• Journal of Korean Society of Industrial and Systems Engineering
• /
• 제20권43호
• /
• pp.211-218
• /
• 1997

Since Industrial Revolution, the sudden industrialization and population explosion have brought about a serious environmental pollution on the air of the earth, the quality of water and the soil, and the greenhouse effect by the destruction of the ozone layer and the greenhouse gas, the organism diversity decline, the desertification by the ruining of woods and the overall global environmental pollution such as the contamination of the ocean and rivers have been come to the front. So the new recognition on the environment is being spreaded in construction business and the efforts for certification acquisition of ISO 14000 being followed by ISO 9000 are progressing, Accordingly, with an example of H Company where integration system is built so that it can minimize the efforts and cost at the construction of the management system, operation and management after the fact, this paper shall suggest the practical scheme of 3 steps through a study to integrate both existing quality management system and new environmental management system. As the integration system of the quality and environment which is constructed by this method is executed, the number of the established and managed document is cut by about a third and so the disorder to encounter between these documents is prevented and unnecessary efforts is reduced in constructing a system, consequently the efficiency of the system is accomplished. Also as the dualization of quality management system and environmental management system additionally needs more men and money after certification acquisition, the non-construction of the integration system may give rise to a cause to aggravate the burden of the company and hereafter when a new system is imported, it may be very difficult to integrate the system. This system integration enables a efficient and effective system to be constructed , operated , and managed after the fact.

• Korean Journal of Soil Science and Fertilizer
• /
• 제46권6호
• /
• pp.665-672
• /
• 2013

This study was conducted to evaluate the effects of a chelating agent on cucumber growth and changes in soil nutrients availability in polytunnel greenhouse fields. Diethylene triamine penta acetic acid (DTPA) was selected as a chelating agent. Two experiments were carried out as follows: i) For field experiment in the autumn season of 2010, each plot was treated by varying the concentration and the number of times being applied with DTPA; [DTPA (0.5 mM, 1 time/3 months), DTPA (0.06 mM, 1 time/1 week), DTPA (0.13 mM, 1 time/2 weeks), DTPA (0.06 mM, 1 time/1 week)+N]. Conventional practice was also investigated. ii) In the spring and summer seasons of 2011, each plot was treated by varying the concentration (0, 0.06, 0.13, 0.19 mM) of DTPA, chemical fertilizers (NPK), and combination of chemical fertilizers and DTPA 0.06 mM. The fruit yields of cucumber and soil chemical properties had no significant differences between treatments. However, in the spring season of 2011, DTPA 0.06 mM plot added 1 time per 2 weeks increased the yield of cucumber, but caused the reduction of yield in next cultivation season. This result showed that excess use of DTPA can cause the damage of crop growth. The inorgainc contents such as Ca and Mg absorbed by cucumber plant had significant differences between DTPA 0.19 mM (2 times/1 week) and fertilizers plus DTPA treatments [DTPA 0.06 mM (2 times/1 week) + 1/2 NPK, DTPA 0.06 mM (2 times/1 week) + NPK]. The input cost of fertilizers was saved when the concentration and the number of times added with DTPA was 0.06 mM and 1 time a week, respectively. This treatment used 67% less of applied fertilizers cost than the plot of conventional practice did. Thus, this research suggested that the application of DTPA 0.06 mM by 1 time a week can be effective for sustainability of crop production and reduction of fertilizers usage in polytunnel greenhouse.

• Journal of Korean Society of Transportation
• /
• 제33권4호
• /
• pp.357-367
• /
• 2015

This study aims to propose integrated management strategies based on the relationship between co-benefits and total benefits of greenhouse gases and air pollutant emissions for establishing a transport and environmental policy. The results show that the integrated management of the following policies: 'Car Free Day' and 'Early Scrapping of Decrepit Diesel Vehicle', which are used for reducing reduce gasoline and diesel, can together reduce both PM and $CO_2$ emissions and increase total benefits. In addition, the integrated management of 'Car Free Day' with environment policies and 'Congestion Charge' with environment policies simultaneously controls the three factors which influence emissions, including travel volume, travel speed and emissions factor, and was found to be effective in terms of co-benefits. This study reduces both air pollutants, which are harmful to health, and greenhouse gas emissions, which influence climate change, and improves the efficiency of policy through the integrated management of policies.

• ETRI Journal
• /
• 제37권2호
• /
• pp.295-305
• /
• 2015

The purpose of this paper is to a develop model for generation expansion planning that can support diverse environmental policies for the reduction of greenhouse gases (GHGs) of South Korea. South Korea is required to reduce its GHG emissions by 30% from the BAU level by 2020. The Wien Automatic System Planning Package currently used in South Korea has limitations in terms of the application of renewable energy policies and GHG targets; this paper proposes the use of an equipment planning model named generation and transmission expansion program, which has been developed to resolve such limitations. For verification of the model, a case study on the 6th Basic Plan of Long-Term Electricity Supply and Demand has been conducted. The results show that for the year 2020 South Korea's annual GHG emissions will be 36.6% more than the GHG Target Management System (GHG TMS) target set for the same year (30%). To achieve the GHG TMS target, the costs involved amount to about 72 trillion KRW (70 billion USD). Consequently, the South Korean government needs to review the performability of this target.

