• 한국측량학회지
• /
• 제36권3호
• /
• pp.117-126
• /
• 2018

Due to intelligent transport systems, location-based applications, and augmented reality, demand for image maps and 3D (Three-Dimensional) maps is increasing. As a result, data acquisition using UAV (Unmanned Aerial Vehicles) has flourished in recent years. However, even though orthophoto map production and research using UAVs are flourishing, few studies on 3D modeling have been conducted. In this study, orthophoto and 3D modeling research was performed using various angle images acquired by a UAV. For orthophotos, accuracy was evaluated using a GPS (Global Positioning System) survey that employed VRS (Virtual Reference Station) acquired checkpoints. 3D modeling was evaluated by calculating the RMSE (Root Mean Square Error) of the difference between the outline height values of buildings obtained from the GPS survey to the corresponding 3D modeling height values. The orthophotos satisfied the acceptable accuracy of NGII (National Geographic Information Institute) for a 1/500 scale map from all angles. In the case of 3D modeling, models based on images taken at 45 degrees revealed better accuracy of building outlines than models based on images taken at 30, 60, or 75 degrees. To summarize, it was shown that for orthophotos, the accuracy for 1/500 maps was satisfied at all angles; for 3D modeling, images taken at 45 degrees produced the most accurate models.

• 무역학회지
• /
• 제45권5호
• /
• pp.239-260
• /
• 2020

This research was conducted on 176 GVCs-related research papers listed in the Index of Korean Academic Writers. The analysis methodology used the keyword network analysis methodology of big data analysis. For the comprehensive analysis of research trends, the research trends through word frequency (TF), important topic (TF-IDF), and topical modeling were analyzed in 176 papers. In addition, the research period of GVCs was divided into the early stages of the first study (2003-2014), the second phase of the study (2015-2017), and the third phase of the study (2018-2020). According to the comprehensive analysis, the GVCs research was conducted with the keyword 'value added' as the center, focusing on the keywords of export (trade), Korea, business, influence, and production. Major research topics were 'supporting corporate cooperation and capacity building' and 'comparative advantage with added value of overseas direct investment'. According to the analysis of major period-specific research trends, GVCs were studied in the early stages of the first phase of the study with global value chain trends and corporate production strategies. In the second research propulsion period, research was done in terms of trade value added. In the recent third phase of the study, small and medium-sized enterprises actively participated in the global value chain and actively researched ways to support the government. Through this study, the importance of the global value chain has been confirmed quantitatively and qualitatively, and it is recognized as an important factor to be considered in the strategy of enhancing industrial competitiveness and entering overseas markets. In particular, small and medium-sized companies' participation in the global value chain and support measures are being presented as important research topics in the future.

• 한국수자원학회논문집
• /
• 제53권7호
• /
• pp.545-555
• /
• 2020

본 연구에서는 해외 수력댐 건설 프로젝트의 사전조사 기초자료 제공을 위하여 댐 위치 결정을 위한 사전적지분석 알고리즘을 개발하고, 위성영상 수치표고자료인 ASTER Global Digital Elevation Model (ASTGTM)과 토지피복자료인 Terra/Aqua combined Moderate Resolution Imaging Spectroradiometer (MODIS) MCD12Q1를 사용하였다. 사전적지분석 알고리즘은 DEM의 전처리, 하천망생성, 유역분할과 지형정보를 고려한 적지분석과 댐 건설 시 수몰면적에 따른 보상면적 산정 알고리즘을 포함하고 있으며 Python기반의 오픈소스 GIS로 구현되었다. 적지분석은 사용자가 하천 위의 지점을 선택하면, DEM으로부터 낙차, 도달시간, 내용적곡선과 같은 지형정보와 토지피복자료를 통한 보상면적을 기반으로 지점의 적지여부를 평가한다. 분석알고리즘은 국내 부항, 보현산, 성덕, 영주댐을 대상으로 시범적용 됐으며 해당 지점의 가능 최대낙차는 각각 37, 67, 73, 42 m로 나타났으며 최대저수면적은 1.81, 2.4, 2.8, 8.8 ㎢ 최대저수량은 35.9, 68, 91.3, 168.3×10⁶ ㎥으로 나타났다. 보현산과 성주 댐에서는 타당성을 보였으나, 부항과 영주 댐의 경우 ASTGTM 에러로 인한 잘못된 하천망과 유역경계로 인해 낙차가 제한됨을 보였다, 본 연구의 결과는 향후 해외 수력댐 사업 진출시 사전분석에서 적지의 지형학적 평가에 도움이 될 것으로 기대된다.

