• 제어로봇시스템학회논문지
• /
• 제21권12호
• /
• pp.1167-1172
• /
• 2015

This paper describes the implementation of wearable AHRS for an electromagnetic motion capture system that can trace and analyze human motion on the principal nine axes of inertial sensors. The module provides a three-dimensional (3D) attitude and heading angles combining MEMS gyroscopes, accelerometers, and magnetometers based on the extended Kalman filter, and transmits the motion data to the 3D simulation via Wi-Fi to realize the unrestrained movement in open spaces. In particular, the accelerometer in AHRS is supposed to measure only the acceleration of gravity, but when a sensor moves with an external linear acceleration, the estimated linear acceleration could compensate the accelerometer data in order to improve the precision of measuring gravity direction. In addition, when an AHRS is attached in an arbitrary position of the human body, the compensation of the axis of rotation could improve the accuracy of the motion capture system.

• 항공우주산업기술동향
• /
• 제8권2호
• /
• pp.39-45
• /
• 2010

질량이 크고 정밀한 정렬이 요구되는 전개형 영상 레이더를 장착하기 위해서는 일반적으로 위성을 수평상태로 놓고 조립을 수행하게 된다. 이는 전개형 안테나의 회전축을 중력축과 일치시키고 전개형 안테나를 중력방향과 반대로 질량을 보상함으로써 무중력 상태를 만들어 회전축에 무리한 힘을 가하지 않기 위함이다. 이러한 전개형 영상 레이더를 장착하기 위해서는 위성이 수평 상태로 놓이더라도 위성체 처짐이 없는 수직상태와 동일한 형상을 만들어 주어야 한다. 처짐이 발생한 위성체에 안테나를 장착하고 수직상태로 변경하면 처짐이 발생한 부분이 강제적으로 원상복귀하려는 힘으로 인해 안테나 정렬이 틀어질 수 있기 때문이다. 본 논문에서는 수평상태에서 위성의 처짐값을 확인하기 위한 방안을 찾고 처짐 보상을 위한 Reaction Force 값을 어떻게 구할 것인지를 보여주고 있다.

• The Korean Journal of Physiology
• /
• 제7권1호
• /
• pp.13-21
• /
• 1973

An attempt was made to study circulatory and respiratory responses to the passive tilt. Anesthetized dogs were tilted from horizontal to upright $(+90^{\circ})$ and head down $(-90^{\circ})$ position. The arterial blood pressure was decreased in the upright position and was decreased slightly in the head down position comparing to that in the horizontal position. Cardiac index also decreased in the both upright and head down positions. The total systemic vascular resistance was slightly increased in the upright position and was markedly increased in the head down position. The mean pulmonary arterial pressure was significantly decreased in the both upright and head down positions. The total pulmonary vascular resistance was decreased in the both upright and head down positions. Oxygen consumption was slightly decreased in the upright position, whereas it was slightly increased in the head down position. The A-V $O_2$ difference (vol. %) was slightly increased in the upright position and increased in the head down position. From the above results, process of the circulatory compensation to the gravity in the Passive tilting test was discussed. Neuronal cardiovascular regulation to the gravity and tile adaptation of capacitance vessles to hydrostatic stress and oxygen consumption concerning anoxic endurance of the brain were also discussed.

• 한국항공우주학회지
• /
• 제46권7호
• /
• pp.583-591
• /
• 2018

본 논문에서는 하나의 큰 태양전지판 전개시험을 위해 새로운 전개시험장치를 제안하였다. 지상에서 전개시험을 수행하기 위해서는 궤도에서와 유사한 무중력 환경을 만들기 위해 중력 보상을 고려한 장치를 사용해야 한다. 기존에 주로 사용되는 전개시험장치를 시험하고자 하는 태양전지판 전개에 적용 가능한지 판단하기 위해 간단한 개념설계, 해석 그리고 시험 등을 통해 장단점을 분석하였다. 지상 시험의 문제점인 공기저항 문제를 해결하기 위해 더미 프레임을 제안하였으며 중력축과의 정렬 문제를 해결하기 위해 전개 장치에 자동조심 베어링 및 조절나사를 적용하였다. 그리고 테잎 스프링 힌지축의 변화를 보상하기 위해 반지름 방향 이동을 위한 수평 이동 베어링이 적용되었다. 이로부터 본 논문에서 전개하고자 하는 태양전지판에 특성화된 새로운 전개시험장치를 개발하고 검증함으로써 기존 전개시험장치의 문제점을 해결하였다.