• Journal of Environmental Science International
• /
• 제23권11호
• /
• pp.1881-1888
• /
• 2014

Greenhouse gas (GHG) emissions from dye wastewater treatment processes were estimated by analysing their mass and energy balances, which were then used as baseline information for environmental assessment. The total GHG emissions from dye wastewater treatment plants were divided into direct emissions from the treatment processes and indirect ones from electricity usage. The amounts of $CO_2$, $CH_4$ and $N_2O$ emissions were calculated according to the Intergovernmental Panel on Clime Change (IPCC) guideline for the GHG target management system. For 3 years between 2011 and 2013, direct and indirect emissions were on average 8,742.7 and 7,892.0 Ton.$CO_2eq/year$, respectively, with the former exhibiting 52.6 %. Also, compared to 2012, in 2013, the eco-efficiency indicator by the GHG emissions was found to be more than 1, suggesting that environmental quality was effectively improved.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• 제44권4호
• /
• pp.383-389
• /
• 2011

The negative fishery factors from an environmental perspective are greenhouse gas emissions due to high fossil fuel use, destruction of underwater ecosystems by bottom trawls, a reduction in resources by fishing, and damage to ecosystem diversity. In particular, the greenhouse gas emissions from fisheries is an important issue based on the Cancun meeting in Mexico in 1992 and the Kyoto protocol in 2005. However, no investigations on the GHG emissions from Korean fisheries have been conducted. Therefore, a quantitative analysis of GHG emissions from the Korean fishery industry is needed as a first step to identify a method to reduce GHG emissions from fisheries. The purpose of this study was to investigate the degree of GHG emitted from fisheries. Here, we calculated the GHG emissions from four main Korean fisheries(i.e., large trawls, large purse seines, Danish seines, and bottom pair trawls) using the life cycle assessment(LCA) method. The system boundary and input parameters for each process level were defined for LCA analysis. The fuel use coefficient of each fishery was also calculated. The GHG emissions from edible seafood were calculated considering different consuming areas. The results will be helpful to understand GHG emissions from Korean fisheries.

• Journal of Hydrogen and New Energy
• /
• 제19권6호
• /
• pp.552-560
• /
• 2008

In 1997, Korean government established the National Energy and Resources Plan, which targeted from 1997 to 2005 with strategic energy technology development. At the end of 2005, Korean government built a New National Energy and Resources Plan preparing for upcoming 10 years from 2006 until 2015 based on energy technology trees comparing with the previous plan, which based on the energy R&D projects. In this research, we prioritize the relative preferences and efficiency by an AHP/DEA CCR-I and BCC-I integrated model approach considering scale efficiency for well focused R&D and efficiency of developing Greenhouse Gas technologies as an extended research from a view point of econometrics as an extended research.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• 제48권2호
• /
• pp.200-206
• /
• 2015

The fishing industry has a negative effect on the environment due to greenhouse gas (GHG) emissions with the high use of fossil fuels, the destruction of underwater ecosystems by bottom trawls, reduction in resources by fishing, and altered ecosystem diversity. GHG emissions from fisheries were discussed at the Canc$\acute{u}$n meeting in Mexico in 1992 and are part of the Kyoto protocol in 2005. However, few studies have investigated the GHG emissions from Korean fisheries. To find a way to reduce GHG emissions from fisheries, quantitative analysis of GHG emissions from the Korean fishery industry is needed. Therefore, this study investigated the GHG emissions from the Korean Danish seine fishery using the life cycle assessment (LCA) method. The system boundary and input parameters for each process level are defined for the LCA analysis. The fuel-use coefficient of the fishery is also calculated. The GHG emissions from the representative fish caught by the Danish seine fishery are considered and the GHG emissions for the edible weight of fishes are calculated, considering consumption in different areas and different slaughtering processes. The results will help to understand the GHG emissions from Korean fisheries.

• Advances in environmental research
• /
• 제2권4호
• /
• pp.279-290
• /
• 2013

In this study, a comprehensive model developed to estimate greenhouse gas (GHG) emissions from urban area with low impact development (LID) and its integrated management practices (IMPs). The model was applied to the actual urban area in Asan Tangjeong district (ATD) as a case study. A rainwater tank (1200 ton) among various LID IMPs generated the highest amount of GHG emissions ($3.77{\times}10^5kgCO_2eq$) and led to the utmost reducing effect ($1.49{\times}10^3kgCO_2eq/year$). In the urban area with LID IMPs, annually $1.95{\times}104kgCO_2eq$ of avoided GHG emissions were generated by a reducing effect (e.g., tap water substitution and vegetation $CO_2$ absorption) for a payback period of 162 years. A sensitivity analysis was carried out to quantitatively evaluate the significance of the factors on the overall GHG emissions in ATD, and suggested to plant alternative vegetation on LID IMPs.

• Journal of the Korea Society of Computer and Information
• /
• 제16권2호
• /
• pp.141-151
• /
• 2011

This paper suggests the Facility Management System for plant factory promising to be a core technology of the agriculture in the future. This system makes diagnoses that status from sensors or facilities in the factory for exact operation and monitors the internal environment with the control status in real-time. It is expected that we could operate a plant factory safely and effectively by using the system. The system consists of the data management module, the context provider module, the context interpreter module, the service provider module, the data storage and user interface. The system provide with the failure diagnosis service, the facility control service, and the high-reliability monitoring service via the interactions between above modules. The failure diagnosis service determines whether the sensors or facility devices are in failure or not, and informs the administrator of their conditions. The facility control service is activated in case if the facilities need to be managed during the diagnosis for failure or malfunction processes. The high-reliability monitoring service provides the administrator with verified data through the failure diagnosis service. Then we confirmed that the suggested system operates correctly through the system simulation.