• International Journal of Costume and Fashion
• /
• v.10 no.2
• /
• pp.61-71
• /
• 2010

The purpose of this study was first, to examine the causes for the recent acceleration in the increase of textile/apparel waste and the current practices for reducing waste in the global textile and apparel industry; and second, to explore the influence of sustainability and social responsibility on fashion trends. Extensive literature on sustainable apparel and sustainable and socially responsible practices by global textile and apparel firms was reviewed in conducting this research. First, an accelerated fashion diffosion speed due to fast fashion was focused on as a cause for the increase in textile/apparel waste whereas mass customization was focused on as a potential solution for reducing waste. Then, the influence of the social trend toward sustainability and social responsibility on fashion trends was discussed, particularly the trends toward green products and recycled fashion, the trend against using real for or leather, and minimum-fabric-waste fashion in design and product development. This study furthers consumers' understanding of sustainability and social responsibility related to fashion trends and hopefully increases their consciousness in becoming socially responsible consumers. This study will also contribute to better decision-making in apparel and textile firms to produce sustainable fashion products.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.10
• /
• pp.907-914
• /
• 2004

In this paper, we present a reduced-order observer for a class of nonlinear systems based on the input output linearization. While the most results in the literature presented full-order nonlinear observer, we proposed a procedure for the design of reduced-order observer far nonlinear systems that are not necessarily observable. Assuming that there exists a global observer fer internal dynamics and that certain functions are globally Lipschitz, we can design a global reduced-order observer An illustrative example is included that demonstrate the design procedure of the proposed reduced-order observer.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2017.01a
• /
• pp.161-162
• /
• 2017

외부환경을 인식하고 상황을 판단해 자율적으로 행동하는 지능형 서비스 로봇은 앞으로 새로운 시장을 열어줄 것으로 기대되며 이와 관련된 연구와 개발이 빠르게 확대되고 있다. 이러한 서비스 로봇에게 가장 중요한 기능은 인간과의 원활한 상호작용이다. 여기서 말하는 상호작용이란 단순히 인간이 원하는 것을 명령하고, 로봇이 이 명령을 수행하는 것에 그치는 것이 아니라, 로봇이 스스로 인간의 감정을 파악하고, 이에 대한 적절한 로봇 자신의 감정 표출이나 서비스, 행동을 제공함으로써 직접적인 소통이 이루어지는 것을 의미한다. 이렇게 로봇이 자연스럽게 인간과 함께 공존하기 위해서 감성 로봇(Emotional Robot) 분야에서 관련된 연구가 활발히 진행되고 있다 본 논문에서는 국내의 감성 로봇의 연구 현황과 발전 방향에 대해 서술한다.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.8
• /
• pp.54-63
• /
• 1993

This paper proposes a method for improving the performances of the neural network for optimization by an optimal estimation of initial states. The optimal initial state that leads to the global minimum is estimated by using the stochastic approximation. And then the update rule of Hopfield model, which is the high speed deterministic algorithm using the steepest descent rule, is applied to speed up the optimization. The proposed method has been applied to the tavelling salesman problems and an optimal task partition problems to evaluate the performances. The simulation results show that the convergence speed of the proposed method is higher than conventinal Hopfield model. Abe's method and Boltzmann machine with random initial neuron output setting, and the convergence rate to the global minimum is guaranteed with probability of 1. The proposed method gives better result as the problem size increases where it is more difficult for the randomized initial setting to give a good convergence.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.7
• /
• pp.1665-1674
• /
• 1995

An optimum design has been performed to maximize specific energy (SED) of composite flywheel rotor for energy storage system. The flywheel rotor is assumed to be an axisymmetric thick laminated shell with a plane strain state for structural analysis. For the structural analysis the centrifugal force is considered and the stiffness matrix equation was derived for each ring considering the interferences between the rings. The global stiffness matrix was derived by integrating the local stiffness matrix satisfying the conditions of force and displacement compatibilities. Displacements are then calculated from the global stiffness matrix and the stresses in each ring are also calculated. 3-D intra-laminar quadratic Tsai-Wu criterion is then used for the strength analysis. An optimum procedure is also developed to find the optimal interferences and lay up angle to maximize SED using the sensitivity analysis.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.49 no.8
• /
• pp.407-414
• /
• 2000

