• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.6
• /
• pp.687-695
• /
• 2002

Media-specific FEC techniques, suggested to confront with VoIP speech packet loss, improve speech quality at the expense of generating additional one-frame delay. In this paper, we suggest new media-specific FEC, i.e, LSF FEC technique which is able to improve speech quality with much shortened additional delay. In the proposed technique, the LSF parameters of the future frame are utilized to recover a lost packet. To evaluate performance of the proposed technique, we use ITU-T G.723.1 and G.729 Codec and apply Gilbert packet loss model and estimate MOS per every packet loss rate using PESQ speech quality estimation algorithm. The proposed technique has effect of shortening delay over from 6.5ms to 27ms compared with existing media-specific FEC techniques. Simulation results for comparison of reconstructed speech quality show this novel technique improves the MOS over 0.1 in practical lossy environment of 5 % packet loss rate.

• Journal of Digital Convergence
• /
• v.19 no.12
• /
• pp.523-530
• /
• 2021

The study is purposed to investigate the current status of assistive technology devices(ATDs) and to explore ways to improve the ATDs support system for work. As a method, domestic and foreign systems were investigated to derive implications can be applied in Korea based on the analysis framework that compromised Gilbert and Terrell's policy analysis model and research purpose. Next, a survey was conducted on 202 disabled supported ATDs for Work. They were looking for a job or working. We would like to suggest a plan as follows. First, it is necessary to improve the support process centered on consumers. Second, the expansion of items and supplementation of the quality management system should be considered. Third, it is urgent to expand the application qualifications. Finally, the foundation for improvement should be continuously laid. We expected the direction of improvement of the support system will be established.

• Geophysics and Geophysical Exploration
• /
• v.2 no.2
• /
• pp.112-121
• /
• 1999

This article reviews the development of geophysical inverse theory. In a series of articles published in 1967, 1968, and 1979, G. Backus and F. Gilbert a trade-off between model resolution and estimation errors in geophysical inverse problems, and gave a criterion to compromise the reciprocal relation. Although the criterion was not clear in the physical point of view, it had been extensively used in the interpretation of geophysical date in the 1970s. This was the starting point of the fruitful development of inverse theory in geophysics. A reasonable criterion to compromise the reciprocal relation was derived to solve linear problems by D. D. jackson in 1979, introducing the concept of a priori information about unknown model parameters. This Jackson's approach was extended to solve nonlinear problems on the basis o probabilistic approach to the inverse problems formulated by A. Tarantola and B. Vallete in 1982. At the end of 1980s ABIC (Akaike Bayesian Information Criterion) was introduced for selecting a more reasonable model in geophysics. Now the date inversion is regarded as the process of extracting new information from observed data, combining in with a priori information about model parameters, and constructing a more clear image of model.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.101-110
• /
• 2002

This article summarises the traditional method of soil-structure interaction based on the modulus of subgrade reaction and shows its weakness. In order to avoid these weakness, a new soil-structure interaction model is proposed. This model considers the soil as a set of connected springs which enables interaction between springs. Its use is as simple as the traditional model but allows to define the soil properties independently from the structural properties and the loading conditions. Thus, the definition of the modulus of subgrade reaction is unnecessary as each component is defined by its own modulii (Young's modulus and shear modulus). The non-linear soil behaviour for the shear stress versus distortion is also incorporated in the model. This feature allows to pinpoint the arching effect in the ground and shows how the stresses concentrate on stiff materials. Based on these principles, three dimensional program has been developed in order to solve the difficult problem of soil improvement by inclusions (stiff or soft). Also the possibility to take into account a flexible mat and/or a subgrade layer has been implemented. Equations used in the model are developed and a parametric study of the necessary data used in the program is presented. In particular, the Westergaard modulus notion and the arching effect are analysed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5A
• /
• pp.355-362
• /
• 2009

In real-time communication services, delay constraints are among the most important QoS (Quality of Service) factors. In particular, it is difficult to guarantee the delay requirement over wireless channels, since they exhibit dynamic time-varying behavior and even severe burst-errors during periods of deep fading. Channel throughput may be increased, but at the cost of the additional delays when ARQ (Automatic Repeat Request) schemes are used. For real-time communication services, it is very essential to predict data deliverability. This paper derives the delay distribution and the successful delivery probability within a given delay budget using a priori channel model and a posteriori information from the perspective of queueing theory. The Gilbert-Elliot burst-noise channel is employed as an a Priori channel model, where a two-state Markov-modulated Bernoulli process $(MMBP_2)$ is used. for a posteriori information, the channel parameters, the queue-length and the initial channel state are assumed to be given. The numerical derivation is verified and analyzed via Monte Carlo simulations. This numerical derivation is then applied to a rate control scheme for real-time video transmission, where an optimal encoding rate is determined based on the future channel capacity and the distortion of the reconstructed pictures.

