• Title/Summary/Keyword: Grain Texture

Search Result 349, Processing Time 0.029 seconds

Geoacoustic Properties of Marine Sediment Adjacent the Southwestern Taean Peninsula, the Yellow Sea (황해 태안반도 남서부 해양퇴적물의 지음향 특성)

  • Kim, HwaRang;Kim, Dae-Choul;Seo, YoungKyo;Lee, Gwang-Soo;Kim, KyongO
    • Journal of the Korean Society for Marine Environment & Energy
    • /
    • v.19 no.4
    • /
    • pp.247-258
    • /
    • 2016
  • Physical and acoustic properties of sediment on the southwestern Taean Penisula, the Yellow Sea, were studied using eight piston cores. The sediments in the study area are largely composed of sand which has been deposited with sea-level change after LGM(Last Glacial Maximum). After the sea-level rise, fine-grained sediments discharged from Keum River and neighboring coast area were deposited as muddy sand or sandy mud. Results of these sedimentary environment in this area, the texture of sediments are different from place to place with variable horizontal and vertical distribution of physical and acoustic properties. Correlations among the physical, geoacoustic properties, and mean grain size show slight deviations from those of the South Sea in spite of similar pattern. This is probably due to the differences in sedimentary environment, mineral composition, and measurement system.

Vertical Distribution of Persistent Heavy metals in Core Sediments from Upo Wetland (자연습지 우포늪 퇴적물의 연도별 잔류성 중금속 축적도)

  • Lee, Chan Won;Boo, Min Ho;Jeon, Hong Pyo;Lim, Kyung Won;Kim, Ki Ho
    • Journal of Wetlands Research
    • /
    • v.10 no.3
    • /
    • pp.27-35
    • /
    • 2008
  • Sediment cores were obtained from Upo and Mokpo in Upo Wetland and core samples were divided by depth into 20 ~ 21 subsamples. The heavy metal concentrations of Fe, Mn, Zn, AS, Cu, Cd, Ni, Pb, and Cr in the sediments of each depth were determined by ICP-MS. The texture of sediemnts from Upo Wetland appeared to be clayey silt with average grain size of $7.52{\sim}11.15{\mu}m$ for physical properties. It was found to have a clear tendency of depth profile with respect to TOC and ignition loss. Organics were stabilized in the range of 0.5 ~ 0.7 % TOC and 8 ~ 9 % ignition loss in 30 years, whereas, the surficial sediments have the highest concentrations of about 3.0 % of TOC and 13 ~ 15 % ignition loss. Those are much higher than the values of the main stream, the Nakdong River, which reflects the deposit of biodegradable organics from plants and other lifes. The vertical distribution of heavy metals in two sediment cores was investigated to elucidate historical trends of heavy metals deposited into Upo wetland. The depth profile concentrations of each heavy metal were compared and discussed with the Concensus-Based Sediment Quality Guidelines for freshwater ecosystems. All the Cd data for the vertical distribution in the sediments were detected above PEC value for Cd, which predict harmful effects on sediment-dwelling organisms expected to occur frequently. The concentrations of Zn, Cu, and Cr in all sediment samples for depth profile were detected below the TEC values, which provided a basis predicting the absence of toxicity by Zn, Cu, and Cr.

  • PDF

Effect of surface scratching on Barkhausen Noise in 3% Silicon Steel (3% 방향성 규소강판의 표면 선긋기에 의한 Barkhausen Noise에 관한 연구)

  • 박창만;이기암;황도근
    • Journal of the Korean Magnetics Society
    • /
    • v.4 no.2
    • /
    • pp.142-149
    • /
    • 1994
  • The Barkhausen noise was measured as the change of line width(39~1.22 mm) and scratching angle($90^{\circ}~50^{\circ}$) with respect of rolling direction in grain-oriented 3 % Si-Fe of 0.30 and 0.27 mm thickness. The two peak phenomena of the noise envelope observed for non-scratching and scratching of line width 39 mm was explained by large activation energy during $180^{\circ}$ domain wall nucleation and annihilation processes. The amplitudes of the noise envelpoes were decreased as the decrement of scratching line width, but did not almost changed below line width of 9.75 mm. It was explained that the decrease in the envelope with increasing scratching number is associated with lower activation energy of $180^{\circ}$ domain nucleation and annihilation in the vicinity of the scratching area. The noise power was decreased as narrower line width. The dependence of the power on the scratching angle was sharpest decreaded at the 50 angle.

