• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.739-744
• /
• 2002

Recently we have discovered that sediments should be separated from lithosphere, and soil should be separated from biosphere, both sediment and soil will be mixed sediments-soil-sphere (Seso-sphere), which is using particulate mechanics to be solved. Erosion and sediment both are moving by particulate matter with water or wind. But ancient sediments will be erosion same to soil. Nowadays, real soil has already reduced much more. Many places have only remained sediments that have ploughed artificial farming layer. Thus it means sediments-soil-sphere. This paper discusses sediments-soil-sphere erosion modeling. In fact sediments-soil-sphere erosion is including water erosion, wind erosion, melt-water erosion, gravitational water erosion, and mixed erosion. We have established geographical remote sensing information modeling (RSIM) for different erosion that was using remote sensing digital images with geographical ground truth water stations and meteorological observatories data by remote sensing digital images processing and geographical information system (GIS). All of those RSIM will be a geographical multidimensional gray non-linear equation using mathematics equation (non-dimension analysis) and mathematics statistics. The mixed erosion equation is more complex that is a geographical polynomial gray non-linear equation that must use time-space fuzzy condition equations to be solved. RSIM is digital image modeling that has separated physical factors and geographical parameters. There are a lot of geographical analogous criterions that are non-dimensional factor groups. The geographical RSIM could be automatic to change them analogous criterions to be fixed difference scale maps. For example, if smaller scale maps (1:1000 000) that then will be one or two analogous criterions and if larger scale map (1:10 000) that then will be four or five analogous criterions. And the geographical parameters that are including coefficient and indexes will change too with images. The geographical RSIM has higher precision more than mathematics modeling even mathematical equation or mathematical statistics modeling.

• Research in Plant Disease
• /
• v.12 no.2
• /
• pp.115-118
• /
• 2006

In February of 2000-2001, the gray mold disease occurred on nephrolepis (Nephrolepis sp.) grown in a flower nursery farm in Suwen, Korea. Typical symptoms were water-soaked brown or blackish lesions on terminal leaf blades. Severely infected leaves were entirely blighted with grayish fungal mycelia formed on the surface. Conidia of the fungus in mass were hyaline or gray, 1-celled, mostly ellipsoid or ovoid and $13.5{\sim}16.9{\times}6.8{\sim}9.2{\mu}m$ in size. Conidiophores were formed on PDA with $8.7{\sim}11.1{\mu}m$ in width. The sclerotia were readily formed within 2 or 3 days on PDA. In addition, the Biolog database gave the causal fungus a high similarity to Botrytis cinerea (78%) with a match probability of 100%. Pathogenicity of the causal organism was proved according to Koch's postulate. The causal organism was identified as Eotrytis cinerea based on its mycological characteristics and utilization of carbon sources with Biolog system as supporting data. This is the first report of gray mold of nephrolepis caused by Botrytis cinerea in Korea.

• Clean Technology
• /
• v.17 no.4
• /
• pp.353-362
• /
• 2011

In our nature, the utilization of rainwater is essential for healthy water recirculation. This is one of the solutions of the increment of impermeability surface according to the development of new cities; this study of the improvement of rainwater quality has been carried on through the improvement of collecting and restoring system of rainwater. The southwestern region of Daejeon City, the rainwater coefficient of run off was 0.40 and this number had computed to 0.59 after the development. After filtration of rainwater, the heavy metal (Cu, As, Cr, Fe, Mn) contents level were lower than underground water. Moreover, collected rainwater showed better quality than underground water in following criteria; hardness, permanganate consumption quality, chloride, evaporation residue, sulfates and nitrate nitrogen. This water quality met the gray water quality standards. The rainwater quality was still suitable to use as bathroom flushing and gardening after 100 days of storage. This study proved that modification (installation of cover with gutter to existing rainwater collection system, proper filtering, and installation of underground storage tank) of collection system could improve quality of water and maintain this approximately 100 days.

• Textile Coloration and Finishing
• /
• v.28 no.4
• /
• pp.290-298
• /
• 2016

In this study, the efficacy of water lily(Nymphaea tetragona) leaves as a new natural dye resource was investigated. For this purpose, the colorants from water lily leaves were extracted in methanol, evaporated, and powdered. Dyeing onto cotton fiber was carried out to study the effects of dyeing conditions, mordant type and mordanting method on dye uptake, color change, and colorfastness. FTIR analysis supported that hydrolyzable tannins and chrolophyll were contained in the extracted colorants. The colorants showed good affinity to cotton fiber showing Y Munsell color. Pre-mordanting method gave better results in terms of dye uptake than post-mordanting method. By mordanting, dyed fabrics exhibited various colors such as green, khaki, brownish yellow, dark brown, dark gray and so on. Colorfastness to washing and rubbing was relatively good showing 4-5 rating. The light fastness was improved 1-2 rating by Fe mordanting. The dyed cotton fabric showed antimicrobial activity.

