• Journal of the Korea Institute of Building Construction
• /
• v.18 no.4
• /
• pp.375-384
• /
• 2018

Due to the downturn in the local construction business, entry into the overseas markets has been regarded as one of the core tasks of the building sector and the government. Thus, entry into overseas markets, not only by large and middle-standing enterprises, but also by small and medium sized enterprises, has recently become a major construction policy. Therefore, this study identified and evaluated overseas construction support policies in the field of construction engineering, ranked them as the policies for developing market development funds, fostering and educating expert workers, and supporting the provision of information on winning orders. Through these policy assessment results, the study proposed improvement measures from the government and from the business side. As for the government viewpoint, a measure of providing information suited to engineers in design companies, project manager (PM), construction manager (CM), a measure of producing skillful workers through the expansion of education support policies, and the promotion of specialized overseas workforce in the construction engineering sector were proposed. In the construction engineering industry, this study suggested measures for securing global expert manpower, sharing performance of overseas construction market development project, strengthening construction project management capacity, and strengthening risk management.

• Design & Manufacturing
• /
• v.12 no.2
• /
• pp.27-33
• /
• 2018

Korea's automobile industry, which has grown rapidly to become the world's fifth-largest automobile producer, To cope with environmental pollution and energy problems in order to prevail competitive edge in global market We are investing a lot of research personnel and costs. Among them, for realizing alternative light weight It is a part of the automobile module system that has achieved the technological development before the breakthrough in the injection molding process in the press process. Door module PNL was the subject of research. The door module PNL is expected to cause warpage before the mold production due to the thin and flat product characteristics and fiber orientation characteristic of the material. In this paper, CAE analysis and reverse correction tool Design. CAE analysis to obtain the results of weld line position, bending position and deformation value Through the correction tool, think3, the original product was modified before the mold production to improve the completeness of the parts. In fiber orientation, the position and size of the cooling channel in the mold, the position and size of the gate, Temperature, pressure, time, and work environment. Compared with the result of CAE analysis, the product that was reverse-corrected by Think3 was manufactured, and injection molding was performed. Injection molding products were tested 24 hours later. 3.5 mm to 7.0 mm, and under the fixed condition, the deviation was from 1.1 mm to 1.5 mm. Unlike the CAE analysis, the deviation of the actual injection pressure and the cooling temperature, the fiber orientation of the material, In order to solve this problem, it is necessary to compare the injection conditions with the database, I knew I had to catch the standard.

• Tunnel and Underground Space
• /
• v.23 no.3
• /
• pp.192-202
• /
• 2013

The domestic demand of natural gas has increased continuously due to the sudden rise of oil price and regulations on greenhouse gas to global warming. In order to improve the supply security of natural gas market in Korea, the agreement on supply of pipeline natural gas (PNG) in Russia was signed between Gazprom and Korea Gas Corporation in 2008. If the supply plan of Russian natural gas is realized, underground storage facilities would be required in order to balance supply and demand of natural gas because the gas demand is concentrated in the winter. This study investigated the safety of the storage facility in quantitative way considering several design parameters such as gas pressure, depth of the storage cavern, rock condition and in-situ horizontal stress ratio. Two dimensional stress analyses were conducted using axi- symmetry condition to examine the behavior of cavern depending upon suggested design parameters. Results showed that the factor of safety, defined as the ratio of 'shear strength'/'shear stress', was largely affected by the depth, rock class and gas pressure but was insensitive to the coefficient of lateral pressure(Ko).

• International Journal of Quality Innovation
• /
• v.6 no.3
• /
• pp.153-172
• /
• 2005

This study develops an exploratory model to evaluate the relationship between origins of corporate competencies and business performance, which targets small and medium-sized enterprises (SMEs) in Taiwan, analyzes 36 competence items in four functional dimensions: marketing, product design and development, manufacturing, and human resources management. The results from 760 valid samples from managers of Taiwan's SMEs reveal that in marketing competence and manufacturing competence were ranked high by Taiwan's SMEs managers. Elements contributed to manufacturing competence regarding reducing the number of suppliers has not been emphasized by Taiwan's SMEs managers. At the very top of the prevailing management competitive priority list are: (1) product or service quality, (2) timely delivery, (3) quality control improvement during the process, (4) increasing reliability of transportation, (5) introduction of new concepts and continuous improvement, and (6) improving after-sale services. The four competence dimensions are found highly correlated to business performance, which reflects the policy adjustments that Taiwan's small and medium-sized enterprises have made in the changing business environment to respond to the global market.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.5
• /
• pp.833-840
• /
• 2022

The precision of automation equipment and motors in factories is required, and global motor market has increased significantly. However, domestic motor technology lags behind foreign technology. In this thesis, the precision stability and efficiency were compared with a linear algorithm by applying a non-linear algorithm to a PLC servo motor and an Arduino step motor in order to improve the technology of the motor. The nonlinear algorithm was able to shorten the same driving reference time because the maximum speed of the motor was faster than the linear algorithm, and it was confirmed that the precision was improved due to the low curvature.

