• Mycobiology
• /
• v.30 no.1
• /
• pp.37-40
• /
• 2002

The susceptibility of radiata pine sapwood to fungal attack and the ability of selected fungicides to control colonization of sapstain and mold fungi on green radiata pine sapwood were evaluated. Radiata pine sapwood was highly susceptible to fungal staining, suggesting that prompt application of fungicides after sawing is essential for preventing fungal colonization. The ability of commercial fungicides to prevent fungal discoloration on radiata pine sapwood was assessed using an accelerated 6-week test on small samples in the laboratory, and in field tests using bulk-piled boards exposed outdoors for 6 weeks during summer rainy season. In laboratory tests, Hylite extra provided excellent protection against fungal discoloration even at the lowest concentrations. Hylite clear, Britewood S, and NP-1 Plus provided good short-term protection(2 to 4 weeks), but higher chemical loadings were, required for long-term protection(6 weeks). Woodguard produced little or no protection over the test periods. In field tests, Kathon 893 provided markedly superior protection at the concentration of 0.5 percent or higher. NP-1 Plus provided relatively good protection at all concentrations evaluated. Hylite extra was effective only for short-term protection(2 to 4 weeks) at all concentrations tested, but higher solution strengths were needed for longterm protection.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.6
• /
• pp.271-275
• /
• 2001

We investigated preparation of 1-3 PZT composites for medical ultrasonic transducer array (briefly UTA) using micro pressing method. The proposed process was using pressing PZT green sheet by PMMA micro mold obtained from X-ray lithography. Microstructures, electriacl and electro-mechanical properties of fabricated composites were analyzed. Dielectric constant at 1kHz and thickness mode electro-mechanical coupling coefficient of $6.2mm{\times}6.2mm{\times}422{\mu}m$ UTA sample were 1754 and 51%, respectively. Microstructures of sintered PZT showed dense and uniform. And PZT phases were well crystallized. Micro pressing method is a mass productive process in case of using injection molded PMMA by batch type LIGA process.

• Korean Journal of Medicinal Crop Science
• /
• v.16 no.6
• /
• pp.421-426
• /
• 2008

Three year-old peony (Paeonia. lactiflora Pall. cv. Taebaek) was cultivated in green-house at Jan. 15, Feb. 15, or Mar. 15, respectively. The mean of temperature during the forcing cultivation was higher (air; $1.0{\sim}11.1^{\circ}C$, soil; $1.1{\sim}7.4^{\circ}C$) than that of open-field condition. From sprouting to flowering in peony cultivated at Jan. 15 was about 54 days, which is shorted the cut flower periods (ca. 26 days) compared with the open-field cultivation. However, earlier forcing cultivars were very susceptible to pathogens such as powdery mildew or gray mold. The yield in green house was also lower than in the open-field cultivation. The content of bioactive compounds such as paeoniflorin and albiflorin in green-house cultivars was similar that of open-field cultivars. These results showed the forcing cultivation time of peony at Feb. 15 in green-house was most desirable for commercialization.

• The Korean Journal of Mycology
• /
• v.40 no.2
• /
• pp.118-123
• /
• 2012

In order to develop environment friendly fungicide for the control of citrus green mold (Penicillium digitatum) using endophytic bacteria, the 21 bacterial isolates were isolated from citrus leaves in seven different orchards in Jeju Province. Among the 21 bacterial isolates, 5 bacterial isolates presented antifungal activity against green mold pathogen P. digitatum. The CB3 isolate, which showed the most strong antagonistic effect, was selected through opposite culture against the pathogen. The rod-shaped, gram-positive bacterium CB3 was identified as Bacillus velezensis based on morphological, physiological characteristics, 16S rDNA, and gyr A gene sequence analysis. The isolate CB3 showed strong antifungal activity against two citrus postharvest pathogen P. digitatum. Citrus fruits were treated by wound inoculation with P. digitatum pathogen, and the control efficacy of CB3 culture broth was 66.7% ($1{\times}10^8$ cfu/ml). In conclusion, The stability of CB3 and its strong antifungal activity also lead us to believe that it has potential for application as an environment friendly biological control agent.