  • PDF

Comparison of starch properties of rice varieties in different eating quality

  • Yoon, Mi-Ra;Kwak, Jieun;Lee, Jeong-Heui;Lee, Jeom-Sig;Kim, Mi-Jung;Jung, Tae-Wook
    • Proceedings of the Korean Society of Crop Science Conference
    • /
    • 2017.06a
    • /
    • pp.295-295
    • /
    • 2017
  • Rice (Oryza sativa L.) is one of the most important food crops in the world. The eating quality of cooked rice is the most important trait japonica rice breeding in Korea. Rice varieties that produce kernels that are firm and fluffy after cooking are generally favored in countries such as India, Pakistan, and Indonesia. Whereas varieties with kernels that maintain its shape, glossiness, savory odor, stickiness, and tenderness when cooked are preferred in Korea. This study analyzed the major physicochemical components of rice grain associated with the eating quality of 20 japonica rice varieties. Physicochemical components such as the amylose content, protein content, amylographic characteristics of polished rice, and texture of cooked rice were tested using a Tensipresser as alternative indirect methods in determining rice eating quality. Evaluation of eating quality of cooked rice using sensory test was conducted with 20 well trained members. The 20 rice varieties in different eating quality showed amylose contents of 17~20%. The amylose content of rice varieties had negative correlation with peak viscosity, however positive correlation with setback viscosity was observed. The stickiness and adhesiveness of cooked rice showed correlation with the amylose content and amylopectin chain length distribution. Rice varieties with good eating quality showed less retrogradation of cooked rice and higher hot viscosity of rice flour in amylogram.

  • PDF

Distribution of Suspended Clay Minerals around the Kori Waters (고리 부근 현탁물중 점토광물의 분포에 관한 연구)

  • Kim Dae-Choul;Kim Jung-Moo
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.23 no.2
    • /
    • pp.145-154
    • /
    • 1990
  • Amounts of total suspended matter(TSM) around the Kori waters have been monitored for two years to understand the dispersal pattern of fine-grained sediment. Average concentration of the TSM is $3\~4\;mg/\iota$ in the surface and $3.5\~5\;mg/\iota$ in the near-bottom water. Semi-quantitative analysis for the four major clay minerals in TSM is also performed. The average relative abundance of each clay mineral such as illite, kaolinite, chlorite, and smectite is $65\%,\;17\%,\;17\%$, and $1\%$, respectively. It seems that the majority of recent fine-grained sediment deposited around the Kori area is derived from the Nakdong River. The texture of surface sediment is also dominated by fine-grained fraction leading up to $90\%$ of silt and clay content. The grain size decreases seaward progressively.

  • PDF

Studies on the Effect of the Application of Fused Phosphate on Yield of Rice in Sandy Paddy Field (Very Rapid Permerbitily) (사질누수답에 있어서 용성인비의 시용이 수도수량에 미치는 영향)

  • Sang-Suk Chae;Yung-Seon Chang;Hwa-Soo Lee
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.14
    • /
    • pp.71-77
    • /
    • 1973
  • To observe the effect of fused phosphate fertilization, as a soil improvement material, in low productive paddy field which has rapid permeable sandy-skeletal texture, this experiment was carried out under five different levels of fused phosphate. The results obtained are briefly as follows: 1. Rice, grown in areas receiving annual fused phosphate application of from 200 to 250kg per 10a showed yield increases of about 10 to 27 percent based on 1, 000 grain weight of brown rice. Other favorable effects from high fused phosphate applications include increased number of panicles, faster ripening rate of the rice, and lower infection rate of blast. 2. In the soil analysis after the experiment, the useful soil chemical properties, such as available phosphate, silica, soil pH, exchangeable calcium, magnesium, and base saturation were increased significantly. The exchangeable potassium, however, was not changed noticeably. 3. The relation between the major soil chemical properties, especially available phophate and silica, and yield component which directly effect yields, showed a significant correlation statistically.

  • PDF

Effects of composition of preannealed Y-Ba-Cu-0 thin films deposited by sputtering on the superconducting properties and microstructure of post-annealed thin films (스퍼터링 증착된 Y-Ba-Cu-O계 박막의 열처리 전 조성이 열처리 후 박막의 초전도특성 및 미세구조에 미치는 영향)

  • Cho, Hae-Seok;Kim, Hyeong-Jun
    • Korean Journal of Materials Research
    • /
    • v.1 no.1
    • /
    • pp.54-61
    • /
    • 1991
  • YBCO films deposited on MgO(100) and Si(100) by rf-magnetron sputtering using stoichiometric single target were annealed under oxygen atmosphere at $880^{\circ}C$ for 1 hr. The microstructure and superconducting properties of YBCO thin films depended on the composition of pre-annealed thin films. Basal planesuperconducting particles grown on MgO(100) substrate had small and rod-like shade due to preferred orientation, while superconducting film grown on the basal plane-superconducting particles showed round-shape particles. If pre-annealed thin film had nonstoichiometric composition, liquid phase was formed during the heat treatment, which made it easy for particles to grow in the preferred orientation and thus to form textured structure. But the thin films with the textured structure did not show good superconducting properties, especially $T_c$, since the liquid phase transformed into second phase in the grain boundary during the cooling. The effect of the second phase on $T_{c, \;zero}$ was greater than that on $T_{c, \;on}$.

