• 한국조리학회지
• /
• 제9권1호
• /
• pp.22-38
• /
• 2003

This study divided all cooking-related employees into hotel organization and family restaurant organization, and analyzed the present duties´ characteristics along with an analysis on population statistics. Also, the study examined each employee´s recognition degree of his/her duty in each group and investigated which knowledge and skill they thought as important parts for their developing ability and attaining duties in the future. The collected data tell the followings; with respect to the characteristics of the employees´ duties, the characteristics of hotel employees were different from those of family restaurant employees; in case of hotel employees, the characteristic items recognized at a high level were the importance of duty, independence, self-reliance, the knowledge degree, career, controlling-ship, and development-ship. On the contrary, in case of family restaurant employees, the highly recognized items were complexity of duty, stagnation-ship, and human relationship. Generally, it was clear that family restaurant employees showed more complaints than hotel employees did in the section of recognition degree on the present duties. The imperfect matter is that this study could not specify particulars or details of knowledge and skills that are necessary to make a perfect food-service company. However, this study will become a basis to develop further research on a perfect supposition and detailed particulars by detailed variables in a demonstrative way.

• 한국해양공학회지
• /
• 제18권3호
• /
• pp.8-12
• /
• 2004

The anchor is laid on the seabed, and the main engine is working against incident environmental loads in a typhoon. As the main engine is broken Mum in the storm, the anchor chain is cut and the vessel drifts. Although a ship is moored by two-point mooring lines to maintain her position, it has crashed into a rock because of a typhoon, resulting in a possible accidental oil spillage. In this paper, we studied maintenance of a ship's position, which is analyzed based on the slow motion maneuvering equations considering wave, current, and wind. To estimate wave loads, the direct integration method is employed. The current forces are calculated, using MMG (Mathematical Modeling Group). Th two-point mooring forces are quasi-statistically evaluated, using the catenary equation. Th coefficients of wind forces are modeled from Isherwood's empirical data, and the variation of wind speed is estimated by wind spectrum. The nonlinear motions of a two-point moored ship are simulated, considering wave, current, and wind load, in specific domain of time.

• 한국정밀공학회지
• /
• 제14권5호
• /
• pp.42-52
• /
• 1997

Computer aided process planning and Offline programming are decisive factors in successful implementation of automated robotic production. However, conventional offline programming procedure has proven ineffective due to time-consuming teaching process for robot programming and due to inefficient system modeling. The paper presents an efficient procedure to semi-automatically generate robot job programs for ship block welding applications. In the research, the teaching positions are automatically determined by predefined rules which are functions of the type and the dimensions of the given welding section of ship block. And a sequence of robot movements and welding conditions such as welding type, welding current, welding speed, and welding torch orientation, are determined by use of Standard Program which is experimentally proved to work well for the welding wection group. Finally, a robot program for the welding section is generated automatically. Based on the algorithm, a offline automatic teaching software is developed. The paper presents also the algorithm and structure of the software.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 추계학술대회
• /
• pp.165-167
• /
• 2014

본 논문에서는 선박 내 유선 네트워크에서 차등화 서비스를 지원하기 위해, 기존 RIO (RED In and Out) 방식보다 우수한 패킷 폐기 기술을 제안한다. 제안한 패킷 폐기기술은 개별 플로우별로 관리하지 않고 특정한 기준에 따라 몇 개의 플로우 그룹으로 나누어, 그룹별 관리를 통해서 동일 클래스 내 플로우 간 공평성을 제공한다. 시뮬레이션 결과에서는 RIO 방식보다 링크 이용률은 조금 감소하나, 다중 병목 구간을 경유하는 플로우들이 RIO 방식보다 더 많은 전송률을 보장 받음을 알 수 있다.

• 한국자기학회지
• /
• 제17권6호
• /
• pp.259-264
• /
• 2007

본 논문에서는 모델 함정에 의해 발생하는 정 자기장 신호 특성을 수학적으로 모델링하는 방법에 대해 기술하고 있다. 특정 위치에 설치된 자기센서들에 의해 계측된 자기장 신호 값들로 부터 특이치 분해(singular value decomposition) 방법을 이용한 등가 자기원 다이폴 모델링 기법을 제안하였으며, 제안된 기법의 타당성은 비자성 자기실험실에서 측정된 자기장 값들과의 비교를 통해 성공적으로 검증되었다. 본 논문에서 제안된 기법은 모델 함정 뿐 만 아니라 실 함정에서의 다양한 심도 변화에 따른 정 자기장 신호 분포 특성 예측 시 직접 활용이 가능하다.

