• Journal of the East Asian Society of Dietary Life
• /
• v.15 no.5
• /
• pp.582-590
• /
• 2005

The application of consomme prepared with different ratios of ground beef and ground chicken to improve taste preferences and the cost of foodstuffs was attempted by reviewing fundamental data and the effect on the sensory and physical characteristics of treatment These treatments were prepared with different ratios(9:1(A), 7:3(B), 5:5(C), 3:7(D), 1:9(E) w/w) of ground beef and ground chicken, respectively. Sensory properties were evaluated in the aspects of both acceptability and intensity. From the acceptability aspect, A treatment showed the highest scores in smell, B in mouthfeel and taste, A and B in color and overall acceptability, respectively. In terms of acceptability, B treatment was favored most for color, mouthfeel, taste and overall acceptability except smell. The more the ground chicken, the higher the intensity aspect E treatment showed higher values than A in all the intensity aspects. Moisture contents and crude proteins increased by increasing the mixed ratio of ground beef, whereas crude ash, solid matter and pH increased by increasing the mixed ratio of ground chicken. Tumidity values were the highest in E treatment, whereas the lowest in A. Tumidity values were increased significantly by increasing the mixed ratio of ground chicken. Viscosity increased by increasing the mixed ratio of ground chicken. The highest viscosity was shown in E treatment The colorimetric lightness values(L) decreased and redness(a), yellowness(b) and total color difference values(AE) increased significantly by increasing the mixed ratio of ground chicken. This experimental study showed that A and B treatment had the highest values in overall acceptability. The results of analysis in crude protein, solid matter, tumidity and viscosity were increased by increasing the mixed ratio of ground chicken. B treatment prepared with a ratio of 7:3 of ground beef and chicken had the most favorable sensory quality. These results suggested the basic information to improve acceptability and to save the costs of Consomme recipes for foodservice institutions.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.5
• /
• pp.575-583
• /
• 2009

Various algorithms and methods, related to preprocessing of LiDAR data, are being developed and proposed. These methods are two ways, one of them is to use the regular form such as DSM or the image converted from raw LiDAR data, and the other is to use raw LiDAR data directly. The image processing method is one of representative method for the regular grid form data. This method is easy to apply to a numerical analysis technique and has an advantage of modeling and noise elimination through smoothing, but it lose the information during the data conversion. This study apply the image processing method to the irregular raw LiDAR data directly for the extracting ground information with minimized information loss and evaluate the extracting accuracy of ground information.

• Journal of information and communication convergence engineering
• /
• v.13 no.3
• /
• pp.205-214
• /
• 2015

In this paper, we propose a new approach to learning a discriminative model for figure/ground segmentation by incorporating the bag-of-features and conditional random field (CRF) techniques. We advocate the use of image patches instead of superpixels as the basic processing unit. The latter has a homogeneous appearance and adheres to object boundaries, while an image patch often contains more discriminative information (e.g., local image structure) to distinguish its categories. We use pixel-level sparse coding to represent an image patch. With the proposed feature representation, the unary classifier achieves a considerable binary segmentation performance. Further, we integrate unary and pairwise potentials into the CRF model to refine the segmentation results. The pairwise potentials include color and texture potentials with neighborhood interactions, and an edge potential. High segmentation accuracy is demonstrated on three benchmark datasets: the Weizmann horse dataset, the VOC2006 cow dataset, and the MSRC multiclass dataset. Extensive experiments show that the proposed approach performs favorably against the state-of-the-art approaches.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.12B
• /
• pp.1175-1182
• /
• 2010

In this paper, we implemented a digital circuit which is targeted on FPGA for estimating azimuth information and distance between aircraft and ground station. All functions for signal processing of TACAN were integrated into a FPGA. The proposed hardware consists of input interface, register file, decoder, signal generator and main controller block. The designed hardware includes a function to generating pulse pair group for azimuth information, a function to responding the interrogation of aircraft for estimating distance between aircraft and ground station, and a function to provide ID information of ground station. The proposed hardware was implemented with FPGA chipset of ALTERA and occupied with 7,071 logic elements.

