• 대한의용생체공학회:의공학회지
• /
• 제42권3호
• /
• pp.116-124
• /
• 2021

It is important to differentiate between the target tissue (or organ) and the rest of the tissue before incision during surgery. And when it is necessary to preserve the differentiated tissues, the blood vessels connected to the tissue must be preserved together. Various non-invasive medical imaging methods have been developed for this purpose. We aimed to develop a medical imaging system that can simultaneously apply fluorescence imaging using indocyanine green (ICG) and laser speckle contrast imaging (LSCI) using laser speckle patterns. We designed to collect images directed to the two cameras on a co-axial optical path and to compensate equal optical path length for two optical designs. The light source used for fluorescence and LSCI the same 785 nm wavelength. This system outputs real-time images and is designed to intuitively distinguish target tissues or blood vessels. This system outputs LSCI images up to 37 fps through parallel processing. Fluorescence for ICG and blood flow in animal models were observed throughout the experiment.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.532-534
• /
• 2000

Si thin films on p-type (100) Si substrate have been fabricated by pulsed laser deposition technique using a Nd:YAG laser. The pressure of the environmental gas during deposition was varied from 1 to 3 Torr. After deposition, Si thin film has been annealed again at nitrogen ambient. Strong violet-indigo photoluminescence have been observed from Si thin film annealed in nitrogen ambient gas. As increasing environmental gas pressure, weak green and red emissions from annealed Si thin films also observed by photoluminescence.

• Korean Journal of Acupuncture
• /
• 제27권1호
• /
• pp.125-142
• /
• 2010

Objectives: The purpose of this study was to identify the effectiveness of neuronal activities for the acupuncture and laser acupuncture application. Methods: The subject were divided into 7 groups as control group without acupuncture, acupuncture treatment with tonify manipulation with the direction of channel at HT9, LR1(AT-A), acupuncture treatment with purge manipulation against the direction of channel at HT3, Kl10(AT-B), acupuncture treatment with tonify manipulation with the direction of channel at HT9, LR1 and purge manipulation against the direction of channel at HT3, KI10(AT-C), laser acupuncture treatment with red light 658 nm at HT9, LR1(LAT-A), laser acupuncture treatment with green light 532 nm at HT3, KI10(LAT-B), laser acupuncture treatment with red light 658 nm at HT9, LR1 and green light 532 nm at HT3, KI10(LAT-B). Antiapopotic effect of acupuncture was observed by Bax, Bcl-2 and cytochrome C. Neuroprotective effect of acupuncture was observed by cresyl violet and ChAT. Results: AT-A, AT-B, AT-C, LAT-A, LAT-B and LAT-C groups were significantly increased comparing the control groups in expression ChAT and in neuroprotective effect by cresyl violet. AT-A, AT-B, AT-C, LAT-A, LAT-B and LAT-C groups were significantly decreased comparing the control groups in expression Bax. AT-C, LAT-A, LAT-B and LAT-C groups were significantly increased comparing the control groups in expression Bcl-2. AT-A, AT-B, AT-C, LAT-A, LAT-B and LAT-C groups were significantly decreased comparing the control groups in Bax/Bcl-2 ratio. LAT-B and LAT-C groups were significantly decreased comparing the control groups in expression cytochrome C. Conclusions: The acupuncture with tonify and purge manipulation and laser acupuncture with red and green light could be effective for antiapopotic and neuroprotective effect in focal brain ischemia.

• 한국광학회지
• /
• 제8권3호
• /
• pp.183-188
• /
• 1997

색분리 필터는 하나의 파장영역에서는 고반사, 다른 파장영역에서는 고투과를 제공하는 광학소자이다. 레이저를 이용한 디스플레이장치의 광학계를 구성하기 위해서는 정확한 색상의 분리가 요구되며, 광학계 효율 측면에서 매우 중요하다. 본 연구에서는 Kr-Ar laser(혼합 gas)빔을 R.G.B 삼색으로 분리하여 화상을 구현하기 위한 미러와 필터를 아래와 같은 특성을 만족하도록 설계 및 제작하였고, 그 특성은 45.deg./S-편광된 빔을 입사시켜서 1) R(반사율)>99% 450~493 nm, T(투과율)>90% 509~685 nm 2) R(반사율)>99% 509~685 nm, T(투과율)>90% 450~493 nm 3) R(반사율)>99% 509-585 nm, T(투과율)>90% 600~683 nm를 각각 만족하는 소자로 색분리를 실현하여 레이저 프로젝션 시스템을 구성하는데 사용하였다.

• 한국재료학회지
• /
• 제18권3호
• /
• pp.113-116
• /
• 2008

A 532 nm Nd-YAG laser was applied to crystallize amorphous Si thin films in order to evaluate the applicability of a Nd-YAG laser to low-temperature polycrystalline Si technology. The irradiation of a green laser was controlled during the crystallization of amorphous Si thin films deposited onto glass substrates in a sophisticated process. Raman spectroscopy and UV-Visible spectrophotometry were employed to quantify the degree of crystallization in the Si thin films in terms of its optical transmission and vibrational characteristics. The effectiveness of the Nd-YAG laser is suggested as a feasible alternative that is capable of crystallizing the amorphous Si thin films.