This paper addresses the analysis and design of fuzzy control systems for a class of complex uncertain single-input single-output nonlinear systems. The proposed method represents the nonlinear system using a Takagi-Cugeno fuzzy model and construct a global fuzzy logic controller by blending all local state feedback controllers with a sliding mode controller. Unlike the commonly used parallel distributed compensation technique, we can design a global stable fuzzy controller without finding a common Lyapunov function for all local control systems, and can obtain good tracking performance by using sliding mode control theory. Furthermore, stability analysis is carried out not for the fuzzy model but for the real nonlinear system with uncertainties. Duffing forced oscillation sysmte is used as an example to show the effectiveness and feasibility of the proposed method.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.12
• /
• pp.1716-1726
• /
• 2002

본 연구는 국제의류사슬 내 수출위치를 단순조립 생산 (Mere-Assembly Production), 주문자 상표부착 생간방식 (Origin Equipment Manufacturing), 고유상표 생산방식 (Original Brand Name Manufacturing)으로 규명하고, 각 국가의 의류사슬 내 수출 위치가 수입 단가에 어떠한 영향을 미치는지 조사하였다. 1999년 미국Department of commerce의 무역 자료를 사용하여 국제 의류사슬 내 각각의 위치를 점하고 있는 방글라데시, 홍콩, 한국, 이태리를 비교한 결과, 의류사슬 내 위치에 따라 이들 국가로부터의 섬유 및 의류제품의 미국 내 수출단가가 통계 적으로 유의 한 차이를 보이는 것으로 나타났다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.1 no.2
• /
• pp.39-52
• /
• 1995

There are numerous mapping, charting, geodetic systems and electronic digital products defined in various local geodetic datum. It becomes a straight forward requirement to simplify the complexity by referencing all the products to a common reference globally. WGS-84 is well known as a state-of-the-art global reference system based on the use of data, techniques and technology available within American Defence Mapping Agency(DMA). Its parameters can be translated into more accurate maps, charts and geodetic positioning compared to others previously. Since Global Positioning System(GPS/NAVSTAR), which is asssociated with World Geodetic System(WGS-84)in reference frame, has been widely used, the unified geodetic system has been required for GPS users in many fields.

• Research in Mathematical Education
• /
• v.16 no.3
• /
• pp.177-194
• /
• 2012

What strategies are used to help students understand quadratic functions in mathematics classroom? In specific, how does Chinese teacher highlight a connection between algebraic representation and graphic representation? From October to November 2009, an experienced teacher classroom was observed. It was found that when students started learning a new type of quadratic function in lessons, the teacher used two different teaching strategies for their learning: (1) Eliciting students to plot the graphs of quadratic functions with pointwise approaches, and then construct the function image in their minds with global approaches; and (2) Presenting a specific mathematical problem, or introducing conception to elicit students to conjecture, and then encouraging them to verify it with appoint approaches.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.1 no.1
• /
• pp.60-71
• /
• 1999

The micrometeorological tower flux network is the cornerstone of the global terrestrial vegetation monitoring. The eddy covariance technique used for tower fluxes is derived from the conservation of mass and is most applicable for steady-state conditions over flat, extended, and uniform vegetation. This technique allows us to obtain surface fluxes of energy budget components, greenhouse and trace gases, and other pollutants. The quality-controlled flux data are invaluable to validate various models with temporal scales ranging from minutes to years and spatial scales ranging from a few meters to hundreds of kilometers. In this paper, we review the theoretical background of this important eddy covariance technique, examine the measurement criteria and corrections, and finally suggest some measurement strategies that may facilitate coordinated flux measurements among different disciplines and provide a strong infrastructure for the global flux network.