• Smart Structures and Systems
• /
• 제22권5호
• /
• pp.575-586
• /
• 2018

Computational Building Information Modeling (BIM) is an intelligent 3D model-based process that provides architecture, engineering, and construction professionals the insight to plan, design, construct, and manage buildings and infrastructure more efficiently. This paper aims at using BIM in Hospitals configurations protection. Infrastructure projects are classified as huge structural projects taking advantage of many resources such as finance, materials, human labor, facilities and time. Immense expenses in infrastructure programs should be allocated to estimating the expected results of these arrangements in domestic economy. Hence, the significance of feasibility studies is inevitable in project construction, in this way the necessity in promoting the strategies and using global contemporary technologies in the process of construction maintenance cannot be neglected. This paper aims at using the building information modeling in covering Imam Khomeini Hospital's equipment. First, the relationship between hospital constructions maintenance and repairing, using the building information modeling, is demonstrated. Then, using library studies, the effective factors of constructions' repairing and maintenance were collected. Finally, the possibilities of adding these factors in Revit software, as one of the most applicable software within BIM is investigated and have been identified in some items, where either this software can enter or the software for supporting the repairing and maintenance phase lacks them. The results clearly indicated that the required graphical factors in construction information modeling can be identified and applied successfully.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1870-1873
• /
• 2004

The objective of this study is to investigate the possibility of chemical process synthesis purely based on mathematical programming when given an objective, feed conditions, product specifications, and model equations for available process units. A method based on a state space approach is proposed, and applied to an example problem with a reactor, a heat exchanger, and a separator. The results indicate that a computer can automatically synthesize an optimal process without any heuristics or expertise in process design provided that global optimization techniques are improved to be suitable for large problems.

• Journal of Information Technology Applications and Management
• /
• 제10권3호
• /
• pp.55-74
• /
• 2003

Due to the evolution of computer systems and the proliferation of Internet, numerous information resources have been constructed. The deluge of information makes the need to integrate information, which are distributed on the internet and are handled in heterogeneous systems. Recently, most of the XML -based information integration systems use XML DTD(Document Type Definition) for describing integrated global schema. However, DTD has some limitations in modeling local information resources such as datatypes. Although W3C's XML Schema is more flexible and powerful than XML DTD in specifying integrated global schema, it has more complex problems in resolving conflicts than using DTD. In this paper, we provide a taxonomy of conflict problems in integration information resources using XML Schema, and propose conflict resolution mechanism using XQuery.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권2호
• /
• pp.218-228
• /
• 2003

A hydraulic system is modeled as the second order differential equation with uncertain system parameters and disturbance composed of modeling errors. To Position the load of the hydraulic system to a desired point. the servo valve of the hydraulic system is controlled. As a control scheme. a global sliding mode control(GSMC) is Proposed Since the servo valve has a torque limit. the GSMC is designed to coordinate the position of the load along the minimum time trajectory within the torque limit. The Proposed control scheme can be designed with ranges of parametric uncertainties and specified torque limits. By the proposed control scheme, the closed form solution of the arriving time at the desired position can be estimated.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.672-676
• /
• 2003

Recently, the importance of ship vibration is emerging due to the large scaling, high speed and lightning of ship. For pleasantness in a cabin, shipbuilders ask for strict vibration criteria and the degree of vibration level at a deckhouse became an important condition for taking order from customers. This study conducted optimum design to attenuate vibration level of a deckhouse to solve above problems. New method was implemented, that is NASTRAN external call type independence optimization method. The merit of this method is global searching after setting various object functions and design variables. The global optimization algorithm used here is R-Tabu search method, which has fast converging time and searching various size domains. By modeling similar type to ship structure, validity of the suggested method was investigated.

• 한국자동차공학회논문집
• /
• 제20권2호
• /
• pp.103-109
• /
• 2012

Adaptive cruise control Stop&Go system has been developed to reduce the driver's workload on highway or public road. This system is characterized by a moderate control of engine and brake actuator. A control system capable of modeling driver's driving characteristics has been constructed to provide natural vehicle behavior in full speed driving. But, ACC Stop&Go system has some limitations. One of the limitations is a detection limitation on near cut-in situation. This paper presents development of the near cut-in test procedure, finding of the limitation value on near cut-in scenario and performance comparisons on ACC Stop&Go system.

• 대한안전경영과학회지
• /
• 제15권1호
• /
• pp.209-216
• /
• 2013

RFID/USN, are recognized as the new growth engines for the future, regardless of the advanced and developing countries. RFID, in particular, already entered practical stage by global companies. EPCIS, which is the one of the EPC golabal network components, makes a huge load on the system due to the large amount of entering data by following events. In this study, a data model developed based on ER-WIN by collecting four kind information that occurred in the EPC global networks. This model supports both in processing of high performance and huge capacity of data by a considerable storage capacity and input speed. A simulation was developed in order to verify the performance. Each model tested several times and results were compared.