• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.4
• /
• pp.48-56
• /
• 2011

A Possibility of combustion instability on longitudinal mode has a high level at large scale of L/D. Solid propellant has a metal particle and a grain of control to pressure oscillation. Solid rocket motor in slotted-tube grain controls pressure oscillation of longitudinal mode. Slotted-tube grain restrains longitudinal 1st pressure oscillation. But cavity volume of aft. insulation ablation amplifies 2nd pressure o scillation by vortext shedding. A study has suppressed combustion instability and vortex shedding by modified 4 slotted tube solid rocket motor design.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.244-248
• /
• 2012

A series of hybrid rocket combustion experiments were carried out with PMMA/GOx changing diameter and length of the disk installed at pre-chamber. The disk can generate vortex shedding flow and change flow conditions prior to entering the fuel grain which could also alter the combustion characteristics and pressure oscillations. The interaction of vortex shedding in the pre-chamber and small-scale vortices adjacent to burning surfaces by using combustion test.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.10a
• /
• pp.355-359
• /
• 2001

In this study, experiments were carried out to investigate the characteristics of grinding and wear process of diamond wheel grinding ceramic materials. Normal component of grinding resistance of $AI_2O_3$ was less then that of $Si_3N_4$ and $ZrO_2$. It is because the resistance for grain shedding is less then that for layer formation. For the case of $Si_3N_4$ and $ZrO_2$, as the grain mesh number of wheel increases, the surface roughness decreases. For the case of $AI_2O_3$, the surface roughness does not decreases. For the case of $Si_3N_4$ and $ZrO_2$, grinding is carried out by abrasive wear processes. For the case of $AI_2O_3$, grinding is carried out by grain shedding process.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.2
• /
• pp.147-153
• /
• 1991

In order to clarify the varietal differences of grain shedding in 86 rice varieties with the diverse origin, a bundle of 10 panicles was fallen down on the bottom above 2m height, and several characters related to shattering were investigated. The ratio of grain shedding in the varieties from the Tongil types was the greatest (11. 29%), followed by the native and J aponica types (2.56, 0.17%). The breaking tensile and breaking bending strengths of the primary rachis-branch in the Tongil types were weaker than in the native and Japonica types with mean values of 217g and 20.5g, respectively. The fiber cells length of the primary rachis- branch in the Tongil types were shorter in the native and Japonica types. The ratio of grain shedding was significantly correlated with the breaking tensile and bending strengths of the primary rachis- branch, and fiber cell length.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.938-942
• /
• 2002

This paper has studied to obtain the grinding characteristics and optimal grinding renditions of ceramic materials in the grinding with diamond wheel by the experimental plan method. The load on wheel by varying the feed rate was related with the surface roughness due to the minute destruction phenomenon of grains for the Si$_3$${N^4} and Zr{O_2}$. The depth of cut is related with the surface roughness because the grinding is carried out by grain shedding process due to the brittle fracture phenomenon for the ${Al_2}{O_3}$. The major factors affecting the surface roughness and the optimum grinding conditions were obtained with minimum experiments using the experimental plan method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.155-159
• /
• 2002

This paper has studied to obtain the grinding characteristics and optimal grinding conditions of ceramics in the grinding with diamond wheel by Taguchi method. Feed rate was most important factor to the surface roughness. In the case of 4{Si_3}{N_4}$ and ${A1_2}{O_3}$, surface roughness value were small at 3m/min of feed rate. In the case of $ZrO_2$. surface roughness value was small at 4m/min of feed rate. Surface roughness have much influenced by major load for the :ii3N4 and $ZrO_2$. On the other hand, ${A1_2}{O_3}$ have more influenced by grain shedding of brittle fracture phenomenon. The major factors affecting the surface roughness and the optimum grinding conditions were obtained with minimum experiment using Taguchi method.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.8
• /
• pp.141-146
• /
• 2002

This paper has studied to obtain the grinding characteristics and optimal grinding conditions of ceramic materials in the grinding with diamond wheel by design of experiments. The load on wheel by varying the feed rate was related with the surface roughness due to the minute destruction phenomenon of grains for the $Si_3\;N_4\;and\;ZrO_2$. The depth of cut is related with the surface roughness because the grinding is carried out by grain shedding process due to the brittle fracture phenomenon for the $A1_2\;O_3$. The major factors affecting the surface roughness and the optimum grinding conditions were obtained with minimum experiments using design of experiments.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.35 no.3
• /
• pp.239-247
• /
• 1990

In order to investigate the degree of grain shedding of red rices collected in Korea, breaking tensile and breaking bending strengths of 269 varieties; 82 Korean and 100 foreign red rices and 87 Korean cultivars including 26 native varieties, 30 Japonica-Indica hybrids and 31 Japonica type varieties, were measured at harvest time. Also, histological characteristics of abscission region between spikelet and pedicel were observed. The breaking tensile and breaking bending strengths of both Korean and foreign red rices were weaker than those of Japonica-Indica hybrids which were known as easily shedding varieties in Korea. Abscission layers were observed in the majority of Korean red rices except for 5 varieties, and those of all varieties belonging to both long grain types and 'Sare's were cracked completely at harvest time, while those of round grain types were not cracked except one variety. The breaking tensile and breaking bending strengths of the tested varieties having cracked abscission layer were weaker than those of non-cracked ones. Both strengths of breaking tensile and breaking bending were positively correlated with diameter of supporting zone and thickness of sclerenchyma tissue surrounding central vascular tissue of suporting zone at 0.1% significant level, respectively.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1989.10a
• /
• pp.26-27
• /
• 1989

• International Journal of Aeronautical and Space Sciences
• /
• v.13 no.4
• /
• pp.507-514
• /
• 2012

The present study is the analyses of what has been attempted and what was understood in terms of improving the regression rate and enlarging the basic understanding of internal flow dynamics. The first part is mainly intended to assess the role of helical grain configuration in the regression rate inside the hybrid rocket motor. To improve the regression rate, a combination of swirl (which is an active method) and helical grain (which is a passive method) was adopted. The second part is devoted to the internal flow dynamics of hybrid rocket combustion. A large eddy simulation was also performed with an objective of understanding the origin of isolated surface roughness patterns seen in several recent experiments. Several turbulent statistics and correlations indicate that the wall injection drastically changes the characteristics of the near-wall turbulence. Contours of instantaneous streamwise velocity in the plane close to the wall clearly show that the structural feature has been significantly altered by the application of wall injection, which is reminiscent of the isolated roughness patterns found in several experiments.