This study is analyzed based on the statistical data for the effect of Kyoto Protocol which is adopted on 1997. The first greenhouse gas obligation reduction countries such as OECD (Organization for Economic Cooperation and Development), and the first non-obligated developing countries such as China and India, the increasing rate of carbon dioxide emission displayed -10.2% and 88.1% in 2005 with respect to 1990, respectively. This increasing rate is not only shows statistically significant differences but also shows significant meanings when we consider the global increasing rate of carbon dioxide is 29.1%. Changes in the carbon dioxide emissions are also analyzed based on the time of the adaptation of Kyoto Protocol, time of the publication of the second and third reports of IPCC, and withdrawal of the Kyoto Protocol of the United States. Withdrawal of the Kyoto Protocol of the United States is the most significantly affected to the differences in the carbon dioxide emission rates rather than the adaptation of Kyoto Protocol, international agreement on the greenhouse gas reduction, and belief on the scientific evidence for the reasons for increasing carbon dioxide concentrations. Therefore, acceptance of the post-Kyoto Protocol in the United States is very important in order to success as a climate regime.
Journal of the Korean Society of Marine Environment & Safety
/
v.28
no.4
/
pp.639-647
/
2022
The use of flames is essential in cutting, bending, and welding steel during a ship's construction process. While acetylene fuel is commonly used in steel cutting and the manufacturing process in shipyards, the use of propane as an alternative fuel has recently been increasing, due to the lower risk of explosion and propane's relatively low calorific value. However, propane fuel has a relatively slow processing speed and high slag generation frequency, thereby resulting in poor quality. Propylene is another alternative fuel, which has an excellent calorific value. It is expected to gain wider use because of its potential to improve the quality, productivity, and efficiency of steel processing. In this study, the combustion characteristics of propane and propylene fuel during steel plate processing were analyzed and compared. The reduction of greenhouse gases and other harmful gases when using propylene flame was experimentally verified by analyzing the gases emitted during the process. Heat distribution and tensile tests were also performed to investigate the effects of heat input, according to processing fuel used, on the mechanical strength of the marine steel. The results showed that when propylene was used, the temperature was more evenly distributed than when propane fuel was used. Moreover, the mechanical tests showed that when using propylene, there was no decrease in tensile strength, but the strain showed a tendency to decrease. Based on the study results, it is recommended that propylene be used in steel processing and the cutting process in actual shipyards in the future. Additionally, more analysis and supplementary research should be conducted on problems that may occur.
Nam Seok Kim;Young Woon Kim;Yong Woo Hwang;Hong-Yoon Kang;Young Ho Kim
Clean Technology
/
v.30
no.2
/
pp.94-104
/
2024
Remanufacturing re-commercializes a used product to achieve an equal or higher performance level than the original product by disassembling, cleaning, inspecting, repairing, reconditioning, and reassembling the used product. The remanufacturing industry is a key industry necessary to realize carbon neutrality by 2050. This study uses life cycle assessment to analyze the resource reduction and greenhouse gas reduction effects with and without considering the avoided effect for an injector, which is an automobile part that is actively being remanufactured. The results of this study showed that the resource reduction effect and greenhouse gas reduction effect induced by injector remanufacturing were reduced by 95.30% and 93.88%, respectively, based on one unit without considering the avoided effect. However, when considering the avoided effect, which in this case is the environmental impact of not disposing of the used injector and not having to use natural resources to manufacture a new injector because the used injector was reused during remanufacturing, the resource reduction effect and greenhouse gas reduction effect were 190.91% and 188.33%, respectively. The results of this study are expected to be used in the future to evaluate the amount of environmental impact reduction while considering the avoided effect during remanufacturing and to help develop research methodology for remanufacturing.
Jaeyee Choi;JoungDu Shin;HyunJong Cho;Woojin Chung;Sang Beom Lee;Seok In Yun
Journal of the Korea Organic Resources Recycling Association
/
v.32
no.1
/
pp.49-59
/
2024
Biodegradable coating urea plays an important role in reducing the non-pollutants in agroecosystems, maximizing the plant nutrient utilization efficiency and slow-releasing nitrogen. Herein, the objective of this study was to investigate the nitrogen-releasing patterns and greenhouse gas emissions on different biodegradable coating urea. The treatments consisted of the control as an application of chemical fertilizers, NBCF as the non-biodegradable coating urea, NB60, and MDS as biodegradable coating urea. As a result of this study, the maximum accumulated total nitrogen (TN) concentration in the NBCF was higher at 33% than one in the NB60 during the precipitation periods. Its leaching period in the NCBF was prolonged for day 10 compared to the NB60. TN and NO3-N releasing patterns in the NBCF and NB60 were fitted well on linear types(R2≥0.991), but their control and MDS were fitted well on Sigmoid curves(R2≥0.994) with high releasing concentration in the MDS compared to the control during leaching periods. For the greenhouse gas emissions, CH4 emissions in the NBCF, NB60, and MDS were increased at 0.38%, 11.36%, and 5.91%, and N2O emissions were also increased at 50.5%, 32.4%, 58.8% as compared to the control, respectively. Therefore, application of biodegradable polymer coating urea might mitigate the non-point pollutants in agro-ecosystem.