• Language and Information
• /
• v.14 no.2
• /
• pp.103-129
• /
• 2010

In this paper, I show that anaphora across speakers shows both dynamic and static sides. To capture them all formally, I will adopt semantics based on the assumption that variables range over individual concepts that connect epistemic alternatives. As information increases, a variable can take a different range of possible individual concepts. This is captured by the notion of virtual individual (= vi), a set of individual concepts which are indistinguishable in an information state. The use of a pronoun involves two information states, one for the antecedent, which is always part of the common ground, and the other for the pronoun. Information increase changes vis for variables in the common ground. A pronoun can be used felicitously if there is a unique virtual individual in the information state for the antecedent which does not split in two or more distinctive virtual individuals in the information state for the pronoun. The felicity condition for cross-speaker anaphora can be satisfied in declaratives involving modality, interrogatives and imperatives in a rather less demanding way, because in these cases the utterance does not necessarily require non-trivial personal information for proper use of a pronoun.

• International Journal of Internet, Broadcasting and Communication
• /
• v.10 no.2
• /
• pp.13-18
• /
• 2018

Drones are controlled by the remote pilot from the ground stations using the radio control or autonomously following the pre-programmed flight plans. In this paper, we develop a method and an optimal path search system for providing 3D augmented reality flight (ARF) images for safe and efficient flight control of drones. The developed system consisted of the drone, the ground station and user terminals, and the optimal path search server. We use the Dijkstra algorithm to find the optimal path considering the drone information, flight information, environmental information, and flight mission. We generate a 3D augmented reality flight (ARF) image overlaid with the path information as well as the drone information and the flight information on the flight image received from the drone. The ARF image for adjusting the drone is generated by overlaying route information, drone information, flight information, and the like on the image captured by the drone.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.746-749
• /
• 2002

This paper is introducing a radio control helicopter as a new platform of ground truth measurement. This helicopter is normally used for spraying an agricultural chemical. It can do pinpoint hovering and programing flight using DGPS etc., A spectrometer with dual port can measure ground surface and white reference plate at the same time. And it can also take digital images by digital camera. It is needed to collect ground reflectance information as satellite sensor footprint size for satellite data validation. Generally it is possible to get such ground reflectance by an airplane measurement. But it is high cost and not so easy to make a measurement by airplane. Developed validation system can provide such ground reflectance in low cost and easy.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.11a
• /
• pp.587-590
• /
• 2005

A detailed geothermal characteristics survey with numerical simulations of the heat transfer in a site for ground source heat pump system is necessary for deploying a shallow geothermal utilization system. Density, specific heat, thermal diffusivity, and thermal conductivity are measured on 91 core samples from a 300 m deep borehole in KIGAM(Korea Institute of Geoscience and Mineral Resources). The heat flow is estimated from the thermal gradient and average thermal conductivity and the correlation between fracture system and hydraulic conductivity is analyzed. From the obtained ground information of the study site the performance of the ground heat pump system can be analyzed with some detailed numerical simulations for seasonal heat pump operation skill and optimal system design techniques.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.387-394
• /
• 2007

This study area located in HoNam High-Speed railway soft ground section. So it carried out the boring survey, field survey and test of laboratory. It collected the engineering data of ground and the data for the establishment arrangement. The investigation did a soil investigation in Nonsan. The investigation item excuted seismic piezocone penetration test, s-wave seismic refraction survey, ps logging test, density logging test which is a physical exploration and boring. Eventually, results of geotechnical and shear-wave survey are useful for ground information in soft ground that has identified the characteristics of geological responses and elastic modulus.

• Journal of electromagnetic engineering and science
• /
• v.7 no.2
• /
• pp.96-101
• /
• 2007

A design of circular polarized(CP) microstrip antenna with a fenced ground is proposed and the equivalent circuit is derived. The antenna consists of a square radiating patch with a pair of truncated comers, a bottom ground and a fenced ground. From conducted experiments, a patch size reduction using the metal fence as large as 25% from the conventional patch structure, has been obtained. The input admittance of the extracted equivalent circuit is shown to agree with that of the measurement. And the design parameters and performance of the proposed antenna are examined by analyzing the fields and circuit behaviors.