• The Korean Journal of Mycology
• /
• v.37 no.2
• /
• pp.144-149
• /
• 2009

The occurrences of the major diseases and the densities of air-born microbes were surveyed in the cultivation facilities for oyster mushroom (Pleurotus ostreatus), king oyster mushroom (Pleurotus eryngii), and enoki mushroom (Flammulina velutipes) in different areas of Korea. Green mold disease was most often developed in oyster mushroom bed cultivation with the disease incidence rate of approximate 10% while the disease incidences from bottle and plastic envelop cultivation were less than 1~2%. In the bed cultivation, the major air-born microbes in the growth room were Aspergillus, Penicillium, Trichoderma, and Curvularia with the total fungal population density of 567~1,297 CFU/$m^3$ . However, only Trichoderma and Penicillium were detected in the growth rooms and innoculation rooms of bottle and plastic envelop cultivation with the densities of 350~700 CFU/$m^3$ and 160~260 CFU/$m^3$, respectively. The bacterial diseases become evident in the growth rooms of bottle and plastic envelop cultivation with the approximate incidence rate of 10%. The identified bacterial species were Brevibacillus levelkil, Rhizobium radiobacter, Brevundimonas vesicularis, Pseudomonas mosselii, Microbacterium testaceum. Sphingomonas panmi, Sphingomonas yabuuchiae, Paracocus dinitrificans, Curtobacterium flaccumfaciens pv. flaccumfaciens and some unidentified bacteria with the densities of 40~6,359 CFU/$m^3$ in the growth rooms and 9 CFU/$m^3$ in the inoculation room. This study indicated that the green mold disease by fungal strains was the major mushroom disease in the bed cultivation and suggested that the contamination of bacteria and fungi together in the growth media could result in severe production loss. The plastic envelope and bottle cultivation were evidenced to be less susceptible to such contaminations.

• The Korean Journal of Mycology
• /
• v.32 no.1
• /
• pp.50-53
• /
• 2004

In March of 2003, the gray mold occurred severely on pea (Pisum sativum) grown in the green houses and open fields in Changseon-myon, Namhae-gun, Gyeongnam Province, Korea. The symptoms started with water-soaking lesions in the leaves, stems and pods. The typical symptoms of the leaves, stems and pods became withered, discolored and blighted, and then eventually died. The mycelia, conidia and conidiophore of the pathogen appeared on leaves, stems and pods. The conidia were gray, 1-celled, mostly ellipsoid or ovoid in the shape and were $8{\sim}17{\times}5{\sim}13\;{\mu}m$ in size. Conidiophores were $14{\sim}30\;{\mu}m$ in size. The sclerotia were formed abundantly on potato dextrose agar. The optimum temperature for sclerotial formation was $20^{\circ}C$. Pathogenicity of the causal organism was proven according to Koch's postulate. The causal organism was identified as Botrytis cinerea based on mycological characteristics. This is the first report on gray mold of Pisum sativum caused by B. cinerea in Korea.

• Research in Plant Disease
• /
• v.18 no.3
• /
• pp.255-258
• /
• 2012

In September 2011, black leaf mold caused by Pseudocercospora fuligena occurred on tomato plants growing in protected cultivation conditions in Boryong and Buyeo, Chungnam Province, Korea. Symptoms of the disease initially appeared as foliar chlorotic spots on upper leaf surfaces, turned light brown and then black on lower leaf surfaces as the fungus sporulates profusely. The causal fungus was isolated from the diseased plants and identified as P. fuligena based on morphological characteristics. Pathogenicity of the fungus was proved by artificial inoculation in the green house. This is the first report of the occurrence of black leaf mold of tomato caused by P. fuligena in Korea.

• Journal of the East Asian Society of Dietary Life
• /
• v.1 no.3
• /
• pp.277-298
• /
• 1991

Review of Korean and Chinese traditional nuruk was performed on the longitudinal change of ingredients and method of each nuruk. Manufacturing process of common nuruk was that flour, wheat chaff, grinded green pea and smartweed were doughed, footpressed to make 凹 type, covered it with mugwort, lotus leaf and cocklebur leaf and suspended it with string for 60 days to get wild mold. This is named Beungkuk. Manufacturing process of Sankuk was that cooked rice or uncooked rice grain was scattered, mixed often for 30 days. Ryokuk and Hongkuk are called Sankuk.

• Journal of the Korean Ceramic Society
• /
• v.29 no.9
• /
• pp.695-704
• /
• 1992

In (Pb, La)(Zr, Ti)O3 ceramic system, the functionally gradient material (FGM) was developed, and its processing and properties were investigated. The FGMs were successfully prepared through doctor blade method with acrylic binder system as well as mold stacking press method. The ultrasonic treatment was very effective for particle dispersion in slurry, and it lead to form clack-free green films. The strain-voltage characteristics of the FGM system was significantly improved which fabricated between a high piezoelectric-low dielectric and a low piezoelectric-high dielectric composition layer.

• Textile Coloration and Finishing
• /
• v.22 no.4
• /
• pp.300-305
• /
• 2010

Poly(ethylene terephthalate)(PET) tire cord has relatively lower adhesion properties caused by limited reacting sites. In order to improve the adhesion force between PET tire cord and rubber, an additional process to activate surface of PET has been employed. Atmospheric plasma was used to substitute the chemical finishing process of PET tire cord as a green dipping process. Contact angle was measured to confirm surface change of PET after plasma treatment. The treated PET tire cords with/without resorcinol-formaldehyde-latex(RFL) and unvulcanized rubber were vulcanized in a testing mold at $160^{\circ}C$. After atmospheric plasma treatment of PET tire cord, adhesion force was somewhat increased under some conditions.