Kang, Youn Ku;Ryou, Young Sun;Kim, Jong Goo;Kim, Young Hwa;Jang, Jae Kyoung
Journal of Bio-Environment Control
/
v.22
no.1
/
pp.19-25
/
2013
In this study, the cooling experiment was carried out in $1,650m^2$ area of the seedling greenhouse from June 6, 2011 to september 18, 2011 with the vertical type geothermal heat pump system of 350 kW scale (175 kW ${\times}$ 2 units) installed in the greenhouse, cooling effects were analyzed and we tried to find more effective operation methods of the geothermal heat pump system. In case of one unit heat pump (175 kW) operation, when evaporator inlet water temperature changed from $13.0^{\circ}C$ to $15.5^{\circ}C$, cooling COP of the system was in 1.1~1.8 range and in case of two unit heat pump (350 kW) operation, when evaporator inlet water temperature changed from 13.0 to 15.5, cooling COP of the system was in 2.0~2.7 range. The accumulated cooling heat quantity of June, July, August and September was 14,718.6, 26,765.1, 28,437.2 and 10,065.0 kWh, respectively.
Effects of the indigenous Vesicular-arbuscular mycurrhizal fungi(VAMF) on early growth response of greenhouse grown crops were experimented. This study was done to evaluate the benefit of indigenous VAMF inoculation on the early growth and the subsequent growth after transplanting of some crops such as cucumber, tomato, hot pepper, eggplant, and melon. Leaf area, shoot dry weight, and plant length of mycorrhizal greenhouse crops showed the tendency of significant or no significant increase over control plants receiving no inoculation. The levels of VA mycorrhizal colonization were increased with plant growth, and infection rates of horticultural crop except hot pepper around one week after transplanting were decreased, while that of 8 weeks after emergence of mycorrhizal seedlings were increased again and infected by around 50% at harvesting time. In spore densities in the rhizosphere soil of craps experimented, the number of spore ranged from $72.7{\pm}26.3$ to $100{\pm}10.3g^1$ on dried soil basis and high density showed in both cucumber and tomato. Total nitrogen contents in shoots were lower in the mycorrhizal plants than non-mycorrhizal one, whereas P uptake in mycorrhizal hot pepper and tomato were highly ramarkable. The K contents in the shoots of mycorrhizal cucumber and eggplent were highly enhanced. Inoculation of the indigenous VAMF enhanced shoot Ca and Mg in both tomoto and melon. The contents of Fe, Zn, Mn and Cu in shoots of mycorrhizal crops were higher than non-mycorrhizal plants and vice versa in case of eggplent. Inoculation of the indigenous VAMF to horticultural crops were effective for alleviation of transplanting shock, and pretransplanting infection improved subsequent growth by reducing the time required for establishment of a functional mycorrhizal symbiosis following transplanting.
To find out reducing way of methane emission from a paddy field monitoring on the greenhouse gases emissions were carried out in the paddy soil with livestock compost and soil conditioner. The seasonal variations of methane emission were high at 36 days and 86 days after rice transplanting, on the other hand those of nitrous oxide emission were high at 64 days after that day. Methane emission by cow compost application, pig compost application and chicken compost application were 331, 282 and 294 kg $ha^{-1}$, respectively. Otherwise, nitrous oxide emissions by cow compost application, pig compost application and chicken compost application were 1.60, 1.78 and 1.78 kg $ha^{-1}$ respectively. The total emission rate of greenhouse gases equivalent to $CO_2$ emission rate (GWP) was 7,447 kg $ha^{-1}$ in cow compost application, 6,474 kg $ha^{-1}$ in pig compost application and 6,726 kg $ha^{-1}$ in chicken compost application. Methane emission by Ca, $SiO_2$ and artificial zeolite application were 373, 264, 239 kg $ha^{-1}$, respectively. The total emission rate of greenhouse gases equivalent to $CO_2$ emission rate (GWP) was 8,295 kg $ha^{-1}$ in Ca application 5,978 kg $ha^{-1}$ in $SiO_2$ application and 5,447 kg $ha^{-1}$ in artificial zeolite application.