• 한국해안·해양공학회논문집
• /
• 제20권2호
• /
• pp.203-211
• /
• 2008

최근 들어 선박의 항로에 위치하고 있는 대형 해상교량의 건설이 활발해짐에 따라 선박충돌의 위험성을 고려하여 교각 주변에 충돌방지공을 설치하는 경우가 많다. 이러한 충돌방지공 설치로 인해 교각의 세굴특성은 충돌방지공 설치 전의 교각 주변의 세굴양상과 매우 다르게 나타난다. 따라서 본 연구에서는 충돌방지공의 설치 유무에 따른 세굴의 형태를 분석하기 위해 인천대교를 대상으로 수리모형실험을 실시하였다. 충돌방지공 설치 전의 고정상, 이동상실험을 통해 유황과 세굴심 및 세굴공 범위를 파악하였으며 또한 충돌방지공 설치 후 실험을 통하여 최종적으로 충돌방지공으로 인한 교각 세굴 특성 변화를 분석하였다. 실험결과, 충돌방지공이 설치됨으로 인해 최대세굴심이 W1교각의 경우 약 0.24 m, W2+3+4교각의 경우 2.4 m 증가하는 것으로 나타났다. 또한 최대세굴심의 발생위치는 W1교각의 경우 충돌방지공 설치 전 후가 동일한 위치에서 발생하였으나 W2+3+4교각의 경우 설치 후 최대세굴심이 교각주변이 아닌 충돌방지공 주변에서 발생하였다.

• 대한조선학회지
• /
• 제24권1호
• /
• pp.35-41
• /
• 1987

An approximate method for calculating added resistance due to regular wave reflection has been established. In order to confirm the applicability of this method, an experimental work was carried out using a Series 60 model with oscillations in the 6-degrees of freedom restricted. Particular attention was paid to the case of the shorter wave length range where the effect of wave reflection is dominant compared to the effects of the ship's motions($\lambda/H=10.6-101.0,\;\lambda/L=0.23-1.18,\;F_n=0.10-0.25$). When comparing the measured and the computed resistance due to wave reflection in a head sea, good agreement is shown. This paper is based on research done by the Author as a member of the Ship Performance Group in the Department of Naval Architecture and Shipbuilding of the University of Newcastle-upon-Tyne in England, under the supervision of Dr. R.L. Townsin.

• 대한조선학회논문집
• /
• 제40권1호
• /
• pp.47-54
• /
• 2003

The majority of small/medium sized shipbuilders in Korea is poor in capital and then, should be restructured as an efficient production system with low investment. Due to considering this situation, the cooperative work system is proposed, in this study, as more effective production system for small/medium sized shipbuilder The cooperative work system Is the production system that many small/medium sized shipbuilders in a group jointly share the common facilities except minimum equipments and have managerial cooperation such as joint purchase of raw materials. The efficiency of cooperative work system is proved from economic and technical point of view with the case study of FRP shipbuilders of Sapjin industrial complex located at Mokpo area.

• 한국항해학회지
• /
• 제11권1호
• /
• pp.107-144
• /
• 1987

In cold season, ice accretion on ship, drift ice, NW winter monsoon, developed extratropical cyclones and associated cold fronts, in warm season, tropical cyclones and dense sea fogs, are encountered very frequently in the North Pacific, especially in the northwest part of it. The two areas, namely, the northwest part of the North Pacific and Burmuda Triangle in the North Atlantic are generally known as most dangerous areas in the world because its high incidence of sea cascualities. In recent years, the small fisherboats operating in the northern seas were frequently sunk in a group as they encountered ice accretion or drift ice. And ocean going vessels were also sunk frequently due to strong winds and very high seas in winter monsoon or developed cyclones and cold fronts. The purpose of this paper is to analyze the real state of heavy weather conditions such as ice accretion on ship drift, ice, typhoons and sea fogs, and also to analyse the effect of these heavy weather phenomena on the vessels at sea, thus helping mariners operate in such heavy weather conditions.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2007년도 춘계학술발표회
• /
• pp.127-132
• /
• 2007

From the 1978 Seasat synthetic aperture radar(SAR) to present systems, spaceborne SAR has demonstrated the capability to image the Earth's ocean and land features over broad areas, day and night, and under most weather conditions. The application of SAR for surveillance of commercial fishing grounds can aid in the detection of illegal fishing activities and provides more efficient use of limited aircraft or patrol craft resources. In the area of vessel traffic monitoring for commercial vessels, Vessel Traffic Service (VTS) which uses the ground-based radar system has some difficulties in detecting moving ships due to the limited detection range of about 10 miles. This paper introduces the field testing results of ship detection by RADARSAT SAR imagery, and proposes a new approach for a Vessel Monitoring System(VMS), including VTS, and SAR combination service.