• Journal of Communications and Networks
• /
• v.9 no.3
• /
• pp.265-273
• /
• 2007

This paper expands an analytical performance model of 802.11 to accurately estimate throughput and energy demand of 802.11-based wireless sensor network (WSN) when sensor nodes employ Reed-Solomon (RS) codes, one of block forward error correction (FEC) techniques. This model evaluates these two metrics as a function of the channel bit error rate (BER) and the RS symbol size. Since the basic recovery unit of RS codes is a symbol not a bit, the symbol size affects the WSN performance even if each packet carries the same amount of FEC check bits. The larger size is more effective to recover long-lasting error bursts although it increases the computational complexity of encoding and decoding RS codes. For applying the extended model to WSNs, this paper collects traffic traces from a WSN consisting of two TIP50CM sensor nodes and measures its energy consumption for processing RS codes. Based on traces, it approximates WSN channels with Gilbert models. The computational analyses confirm that the adoption of RS codes in 802.11 significantly improves its throughput and energy efficiency of WSNs with a high BER. They also predict that the choice of an appropriate RS symbol size causes a lot of difference in throughput and power waste over short-term durations while the symbol size rarely affects the long-term average of these metrics.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.185-186
• /
• 2015

The Standard penetration test determines the type of soil according to soil bearing capacity, and this classifies the subsoil into many layers. Construction project managers are willing to know the depth of the present types of subsoil on site in order to make plans on earthwork stage during excavation. However the standard penetration test may not provide accurate information on subsoil type due to incorrect spacing. To solve this problem, this study propose a conceptual algorithm for determining the spacing of standard penetration test spots to essentially tests relevant locations on which to be applied the standard penetration test. This provides the acquirement of the accurate layered model volume of earthwork revised into geological columnar section. This algorithm will determine the appropriate standard penetration test spots spacing on a given size of site to optimize the accuracy of the earthwork volume, time and cost.

• Proceedings of the Korean Society for Information Management Conference
• /
• 2010.08a
• /
• pp.89-96
• /
• 2010

본 연구는 수행공학 모형을 적용하여 공공도서관의 서비스의 주요 문제점과 원인을 탐색하고 적절한 해결방안을 제안하였다. 이를 위해 A공공도서관 서비스를 대상으로 ISPI(International Society for Performance Improvement)수행공학 모형을 적용하여 이 모형절차에 따라 문제점분석, 원인분석, 해결책 선정을 순서에 따라 시행하였다. 문제점에 대한 원인은 Gilbert의 BEM 모형의 틀을 사용하여 환경적인 요소와 개인적인 요소로 나누어 분석하였다. 이렇게 발견된 원인들 중 선택된 원인에 대하여 해결책을 제안하였다. 본 연구는 수행공학 모형의 도서관 서비스 적용을 통해 향후 도서관 관련의 다양한 영역에서의 문제점 해결책을 강구하는데 아이디어를 제공하고자 한다.

• Journal of information and communication convergence engineering
• /
• v.7 no.4
• /
• pp.431-436
• /
• 2009

Gains promised by the introduction of e-commerce back-office systems are not easily realized due to poor technology acceptance, especially in developing countries. This study aims to analyze factors which affect information technology acceptance in developing countries. A research model based on TAM is proposed, and it is empirically tested for the hypotheses of factors which affect the acceptance behavior. The result shows that antecedents such as user training influence the technology acceptance in different ways. This study may help accelerate the adoption of back-office systems in developing countries.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.669-675
• /
• 2003

This paper examines structural breaks and asymmetries of prices of four domestic petroleum products, i.e., gasoline, kerosene, diesel, and bunker-C, following the changes in the pricing policies pertaining to petroleum products in Korea from the government-controlled pricing system to the market pricing system. We use the monthly wholesale market price data for the sample period between July 1988 and December 2001. Using the four methods: the Chow test, the CUSUM/CUSUMQ tests, the Bayesian approach and the Dufour test, the structural behaviors of the petroleum product prices are examined. We found that structural change occurred in all petroleum products, with the exception of Kerosene, at the point of pricing policy change from government-controlled to the spot-price related pricing system. We, also conducted asymmetric analysis using the Borenstein, Cameron, and Gilbert (1997)'s model and found evidences of price asymmetry for all four product types, but in different pattern for each product.