it difficult to analyze the whole channel of EEG signals. And the previous method could not analyze multiple stimuli, the result being that the BCI system could not react to multiple orders. The method proposed in this paper made it possible analyze multiple-stimuli by grouping the channels. We searched the groups making the largest correlation coefficient summation of every member of the group with a BHS (Binary Harmony Search) algorithm. Then we assumed the EEG signal could be written in linear summation of groups using concentration parameters. In order to verify this assumption, we performed a simulation of three subjects, 60 times per person. From the simulation, we could obtain the groups of EEG signals. We also established the types of stimulus from the concentration coefficient. Consequently, we concluded that the signal could be divided into several groups. Furthermore, we could analyze the EEG in a new way with concentration coefficients from the EEG channel grouping.

• Journal of Digital Contents Society
• /
• v.19 no.1
• /
• pp.199-204
• /
• 2018

In this paper, we propose a fast collision detection method for interacting with objects in virtual space. First, in the mesh grouping step, the entire space is divided into small spaces of a predetermined size, and the positions and sizes of the smallest basic stereoscopic shapes (cube or sphere) including all of the meshes belonging to each small space are determined. In the collision detection step, it is checked whether a haptic interface point (HIP) is included in a three-dimensional figure representing a group. When a collision with a specific three-dimensional figure is confirmed, searching is performed only for the meshes in the group to find a mesh on which a possible real collision with HIP occurred. The effectiveness of the proposed algorithm is verified by measuring and comparing the computation time of the proposed method with and without the proposed method.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.2
• /
• pp.87-95
• /
• 2010

A Vehicular Ad-Hoc Network (VANET) is form of the Mobile Ad-hoc Network (MANET) to provide temporary communication among vehicles via wireless links. In VANET, the vehicle is one of the nodes in networks and communicates with each other. However, the wireless links disconnect very frequently, because vehicles have mobility and move freely. The reason why data accessibility degrades is that disconnection occurs frequently. To improve data accessibility, data replica allocation methods that made group to allocate data replica have proposed in MANET. However, those are not suitable because it is difficult to maintain stable links among the nodes moving fast by centralized group. In this paper, we proposed TBG (Tree Based Grouping) to allocate data replica with the distributed grouping method. Each node has own TBG and allocates data replica based on stability of links to improve data accessibility. The experiment demonstrates that the proposed method outperforms traditional methods in term of data accessibility.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6A
• /
• pp.631-639
• /
• 2004

In this paper, we presented a new interference suppression method based on code grouping and groupwise decorrelation for multirate DS-CDMA downlink. The code grouping is accomplished according to the correlation property between the mother code and the child codes in OVSF code tree. Using groupwise decorrelation, the proposed receiver has relatively low computational complexity and does not require any information about interference users, such as code, data, and amplitude. From the simulation results in multipath channels, the proposed receiver is to provide significant performance enhancement.