• Journal of Welding and Joining
• /
• 제27권6호
• /
• pp.9-16
• /
• 2009

In this paper, the coaxial monitoring system to capture image of weld pool was developed in laser-arc hybrid welding. In order to obtain the reliable image, green laser was used as a illumination system and measuring components such as band pass filter, ND (Neutral Density) filter and shutter speed was designed and optimized. Using this monitoring system, weld pool images were captured according to laser power, welding speed, welding current and interspace between laser and arc through the experiment. ANOVA (Analysis of Variation) was carried out to identify the influence of process variables on bead widths extracted from captured images of monitoring system. Welding speed and current were major factor to affect weld pool.

• 반도체디스플레이기술학회지
• /
• 제16권3호
• /
• pp.36-40
• /
• 2017

In this paper, a new method of laser trimming of thick film heater is studied. Various laser waves (IR, Green, UV) are used to ablation the heater and the process parameters are also presented. For given initial printed resisters, the cutting length should be prepared to obtain the target resister value in advance. Therefore, the cutting model is very important. The well-known model was tested and proven that it is valid only within a certain range of cutting length. A new model is proposed for a wide range of resister laser trimming. The cutting lengths and resister variation was obtained and formulated. To verify the presented method, the cutting lengths of each resister are calculated for various target resister value and laser trimming using UV is conducted.

• 한국재료학회지
• /
• 제7권3호
• /
• pp.213-217
• /
• 1997

200MHz 응향광변조기 (AOM: Acousto-Optic Modulator)는 제 2고조파(SHG: Second Harmonic Generation)녹색 레이저와 함께 DVDR(Digital Video Disk Recorder)에 적용되어 고밀도 광기록용으로 사용되었다. 이러한 고밀도 광기록 장치로써 사용되기 위해서는 고출력 레이저의 사용이 필수적이며, 레이저 빔이 통과하는 각 광학 소자들의 코팅막은 고출력 레이저 빔에 대해 높은 레이저 damage threshold를 가져야 한다. AOM의 음향공학재료로 사용되는 $TeO_{2}$단결정에 코팅막의 종류 및 증착조건을 변화시키며 E-beam 증착법으로 A/R코팅 시편을 준비하였다. 0.55W의 입력 power를 갖는Ar레이저를 사용하여 코팅의 광손상 정도를 확인하였다. $AI_{2}O_{3}$막에 비해 $ZrO_{2}$와 $SiO_{2}$막을 사용한 경우 레이저 damage threshold는 크게 향상되었다. 또한 AOM모듈을 제작 후 구동회로와 연결하여 약 20mW의 SHG power를 입력시키며 출력 power long term안정성을 측정하였다.

• International Journal of Precision Engineering and Manufacturing-Green Technology
• /
• 제5권5호
• /
• pp.593-604
• /
• 2018

Laser-assisted machining (LAM) is known to be an effective and economical technique for improving the machinability of difficult-to-machine materials. In the LAM method, material is preheated using a laser heat source and then the preheated area is removed by following cutting tool. For laser-assisted turning (LAT), the configuration of the system is not complicated because laser irradiates from a fixed position. In contrast, laser-assisted milling (LAMill) system is not only complicated but also difficult to control because laser heat source must always move ahead of the cutting tool along a three dimensional (3D) tool path. LAMill is still early stage and cannot yet be used to machine finished products with 3D shapes. In this study, a laser-assisted fillet milling process was developed for machining 3D shapes. There are no prior studies combining fillet milling and LAMill. Laser-assisted fillet milling strategy was proposed, and effective depth of cut (EDOC) was obtained using thermal analysis. Experiments were designed using response surface method and cutting force prediction equations were developed using statistical analysis and regression analysis. The optimum machining conditions were also proposed, and energy efficiency of the LAMill was analyzed by comparing the specific cutting energy of conventional machining (CM) and LAMill.

• 한국전기전자재료학회논문지
• /
• 제14권3호
• /
• pp.246-250
• /
• 2001

ZnO thin films for light emission device have been deposited on sapphire and silicon substrates by pulsed laser deposition technique(PLD). A Nd:YAG laser was used with the wavelength of355 nm. In order to investigate the emission properties of ZnO thin films, Pl measurements with an Ar ion laser a light source using an excitation wavelength of 351 nm and a power of 100 mW are used. All spectra were taken at room temperature by using a grating spectrometer and a photomultiplier detector. ZnO exhibited Pl bands centers around 390, 510 and 640 nm, labeled near ultra-violet(UV), green and orange bands. Structural properties of ZnO thin films are analyzed with X-ray diffraction(XRD).