• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.71-72
• /
• 2010

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1144-1149
• /
• 2008

Converting technology has developed to print information for the decades. Recently, this technology (like gravure, gravure-offset) is rising as an alternative way for mass production of printed electronics such as RFID, solar cell. For the width of printing line is under 10 microns, registration error should be minimized less than several microns. Tension disturbance is main cause of registration error and this should be minimized before the substrate is transported into printing zone. With PI controller, it is possible to suppress the disturbance within 2% of operating tension. But register error appears more than 10 micron using PIcontroller considering noise. So LQG controller is needed as an alternative control method. In this paper, the comparision of PI and LQG controller in the converting machine including measured noise and tension disturbance is presented. It is shown that the LQG controller is more suitable for precision tension control in printed electronics.

• 한국인쇄학회지
• /
• 제16권2호
• /
• pp.23-36
• /
• 1998

Moisture content of printing paper and circumstance of printing room has great influence on the printing works. We have studied on the printability of domestic art paper according to the insufficient Korea weather. As the result, we found the printability of domestic art paper are much more affect by moisture content than any other printability coefficients, especially print density and hygroexpansivity decrease with moisture content increase.

• 한국인쇄학회지
• /
• 제16권1호
• /
• pp.13-24
• /
• 1998

The color difference caused by the overprinting sequence of ink in multicolor printing is due to both trapping and optical properties of ink layers. Hence the effect of optical properties only cannot be analyzed without removing the effect of ink trapping This study was carrier out for the purpose of analyzing optically the color difference caused by only the optical properties of ink under the various printing sequence. The present optical analysis for overprints showed a good agreement with the experimental result. It is expected that this study may contribute to decreasing the color difference between the original and the printed reproduction in multi-color printing.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1065-1066
• /
• 2008

Printed thin-film transistors (TFTs) have received profound interests as an alternative to their silicon counterparts for use in fabricating next-Gen microelectronics by virtue of projected low manufacturing cost and certain salient features (e.g., thin and lightweight characteristics, structural flexibility, etc.) that printed TFTs bring to device architecture. The economic advantages stem from engaging low-cost printing techniques (e.g., screen printing, gravure, flexography, etc.) for deposition and patterning in place of traditionally costly high-vacuum, high-temperature photolithographic processes. To render printing TFTs possible, solution processable materials are necessary.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.665-666
• /
• 2009

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제37회 하계학술대회 초록집
• /
• pp.383-383
• /
• 2009

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2008년도 제35회 하계학술대회 초록집
• /
• pp.185-185
• /
• 2008

• 한국정밀공학회지
• /
• 제17권11호
• /
• pp.191-198
• /
• 2000

Laser direct patterning of the coated photoresist (PMER-NSG31B) layer was studied to make halftone dots on gravure printing roll. The selective laser hardening of photoresist by Ar-ion laser(wavelength: 333.6~363.8nm) was controlled by the A/O modulator. The coating thickness in the range of 5~11$\mu m$ could be obtained by using the up-down directional moving device along the vertically located roll. The width, thickness and hardness of the hardened lines formed under the laser power of 200~260㎽ and irradiation time of 4.4~6.6 $\mu$sec/point were investigated after developing. The hardened width increased as the coating thickness increased. Though the hardened thickness was changed due to the effect of the developing solution, the hardened layer showed good resistance to the scratching of 2H pencil. Also, the hardened minimum line widths of 10$\mu m$ could be obtained. The change of line width was also found after etching, and the minimum line widths of 6$\mu m$ could be obtained. The hardened lines showed the good resistance to the etching solution. Finally, the experimental data could be applied to make gravure halftone dots using the developed imaging process, successfully.

• 한국정밀공학회지
• /
• 제29권1호
• /
• pp.19-24
• /
• 2012

We demonstrate the desert beetle back mimicking hybrid superhydrophilic/superhydrophobic patterned surface by using the combination method of colloidal lithography and gravure offset printing for nano and micro patterning, respectively. The two methods are cost-effective and industrially available techniques compared to the other nano/micro patterning methods. To verify the water collecting function of the hybrid surface, the water condensation behavior is investigated on the chilled surface in ambient temperature and high humidity. Due to the synergetic effect of drop and film wise condensation, the hybrid superhydrophobic/superhydrophilic surface shows the higher efficiency than one of single wettability surfaces. The work is underway to get the good patterns of hybrid surfaces for water collecting from the dew or fog.