• Korean Chemical Engineering Research
• /
• v.56 no.6
• /
• pp.878-883
• /
• 2018

A circulating fluidized bed (CFB) has been used in various chemical industries because of good heat and mass transfer. In addition, the methanol to olefins (MTO) process requiring the CFB reactor has attracted a great deal of interest due to steep increase of oil price. To design a CFB reactor for MTO pilot process, therefore, we has examined the hydrodynamic properties of spherical catalysts with different particle size and developed a correlation equation to predict catalyst holdup in a riser of CFB reactor. The hydrodynamics of micro-spherical catalysts with average particle size of 53, 90 and 140 mm was evaluated in a $0.025m-ID{\times}4m-high$ CFB riser. We also developed a model described by a decay coefficient to predict solid hold-up distribution in the riser. The decay coefficient developed in this study could be expressed as a function of Froude number and dimensionless velocity ratio. This model could predict well the experimental data obtained from this work.

• Korean Journal of Pharmacognosy
• /
• v.50 no.3
• /
• pp.198-204
• /
• 2019

A facile and convenient method was developed for the mass production of epigallocatechin gallate (EGCG) rich green tea extract (Er-GTE). The Er-GTE was successfully obtained from the crude water extract of green tea by the combination of two step purification, i.e., a simple adsorption process on the cation exchange resins (Trilite SCR-B) followed by the chromatography with Diaion HP-20 resins. The green tea extract produced by water extraction under $45^{\circ}C$ was subjected to adsorb on the strongly acidic cation exchange resin, Trilite SCR-B. The eluate passed through the resin was reabsorbed on Diaion HP-20 resin, which was subjected to elute with a mixture of water and alcohol by conventional chromatographical manner. The EGCG content in Er-GTE was estimated above 97% by HP-LC analysis and the newly developed method was regarded as the most suitable and appropriate process for the mass production of epigallocatechin gallate rich green tea extract (Er-GTE).

• Journal of Distribution Science
• /
• v.21 no.10
• /
• pp.97-107
• /
• 2023

Purpose: The primary objective of the present study is to investigate the contribution of retail beauty workers toward improving 'Green Supply Chain Management' (GSCM) within the beauty sector, and to address the following research inquiry: What are the responsibilities and contributions of retail beauty workers in the promotion and implementation of GSCM practices within the beauty industry? Research design, data, and methodology: The research methodology for this study was employed in investigating the current literature dataset and conducting qualitative literature analysis (Peer-reviewed journal articles and books). This study provides a comprehensive account of the data collection procedure and clear process employed for data analysis. Results: According to the qualitative textual analysis based on comprehensive literature analysis, the crucial aspects of retail beauty workers' contribution to enhancing GSCM within the beauty industry are following: (1) Promote green products, (2) provide green customer education, (3) Provision of environmental friendly services, and (4) Involvement in reducing green waste. Conclusions: All in all, through this process, four distinct roles were identified, which retail beauty workers can assume to facilitate the implementation of GSCM practices. This entails effectively advocating for environmental friendly products to customers by showcasing their value, attractiveness, and appropriateness in meeting customers' requirements and preferences.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.1
• /
• pp.14-20
• /
• 2016

This paper describes a green stripping process to effectively strip the remaining DFR layer on a non-alkali-based ITO glass surface after an etching process. A stripper, water-soluble amine compound, is used to investigate the characteristics of stripping ability and to suggest a valid method for the green process. Increasing the composition (5-30% concentration) of the ethanol amine-based stripper was found to greatly reduce the stripping time applied in the dipping method. The composition (30%) achieved an excellent stripping effect and free-residue impurities. Additionally, it was possible to obtain the effect of stripping in a way to sustain the release before generating DFR sludge from the ITO glass surface by using dipping condition (stripping time) in the composition. An Additional stripping process (buffering) out of dipping can realize productivity improvement and cost reduction because of the higher proportion of re-use of the stripping solution used in the DFR removal step.

• Transactions of Materials Processing
• /
• v.19 no.3
• /
• pp.191-196
• /
• 2010

Tungsten-carbide as typical difficult-to-cut material has excellent mechanical properties such as high thermal resistivity, mechanical strength and chemical durability. However, it is next to impossible for tungsten-carbide to be fabricated the needed parts by cutting process. In this study, for establishing the micro fabrication method of tungsten-carbide for micro injection or compression molding core, the investigation on micro cutting characteristics of tungsten-carbide green part which is made by powder injection molding process and easy to cut relatively was performed. For this, micro endmilling experiments of tungsten-carbide green part were performed according to various cutting conditions. Finally, the wear trend of micro endmill and the appearance of micro rib according to feed-rate and cutting depth per step were analyzed through SEM images of micro cutting feature and microscope images of micro tools.