Eun Ji Suh;Ok Jae Won;Jae-Sung Park;Won Young Han;Jin Hee Seo;Sun Tae Kim;Hye Rang Park
KOREAN JOURNAL OF CROP SCIENCE
/
v.68
no.2
/
pp.47-58
/
2023
The quality and yield of crops produced using field cultivation are expected to decrease due to the recent global climate change caused by extreme weather. The plant reproductive stage associated with crop yields is a highly vulnerable period to global warming caused by high temperatures. This study analyzed the adzuki bean's yield properties, antioxidant contents, and pollen viability of adzuki bean (Vigna angularis L.) under high-temperature stress and growth periods in a temperature gradient greenhouse that forms 0 to 4℃ above the outside temperatures. As the main variety of red beans cultivated in Korean farms, the "Arari" red bean was grown in the rain shield greenhouse and the temperature gradient greenhouse from 2021 to 2022 in Milyang, Korea. Compared to 2022, it showed a 0 - 1.0℃ lower temperature during the whole growth period in 2021. However, its average temperatures were 0 - 3.7℃ higher in the vegetative stage and 0.4 - 2.4℃ higher in the anthesis stage in 2021. The lowest yield (6.8 ± 0.7 g) was at the highest temperature (T4: low, 23.6℃; average, 28.5℃; high, 35.8℃) during the anthesis stage in 2021. The temperatures of the mature stage were 1.7 - 3.9℃, which were higher in 2022 than in 2021, although the low temperatures of 2022 were lower than in 2021. The yields of the mature stage in 2022 increased more than in 2021 because of the high temperature of the mature stage. The growth and yield were good at 40.5℃ in the vegetative stage. However, growth was poor when the average temperature was 27.0℃ or higher, and yields decreased during the flowering period. Total polyphenol and flavonoid contents were increased, and the pollen viability was 40.75% in the whole growth period at high temperature (T4: low, 22.9℃; average, 28.8℃; high, 36.9℃). These results showed that the antioxidant levels increased when the antioxidant component was affected at higher temperatures than at normal. In contrast, the pollen viability-related yield decreased as the temperature increased. Our results are the basic data for field growers and the breeding of thermos-tolerance in adzuki beans to prepare for the changeable future climate.
We investigated the effects of maternal and paternal parentage, and ovule position in a pod on seed development, weight, and progeny performance, using an annual crop commonly called cowpea (Vigna unguiculata L.). The experiment was conducted in a greenhouse. Nine maternal parents were randomly selected, and 3 individuals were chosen as paternal parents based on the male fitness components. Five types of hand-pollination were attempted on each flower of the maternal plants to evaluate the influence of paternal identify. Independent variables such as parentage and ovule position affected the pattern of seed development. Ovules in the middle position of the pod exhibited a much higher probability of seed maturation than those at the stylar and basal positions, confirming the position effect. These independent variables also appeared to exert a significant effect on seed weight, although it was not possible to evaluate the relative importance of those variables due to a significant interaction between parents. Mixed pollination tended to yield heavier seeds than other paternal parents. Ovules in the middle and basal end positions produced heavier seeds than those at the stylar end regardless of maternal and paternal parentage. Seed weight was independent of all measurements of progeny performance. At week 2 after germination significant paternal effects were found to be mediated through the ovule position in a pod. In particular, the progeny derived from self-pollination performed worse than the progeny from other paternal parentage. The progeny performance at week 4 after germination was affected by maternal parents independently of seed weight. These results show that paternal and maternal effects were quite consistent from the seed development to early growth of the progeny. Consequently, maternal and paternal effects on seed development and weight, and progeny performance may reflect, at least to some extent, genetic contribution of both parents. If so, it is possible for sexual selection on maternal and paternal function to generate the evolution of reproductive traits related to seed production.
Sang-Min Lee;Hee-Chan Lee;Soon-Oh Kwon;Hyo-Jong Song
Journal of the Semiconductor & Display Technology
/
v.23
no.2
/
pp.114-122
/
2024
NF3, Chamber cleaning gas, has a high Global Warming Potential (GWP) of 17,000, causing significant greenhouse effects. Reducing gas usage during the cleaning process is crucial while increasing the cleaning Rate and reducing cleaning standard deviation (Stdev). In a previous study with a 6-inch PECVD chamber, a multiple linear regression analysis showed that Power and Pressure had no significant effect on the cleaning Rate because of their P-values of 0.42 and 0.68. The weight for Flow is 11.55, and the weights for Power and Pressure are 1.4 and 0.7. Due to the limitations of the research equipment, which differed from those used in actual industrial settings, it was challenging to assess the effects in actual industrial environment. Therefore, to show an actual industrial environment, we conducted the cleaning process on a 12-inch PECVD chamber, which is production-level equipment, and quantitatively analyzed the effects of each variable. Power, Pressure, and NF3 Flow all had P-values close to 0, indicating strong statistical significance. The weight for Flow is 15.68, and the weights for Power and Pressure are 4.45 and 5.24, respectively, showing effects 3 and 7 times greater than those with the 6-inch equipment on the cleaning rate. Additionally, we analyzed the cleaning Stdev and derived that there is a trade-off between increasing the cleaning Rate and reducing the cleaning Stdev.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.