• Journal of Bio-Environment Control
• /
• v.25 no.1
• /
• pp.1-8
• /
• 2016

This study was conducted to find the suitability site for the construction of Saemangeum horticulture complex taking into account cost-effective environmental management by analyzing and comparing meteorological conditions. By overlapping the thematic maps, we extracted the regions that scored 50-59 points as suitable sites for the development project. Of these pre-selected sites, we selected the final candidate region for the protected horticulture by overlapping the sites selected for agricultural and living environment construction. The results of this study will contribute to generating added values by minimizing the environmental management costs for horticulture and landscaping. The operation of a large-scale protected horticulture and landscaping in the Saemangeum Complex will enhance the agricultural competitiveness of our country in the global market.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.4
• /
• pp.173-181
• /
• 2008

Last decade, Korea's export scale has resulted in remarkably increasing tendency, and the Korean construction firms(KCFs)' activities on the global markets also have been revitalized. Therefore, this paper analyze a correlation between changes in the oversee market conditions and firms' competitiveness focused on plant business. The aim of this paper is to analyze the internal competency change of the KCFs on the global markets in the past 5 years and to find gap of internal competencies between KCFs and outstanding foreign firms. From a survey analysis this paper found that the external impacts on the global markets(changes of exchange rates, raw materials prices, supply-demand conditions, etc.) have highly influenced the sales amount of the KCFs. But the impacts to change the operating profit have been analyzed as not important. So it is necessary to reinforce the KCF's internal competencies rater than expecting an improvement of the external conditions. Also, the KCFs should strengthen the design engineering as a core competency.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.5
• /
• pp.268-274
• /
• 2010

Because both R-134a and R-600a are used as a refrigerant of a household refrigerator in the global market, the home-appliance industry needs an optimized cycle for both refrigerants. The objective of this study is to provide the design guideline on the optimization of a refrigeration system using both refrigerants. For both refrigerants, the performance characteristics of the refrigeration system were tested by varying refrigerant charge amount, capillary tube length, suction diameter and SLHX length. The tested refrigeration system was optimized at the refrigerant charge of 60 g and the capillary tube length of 3600 mm with R-134a, and the refrigerant charge of 34 g and the capillary tube length of 3900 mm with R-600a. The COP increased from 1.63 to 1.68 for R-134a and increased from 1.37 to 1.48 for R-600a, respectively, by applying the suction diameter expansion. In addition, the COP of the R-134a and R-600a system decreased by 2.3~2.4% as the SLHX length decreased by 300 mm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.418-423
• /
• 2018

Recently, research and development of high-value leisure vessels has been carried out in Korea to revitalize the marine leisure industry and tap into the global maritime leisure market. FRP composite materials, which have excellent physical properties and are available for the manufacture of light hulls, are used widely. One of the most important design technologies is to secure structural safety of leisure vessels made from FRP composite materials. In this study, the structural strength was assessed for the design of an 8-meter high-speed planing leisure boat made from FRP composite materials. The design loads to verify the structural safety were calculated according to the rules for the classification of high speed light craft (KR, 2015), and structural analysis was conducted using a finite element model composed of an isotropic shell element, which has equivalent bending rigidity with the FRP sandwich panel. The analysis results were compared with the results of the strength test for fabricated specimens, and all internal structural components are sufficiently satisfied with the structural strength.

• Journal of Energy Engineering
• /
• v.21 no.3
• /
• pp.292-300
• /
• 2012

KHNP CRI has been developing APR+ nuclear power plant since 2007, which is GEN III+ model with 4,361 MWth capacity. To develop safer and more economical nuclear power plant than APR1400, we studied domestic and foreign nuclear power plants under construction. We also reviewed nuclear power plants which are appropriate for domestic construction in Korea and also for export. Economic assessments were made twice during the second phase of standard detailed design of the plant. The result of the second phase of economic analysis for APR+ standard detailed design showed that APR+ N-th plant was 24.6% more economical than coal-fired 1,000MW power plant, and was evaluated to be competitive enough in global market for construction of the nuclear power plant.