• Journal of Plant Biology
• /
• v.38 no.1
• /
• pp.1-10
• /
• 1995

Photoinhibition and its recovery of spectrally adapted Anacystis nidulans were studied. Phycocyanin and Chl content and phycocyanin/Chl ratio were increased in cells grown under blue-green light compared with those grown in white light. Photosynthetic activities of white light and blue-green light grown cells were reduced by 50% after 15 min and 10 min of photoinhibitory light treatment (1.2 mmol·m-2s-1), respectively, largely due to the decline of PSII activities. However, their activities were recovered fully after 30 min incubation under weak light. Treatment of rifampicin and chloramphenicol magnified the photoinhibitory effects and suppressed the recovery with disappearance of susceptibility to photoinhibition and delayed the recovery process, indicating no significant differences in phosphorylation, dephosphorylation and protease activity between two cells. Therefore, it is suggested that the increased sensitivity of blue-green adapted cells might be attributed to the decline of protein synthesis, and phosphorylation-dephosphorylation of protein and protease activity might be involved in the recovery process.

• Industrial Engineering and Management Systems
• /
• v.13 no.1
• /
• pp.15-28
• /
• 2014

Evaluation of the implementation and performance of a firm's green supply chain management (GSCM) is an ongoing process. Balanced scorecard is a multi-criteria evaluation concept that highlights implementation and performance measures. The literature on the framework is abundant literature but scarce on how to build a hierarchical framework under uncertainty with dependence relations. Hence, this study proposes a hybrid approach, which includes applied interpretive structural modeling to build a hierarchical structure and uses the analytic network process to analyze the dependence relations. Additionally, this study applies the fuzzy set theory to determine linguistic preferences. Twenty dependence criteria are evaluated for a GSCM implemented firm in Taiwan. The result shows that the financial aspect and life cycle assessment are the most important performance and weighted criteria.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.2
• /
• pp.118-123
• /
• 2007

The purpose of this work was to investigate the design and fabrication process effects on electrical properties in high capacitance multilayer ceramic capacitor (MLCC) with nickel electrode. Dielectric breakdown voltage and insulation resistance value were decreased with increasing stack layer number, but dielectric constant and capacitance were increased. With increasing green sheet thickness, dielectric breakdown voltage, C-V and I-V properties were also increased. The major reasons of the effects were thought to be the defects generated extrinsically during fabrication process and interfacial reactions formed between nickel electrode and dielectric layer. These investigations clearly showed the influence of both green sheet thick ness and stack layer number on the electrical properties in fabricating the MLCC.

• Journal of the Korean Solar Energy Society
• /
• v.30 no.6
• /
• pp.34-43
• /
• 2010

Recently environmental regulations like the Kyoto Protocol, adopted in 1997, required the reduction of the greenhouse gas of 5.2% up to 1990 regulations. and 13th General Assembly in 2007, held in Bali of India, have agreed to duty reduction even in developing countries in 2013. Because of the lack of information about real process in small or middle size industries, most recent research omitted to calculate green house gas emissions from the industrial process. Bottom-up methodology will be applied for calculation of green house gasemission from industry sector to solve these problems in this research. Total amount from industry sector of Shicheung-City in 2007 was about 1,797,305 tons of greenhouse gas $CO_2$ and 3,049,403 tons of the greenhouse gas $CO_2$ calculated from industry sector of Ansan-City in 2007.

• Journal of the Korean Ceramic Society
• /
• v.31 no.12
• /
• pp.1467-1474
• /
• 1994

The effects of the dispersion, drying, and binder burning-out on the green-microstructures of gelcasted alumina were studied. The slip consisting of 55 vol% alumina powder and 5 wt% organic materials was well-dispersed by adding 0.28 wt% polyelectrolyte polymer. Green bodies were dried at >85% relative humidity at room temperature. Green-microstructures were observed to be depended on the heating rate during binder burnout. Constant drying rate was not observed in drying process of gelcasted alumina. Sintered body showed its relative density higher than 99% when it was sintered at 1$600^{\circ}C$ for 2 hours.