  • PDF

Petrological Study on the Jecheon granite mass (제천(提川) 화강암체(花崗岩體)에 대(對)한 암석학적(岩石學的) 연구(硏究))

  • Kim, Yong Jun
    • Economic and Environmental Geology
    • /
    • v.12 no.3
    • /
    • pp.115-126
    • /
    • 1979
  • The Jecheon granite mass has turtle-shape exposure of about $190km^2$ at vicinity of Jecheon-eup, and is elongated in the direction of NEE-SWW. It discordantly intrudes the Bakdalryong metamorphic rocks and the great limestone series(Samtaesan and Hungwolri formation) which belong to the pre-Cambrian and Ordovician, respectively. The mass is composed of five facies of different grain size; texture and charecteristic minerals. The five facies are (1) coarse grained biotite granodiorite, (2) fine grained hornblende biotite granodiorite, (3) coarse grained pink feldspar granodiorite (4) leucogranite, and (5) porphyritic biotite granite. The mutual relationship between each facies is intrusion in (1)-(2) and (2)-(3), but unknown in (3)-(4) and (4)-(5). 22 modal analyses and and 10 chemical analyses on more than a hundred of representative samples taken from the mass are listed as tables. Triangular plot of modal and normative Q-Kf-Pl of this mass show a continuous differentiation products from certain common magma by change of chemical composition and anorthite contents in plagioclase. The metamorphic facies of contact aureole in surrounding rocks adjacent to the granite body are corresponded to hornblende hornfels facies with mineral assemblages of wollastonite-diopside-calcite in calcareous rocks, and of quartz-biotite-muscovite-cordierite in argillaceous rocks. Variation of silica versus oxides of major elements shows that the mass is similar to the trend of Daly's average basalt-andesite-dacite-rhyolite which shows the trend of the fractional crystallization of magma, and is equivalent to the calc-alkali rock series by Peacock. AMF diagram shows that Jecheon granite mass is equivalent to normal diffentiation products such as skaergaard intrusion. The above evidences suggest that the Jecohon granite mass is normal differentiation products formed by fractional crystallization under relatively slow cooling condition.

  • PDF

Effect of Cooking Methods on the Qualities of Quick Cooking Rice (취반방법이 즉석쌀밥의 품질에 미치는 영향)

  • Kim, Jeong-Sang;Lee, Hyun-Yu;Kim, Yung-Myung;Shin, Dong-Hwa
    • Korean Journal of Food Science and Technology
    • /
    • v.19 no.6
    • /
    • pp.480-485
    • /
    • 1987
  • Quick cooking rice was produced by cooking raw, white long grain rice with three different methods which were atmospheric cooking in electric cooker, autoclaving and precooking followed by autoclaving. The drying rate curve showed that cooking methods affected little the drying pattern of the cooked rice except that precooking treatment before autoclaving retarded dehydration. The quick cooking rice prepared by precooking and autoclaving method among three cooking methods showed the fastest rehydration rate and took 7.5 minutes in reaching equilibrium moisture content by soaking in boiling water. And it had less hard and more cohesive texture than the milled rice cooked by conventional method and the quick cooking rice prepared by electric cooking when reconstituted. The microstructure of quick cooking rice was investigated among cooking methods.

  • PDF

Effects of Processing Methods on the Quality of the Dehydrated Instant Rice (건조 Instant Rice의 제조방법이 제품의 품질에 미치는 영향)

  • Lee, Young-Chun;Lee, Dong-Woo
    • Korean Journal of Food Science and Technology
    • /
    • v.21 no.2
    • /
    • pp.294-299
    • /
    • 1989
  • The quality of dehydrated instant rice produced by a few selected processing methods with short grain milled rice was evaluated. Instant rice produced by process 2 had high rehydration rate, and those by processes 1 and 2 revealed light brown color with less lightness. Instant rice produced by processes 1 and 2 with ammonium carbonate treatment had more uniform porous microstructure, as shown by SEM micrographes, and microstructural difference was noticed between instant rice prepared with government rice and Akibari. Instant rice produced by processes 1 and 2 had less sensory color score, and those by processes 2 and 4 had higher sensory cohesiveness. Overall quality of instant rice produced by process 2 was better, except color.

  • PDF