• Journal of Power System Engineering
• /
• v.13 no.5
• /
• pp.25-33
• /
• 2009

In the present study, the numerical investigation has been carried out to see the effects of water mist sprays on the fire suppression mechanism. The special-purposed program named as FDS was used to simulate the interaction of fire plume and water mists. This program solves the fire-driven flows using LES turbulence model, the mixture fraction combustion model, the finite volume method of radiation transport for a non-scattering gray gas, and conjugate heat transfer between wall and gas flow. The computational domain was composed of a rectangular space dimensioned as $L{\times}W{\times}H=4.0{\times}4.0{\times}2.5\;m^3$ with a mist-injecting nozzle installed 1.0 m high from the fire pool. In this paper, two types of nozzles were chosen to compare the performance of the fire suppression. Numerical results showed that the nozzle, type A, with more orifices having smaller diameters had poorer performance than the other one, type B because the flow injected through side holes deteriorated the primary flow. The fire-extinguishing time of type A was 2.6 times bigger than that of type B.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.14 no.2
• /
• pp.59-65
• /
• 1981

The purpose of the present study is to find the light intensity which induces maximum gathering rate and to observe the variation of the gathering rate both in daytime and at night by rising two species of commercial fishes: gray rock cod. Sebastes inermis (Cuvier et Valenciennes) and cat shark, Scyliorhinus torazame (Tanaka). An experimental tank $(360L\;{\times}\;50W\;{\times}\;55H\;cm)$ was set up in a dark room. An illumination system was attached to one end of the tank to control horizontal light intensity. Six artificial light sources were prepared by combination of two light bulbs (5W, 150W) and seven filters. During the experiment water depth was maintained 50 cm level in the tank. The tank was marked into six longitudinal sections each being 60 cm long to observe the distribution of fish. The fish were acclimatized in dark condition for 40 minutes prior to the main experiment. Upon turning on the light, the number of fish in each section was counted 40 times every 30 seconds, and the gathering rates were obtain from the average number of fish in each section. The light intensity inducing maximum gathering rate is as follows: gray rock cod: 16.6 lux (10.6-24.5 lux) (day), 0.7 lux (0.5-1.1 lux) (night), cat shark: 1.9 lux (1.2-2.9 lux) (day), 16.6 lux(10.6-24.5lux) (night). Trend of the gathering rate in illumination time revealed different results in two fish species. Gathering rate of gray rock cod did not show any definite pattern but fluctuated irregularly. The gathering rate was some fluctuating at night. However, that of cat shark was almost constant and did not show any distinctive difference between day and night.

• Applied Chemistry for Engineering
• /
• v.7 no.2
• /
• pp.379-386
• /
• 1996

Photosensitive compound, 1-methyl-4-[2-(4-diethylacetylphenyl)ethenyl] pridinium methosulfate(SbQ-A salt), was synthesized from dimethyl sulfate, terephthalaldehyde mono-(diethylacetal) and 4-picoline. SbQ-A salts were reacted with poly(vinyl alcohol)s, (PVA) in aqueous solution with phosphoric acid as catalyst to give photosensitive PVA-SbQ with different SbQ content and molecular weight. Relative photosensitivity of PVA-SbQ was determined by gray scale(GS) method. The rotative sensitivity of PVA-SbQ increased with increasing amount of bound SbQ in the case of high molecular weight(MW=77,000-79,000g/mol) as substrate and decreased with decreasing molecular weight of PVA with about constant(1.3mol%) amount of bound SbQ. The most sensitive polymer was obtained when SbQ group content in PVA-SbQ reached about 2.63mol% in the case of high molecular weight(77,000-79,000g/mol) PVA. This sample showed 90 times greater sensitivity than dichromated PVA as reference photosensitive system. PVA-SbQ photosensitive polymer synthesized was applied to the photolithographic screening process of phosphor on the panel of cathode ray tube(CRT). Phosphor slurry was made with PVA-SbQ, phosphor, a small amount of surfactant and other additives using water as medium. The slurry was coated onto panel, dried by heater, exposed to UV light and then developed by distilled water. When a small amount of cationic surfactant such as cetyltrimethylammonium chloride was used in the slurry formulation, the sharpness of phosphor pattern was equal to or better than that of dichromated PVA photosensitive polymer system used currently.

