• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.4
• /
• pp.110-121
• /
• 2009

It is essential to embed product quality in the design process to win the global competition. Many components found in many products including automobiles and electronic devices are fabricated using sheet metal forming processes. Wrinkle and fracture are two types of defects frequently found in the sheet metal forming process. Reducing such defects is a hard problem as they are affected by many uncontrollable factors. Attempts to solve the problem based on traditional deterministic optimization theories are often led to failures. Furthermore, the wrinkle and fracture are conflicting defects in such a way that reducing one defect leads to increasing the other. Hence, it is a difficult task to reduce both of them at the same time. In this research, a new design method for reducing the rates of conflicting defects under uncontrollable factors is presented by using operating window and a sequential search procedure. A new SN ratio is proposed to overcome the problems of a traditional SN ratio used in the operating window technique. The method is applied to optimizing the robust design of a sheet metal forming process. To show the effectiveness of the proposed method, a comparison is made between the traditional and the proposed methods using simulation software, applied to a design of particular sheet metal forming process problem. The results show that the proposed method always gives a more robust design that is less sensitive to noises than the traditional method.

• Journal of Power Electronics
• /
• v.16 no.2
• /
• pp.631-642
• /
• 2016

Usually, the output characteristics of a photovoltaic (PV) array are significantly affected by non-uniform irradiance which is caused by ambient obstacles, clouds, orientations, tilts, etc. Some local maximum power points (LMPP) in the current-voltage (I-V) curves of a PV array can result in power losses of the array. However, the output power at the global maximum power point (GMPP) is different in different interconnection schemes in a PV array. Therefore, based on the theoretical analysis and mathematical derivation of different topological structures of a PV array, this paper investigated the output characteristics of dual series PV arrays with different interconnections. The proposed mathematical models were also validated by experimental results. Finally, this paper also concluded that in terms of performance, the total cross tied (TCT) interconnection was not always the optimal structure, especially in a dual series PV array. When one of the PV modules was severely mismatched, the TCT worked worse than the series parallel (SP) structure. This research can provide guidance for switching the interconnection to gain the greatest energy yield in a changeable- structure PV system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.3
• /
• pp.660-672
• /
• 2007

Today venture holds highly skilled technical manpower and high-tech products. To maintain the superiority in competition in the market, it is necessary to complete preparations, first of all, the effectual global marketing strategy should take precedence over the others. Therefore, this research is based on the research report of the special feature, the state of affairs and marketing strategy of venture business and is made up the questionnaire to interview total 200 companies of venture that was registered in Dec. 2006 and then is made the analysis of relevance of the statistical data of 154 companies of them and set up a hypothesis. As the result of it, it is set up two hypotheses. One of them is the difference of products, price, distribution and promotion according to the growth period. And the other is the difference of distribution and promotion according to the turnover. The venture places the great deal of weight on the discriminatory products concerned technical development and marketing activity. It is pointed out that it is to be passive to seek a new market promote the products, because of limitations of manpower, funds, technology and information in the beginning with smalt turnover.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.3
• /
• pp.557-565
• /
• 2015

Sea level rise due to global warming causes seawater intrusion into aquifers in coastal areas. Seawater intrusion vulnerability index was developed using PSR (Pressure, State, Response) model and analysis hierarchy process (AHP). Coastal regions in Korea, Gangwon-do Sokcho-si, Incheon-si Ganghwa-gun, Chungcheongnam-do Taean-gun, Jeollanam-do Yeosu-si, Jindo-gun were chosen and 14 indicators were selected by considering the humanities, economic, social, environmental aspects. Re-scaling method was used for the standardization of indices and questionnaire survey was performed to calculate weight values for each index. The results showed that Yeosu-si was selected as the most vulnerable region to seawater intrusion. The seawater intrusion index developed in this research can be used to analyze the vulnerable regions to seawater intrusion and to establish a policy to minimize the seawater intrusion problems in coastal regions.

• The Journal of the Korea Contents Association
• /
• v.15 no.6
• /
• pp.589-596
• /
• 2015

The purpose of this study was (1) to examine the present state of English education for the 2018 Pyeongchang Winter Olympics preparations, and (2) to identify the need for an English language training program for international sports events. With these goals in mind, the information was gathered from telephone interviews with educational administration officials who were responsible for international sporting events. For the survey, a total of twenty-six participants responded to a questionnaire designed to gauge their self-perceived English instructional needs for international sporting events. The principal results obtained from this study were: the Pyeongchang Organizing Committee for the 2018 Winter Olympic Games signed an agreement with an official supplier of language training services. In addition, Gangneung city is providing a 'Global Leaders' Academy' and English programs for taxi drivers and citizens. The result of the survey shows that the majority of participants reported that an English language training program is essential for international sporting events and it should be different from general English language education.

• The Journal of the Korea Contents Association
• /
• v.19 no.11
• /
• pp.593-602
• /
• 2019

The healthcare industry, a high-value-added business, continues to grow with the aging of the population and the development of convergence medical technology. In particular, the medical tourism industry is being pushed by advanced countries. Korea is also actively supporting projects to attract international patients. However, there is a lack of prior research on Korea's medical interpreter policy. This study analyzes the current status and problems of medical interpreter policy for international patients, and presents the task. Problems include insufficient policy control towers, lack of links with local governments, lack of expertise of medical interpreters, poor quality of medical interpreting services, and poor treatment of medical interpreters. As improvement measures, it is proposed to establish a policy control tower, strengthen the link with local governments, switch to a medical interpreter system, diversify the language of medical interpreting qualification test, improve the quality of medical interpreting service, internalize the training process for medical interpreter, give preferential treatment to medical interpreters, utilize the nurse, and train multicultural medical personnel. I hope that this study will contribute to the development of the medical tourism industry.