• Journal of Positioning, Navigation, and Timing
• /
• 제1권1호
• /
• pp.45-49
• /
• 2012

The flight performance evaluation of navigation system is very significant because the reliability of navigation data directly affect the safety of aircraft. Especially, the high-level navigation system such as DGPS/INS, need more precise flight performance evaluation method. The performance analysis is evaluated by comparing between the navigation system in aircraft and reference trajectory which is more precise than navigation system in aircraft. In order to verify DGPS/INS performance of m-level, the GPS receiver, which is capable post-processed Carrier-phase Differential GPS(CDGPS) method of cm-level, have to be used as reference system. The DGPS/INS is estimated the Center of Gravity (CG) point of aircraft to offer precise performance while the reference system is output the position of GPS antenna which is mounted on the outside of aircraft. Therefore, in order to more precise performance evaluation, it needs to compensate the lever arm and coordinates transformation. This paper use quaternion and Direct Cosine Matrix(DCM) methods as coordinate transformation matrix in lever arm compensation of CDGPS reference trajectory. And it compares NED errors of DCM and quaternion transformation in lever arm of reference trajectory via DGPS/INS result.

• 한국멀티미디어학회논문지
• /
• 제16권1호
• /
• pp.67-74
• /
• 2013

본 논문에서는 블루투스 통신 기반에서 최적의 성능을 위한 포인팅 및 보정 알고리즘을 제안한다. 가속도 센서는 각속도 센서보다 데이터 변화량이 더 민감하기 때문에 데이터 출력 값의 오류를 야기하는 주된 원인이 된다. 따라서 가속도 센서로부터의 각 축에 대한 데이터 값에 칼만 필터를 적용함으로써 노이즈를 최소화하였으며, 추가적으로 x, y 변화량에 칼만 필터를 적용함으로써 손 떨림에 대한 보정 효과를 얻을 수 있다. 본 논문에서는 가속도와 각속도 센서 데이터를 Quaternion 사상 처리를 통해 데이터 추출을 적용한다. 추출된 데이터 값에 중력 가속도를 이용한 기울임 보정 알고리즘을 적용함으로써 기울임 보정 효과를 얻을 수 있다. 또한 장치의 급격한 움직임에 의한 센서 데이터의 부정확성을 해결하기 위하여 유전자 알고리즘을 적용한 사용자에 따라 달리 초기 해집단을 생성하는 적응적 포인팅 및 보정 알고리즘을 구현한다.

• 로봇학회논문지
• /
• 제11권1호
• /
• pp.26-32
• /
• 2016

A variable release torque-based compliance spring-clutch (VCSC) is presented. VCSC is a safe joint to reduce the impact of collisions between humans and robots. It is composed of four functional plates, balls, springs to make some functions in compliant movement, release mechanism, gravity compensation during its work. Also, it can estimate torque applied to a joint by using distance sensor and parameters of cam profile. The measured variable torque of prototype is 4.3~7.6 Nm and release torque is 4.3 Nm. In our future studies, a calibration for torque estimation will be conducted.

• 한국생산제조학회지
• /
• 제8권5호
• /
• pp.76-82
• /
• 1999

During operating given working a robot manipulator makes some problems such as the accumulation of the error or the deviation from the command trajectory. These problems are mainly due to the disturbance noise or unmodeled system parameters. To solve these problems most of robot manipulators equip the controller. But if exact controller gains are not seleced we can't decrease the working efficiency(such as compensation about error or deviation) of the robot manipulator. So in this paper we present the controller gain tuning law by which we can find the controller gain which satisfies the per-formance specification of the robot manipulator during working of the robot. The proposed algorithm is derived from the Laypunov direct method. And by the simulation on the 4-axis SCARA type robot(SAMSUNG SM5 Robot) we guarantee the performance of this algorithm.

• 로봇학회논문지
• /
• 제15권2호
• /
• pp.131-138
• /
• 2020

This paper proposes a low-cost robotic surgery system composed of a general purpose robotic arm, an interface for daVinci surgical robot tools and a modular haptic controller utilizing smart actuators. The 7 degree of freedom (DOF) haptic controller is suspended in the air using the gravity compensation, and the 3D position and orientation of the controller endpoint is calculated from the joint readings and the forward kinematics of the haptic controller. Then the joint angles for a general purpose robotic arm is calculated using the analytic inverse kinematics so that that the tooltip reaches the target position through a small incision. Finally, the surgical tool wrist joints angles are calculated to make the tooltip correctly face the desired orientation. The suggested system is implemented and validated using the physical UR5e robotic arm.

• 산업기술연구
• /
• 제19권
• /
• pp.351-359
• /
• 1999

If the tactile sense is introduced to engineering and industries, it may provide more realistic virtual tactile sensing to human and it is possible to develop product that satisfy various consumer's taste. This paper presents a compliance emulator system as a new concept of tactile reproduction simulator which uses magnetic levitation in order to minimize friction and emulates compliance only along the vertical direction. Compliance is one of the important mechanical properties of the object related to tactile sensing of the human. The implemented system equipped with an analog LVDT sensor for a position sensor and employs a PD control with gravity compensation to emulate the specified compliance. To compensate the limited range of the system, the method of attaching the spring with various magnitude of stiffness to the system is adopted and its preliminary test is performed to confirm the validity of the method.