• Journal of the korean society of oceanography
• /
• v.39 no.1
• /
• pp.96-106
• /
• 2004

A total of 116 surface sediment samples were obtained on the Yellow Sea and analyzed for grain size and geochemical elements in order to interpret the present sediment transportation. Thirty-nine cores and 3,070 line-km shallow seismic profiles are analyzed for sedimentary records of Yellow Sea in the past. Results show that the boundary of sediment transport between Korean side and Chinese side is about between $123^{\circ}E$ and $124^{\circ}E$. The similar result is produced from Shi et al. (in this publication). Two cyclonic patterns of surface sediments are recognized in the northeastern and southwestern Yellow Sea, while the strong front zone of the mud patch and sandy sediments are found in the southeastern Yellow Sea (the southwestern part of Korean coasts). The formation of fine-particle sediment packages, called for Northwest Mudbelt Deposit (NWMD), Hucksan Mudbelt Deposit (HSMD) and Jeju Mudbelt Deposit (JJMD), are resulted from eddies (gyres) of water circulations in the Yellow Sea. NWMD has been formed by cyclonic (anticlockwise) eddy. NWMD is composed of thick, homogeneous, relatively semi-consolidated gray clay-dominated deposit. On the other hand, HSMD and JJMD are formed by anticyclonic (clockwise) eddies. They are thick, homogeneous, organic-rich gray, silt-dominated deposit. Both core and surface sediments show that the middle zone across Chinese and Korean side contains bimodal frequency of grain-size distribution, indicating that two different transport mechanisms exist. These mud packages are surrounded by sand deposits from both Korea and China seas, indicating that Yellow Sea, which is the shallow sea and epicontinental shelf, is formed mostly by sand deposits including relict sands. The seismic profiles show such as small erosional/non-depositional channels, sand-ridges and sand-waves, Pleistocene-channelfilled deposits, a series of channels in the N-S major channel system, and thick Holocene sediment package, indicating that more complex sedimentary history exists in the Yellow Sea.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.21 no.6
• /
• pp.1483-1490
• /
• 2007

This study was carried out to investigate the effects of GCP treatment on the expression of NOS, c-fos, serotonin and substance P in central nerve system of monosodium iodoacetate(MIA)-induced osteoarthritic pain model. Arthritis was induced by injection of MIA(0.5 mg) into knee joint cavities of rats. Arthritic rats were divided into control(n=8) and treated(n=8) group. Control group was taken distilled water for 20 days. Treated group was taken extracts of GCP by oraly for same duration. Normal group(n=8) was infected with normal saline and was taken distilled water for 20 days. The numbers of NADPH-d positive cells in superficial dorsal horn of spinal cord of treated group($21{\pm}5$) was significantly (p<0.01) decreased compared with control($33{\pm}5$). The numbers of NADPH-d positive cell in dorsolateral periaqueductal gray matter of treated group($111{\pm}16$) was significantly(p<0.01) decreased compared with control($143{\pm}14$). The numbers of c-fos positive cells in dorsal periaqueductal gray matter of treated group($57{\pm}16$) was significantly(p<0.01) decreased compared with control($78{\pm}13$). The numbers of c-fos positive cells in paraventricular thalamic nucleus of treated group($60{\pm}15$) was significantly decreased compared with control($88{\pm}27$). The numbers of serotonin positive cells in median raphe nucleus of treated group($171{\pm}31$) was significantly(p<0.05) decreased compared with control($217{\pm}48$). On the basis of these results, we concluded that GCP treatment has inhibiting effects on the pain transmission in monosodium iodoacetate-induced osteoarthritic pain model in rat.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.25 no.6
• /
• pp.65-75
• /
• 2022

Urban flood management(UFM) strategy ought to consider the connections and interactions between existing and new infrastructures to manage stormwater and improve the capacity to treat water. It is also important to demonstrate strategies that can be implemented to reduce the flow at flooding sources and minimize flood risk at critical locations. Although the general theory of spatial impact is popular, modeling guidelines that can provide information for implementation in real-world plans are still lacking. Under such background, this study conducted a modeling research based on an actual target site to confirm the hypothesis that it is appropriate to install green infrastructure(GI) in the source area and to take structural protection measures in the impact area, as summarized in previous studies. The results of the study proved the hypothesis, but the results were different from the hypothesis depending on which hydrological performance indicators were targeted. This study will contribute to demonstrating the effectiveness of strategies that can be implemented to reduce the flow at flooding sources and minimize the risk of flooding in critical locations in terms of spatial planning and regeneration.