• Journal of Astronomy and Space Sciences
• /
• v.35 no.3
• /
• pp.185-193
• /
• 2018

Jang Bogo Station (JBS), the second Korean Antarctic research station, was established in Terra Nova Bay, Antarctica ($74.62^{\circ}S$ $164.22^{\circ}E$) in February 2014 in order to expand the Korea Polar Research Institute (KOPRI) research capabilities. One of the main research areas at JBS is space environmental research. The goal of the research is to better understand the general characteristics of the polar region ionosphere and thermosphere and their responses to solar wind and the magnetosphere. Ground-based observations at JBS for upper atmospheric wind and temperature measurements using the Fabry-Perot Interferometer (FPI) began in March 2014. Ionospheric radar (VIPIR) measurements have been collected since 2015 to monitor the state of the polar ionosphere for electron density height profiles, horizontal density gradients, and ion drifts. To investigate the magnetosphere and geomagnetic field variations, a search-coil magnetometer and vector magnetometer were installed in 2017 and 2018, respectively. Since JBS is positioned in an ideal location for auroral observations, we installed an auroral all-sky imager with a color sensor in January 2018 to study substorms as well as auroras. In addition to these observations, we are also operating a proton auroral imager, airglow imager, global positioning system total electron content (GPS TEC)/scintillation monitor, and neutron monitor in collaboration with other institutes. In this article, we briefly introduce the observational activities performed at JBS and the preliminary results of these observations.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.572-578
• /
• 2003

The free vibration of a spinning flexible disk-spindle system supported by hydro dynamic bearings in a HDD is analyzed by FEM. The spinning flexible disk is described using Kirchhoff plate theory and von Karman non-linear strain, and its rigid body motion is also considered. It is discretized by annular sector element. The rotating spindle which includes the clamp, hub, permanent magnet and yoke, is modeled by Timoshenko beam including the gyroscopic effect. The flexible supporting structure with a complex shape which includes stator core, housing, base plate, sleeve and thrust pad is modeled by using a 4-node tetrahedron element with rotational degrees of freedom to satisfy the geometric compatibility. The dynamic coefficients of HDB are calculated from the HDB analysis program, which solves the perturbed Raynolds equation using FEM. Introducing the virtual nodes and the rigid link constraints defined in the center of HDB, beam elements of the shaft are connected to the solid elements of the sleeve and thrust pad through the spring and damper element. The global matrix equation obtained by assembling the finite element equations of each substructure is transformed to the state-space matrix-vector equation, and the associated eigenvalue problem is solved by using the restarted Arnoldi iteration method. The validity of this research is verified by comparing the numerical results of the natural frequencies with the experimental ones. Also the effect of supporting structures to the natural modes of the total HDD system is rigorously analyzed.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.6_1
• /
• pp.545-555
• /
• 2007

3D buildings are the most prominent feature comprising urban scene. A few of mega-cities in the globe are virtually reconstructed in photo-realistic 3D models, which becomes accessible by the public through the state-of-the-art online mapping services. A lot of research efforts have been made to develop automatic reconstruction technique of large-scale 3D building models from remotely sensed data. However, existing methods still produce irregular building polygons due to errors induced partly by uncalibrated sensor system, scene complexity and partly inappropriate sensor resolution to observed object scales. Thus, a geometric regularization technique is urgently required to rectify such irregular building polygons that are quickly captured from low sensory data. This paper aims to develop a new method for regularizing noise building outlines extracted from airborne LiDAR data, and to evaluate its performance in comparison with existing methods. These include Douglas-Peucker's polyline simplication, total least-squared adjustment, model hypothesis-verification, and rule-based rectification. Based on Minimum Description Length (MDL) principal, a new objective function, Geometric Minimum Description Length (GMDL), to regularize geometric noises is introduced to enhance the repetition of identical line directionality, regular angle transition and to minimize the number of vertices used. After generating hypothetical regularized models, a global optimum of the geometric regularity is achieved by verifying the entire solution space. A comparative evaluation of the proposed geometric regulator is conducted using both simulated and real building vectors with various levels of noise. The results show that the GMDL outperforms the selected existing algorithms at the most of noise levels.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.2
• /
• pp.153-159
• /
• 2016

Rivers refer to either natural or artificial structures whose primary functions are flood control and water conservation. Due to recent localized torrential downpours led by climate change, large amounts of eroded soil have been carried away, forming deposits downstream, which in turn degrades the capacity to fulfill these functions. To manage rivers more effectively, we need data on riverbed erosion and deposition. However, environmental factors make it challenging to take measurements in rivers, and data errors tend to prevent researchers from grasping the current state of erosions and deposits. In this context, the aim of the present study is to provide basic data required for river management. To this end, the author made annual measurements with a Real-time Kinematic-Global Positioning System (RTK-GPS) and a total station in Pats Cabin Canyon, Oregon, United States, and also prepared thematic maps of erosion and deposition thickness as well as water depth profiles based on a GIS spatial analysis. Furthermore, the author statistically analyzed the accuracy of three dimensional (3D) measurement points and only used the data that falls within two standard deviations (i.e. ±2σ). In addition, the author determined a threshold for a DEM of Difference (DoD) by installing measurement points in the rivers and taking measurements, and then estimated erosion and deposition thickness within a confidence interval of ±0.1m. Based on the results, the author established reliable data on river depth profiles and thematic maps of erosion and deposition thickness using pre-determined work flows. It is anticipated that the riverbed data can be utilized for effective river management.