• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.12
• /
• pp.1721-1729
• /
• 2001

The performance of gas turbines is decreased as their operating hours increase. Fouling in the axial compressor is one of main reasons for the performance degradation of gas turbine. Airborne particles entering with air at the inlet into compressor adhere to the blade surface and result in the change of the blade shape, which is closely and sensitively related to the compressor performance. It is difficult to exactly analyze the mechanism of the compressor fouling because the growing process of the fouling is very slow and the dimension of the fouled depth on the blade surface is very small compared with blade dimensions. In this study, an improved analytic method to predict the motion of particles in compressor cascades and their deposition onto blade is proposed. Simulations using proposed method and their comparison with field data demonstrate the feasibility of the model. It if found that some important parameters such as chord length, solidity and number of stages, which represent the characteristics of compressor geometry, are closely related to the fouling phenomena. And, the particle sloe and patterns of their distributions are also Important factors to predict the fouling phenomena in the axial compressor of the gas turbine.

• Journal of the Korean Society of Safety
• /
• v.21 no.2 s.74
• /
• pp.29-34
• /
• 2006

It is revealed that these are correlated with the height of chamber deciding the turbulence extent. In the first experiment, It was examined about the effects of different multiple obstacles such as circular, triangular and square things with the rig that the dimension of original experimental rig was $700{\times}700{\times}200mm{\wedge}3$. Then the heights of chamber were increased from 200 to 1000mm. The dimensions of each obstacle were $70{\times}700{\times}{\wedge}2$ and rectangular vent area were $210{\times}700{\times}{\wedge}2$. In the second one, we performed to see the effects of locations of different multiple obstacles in 200, 500 and 800mm height from the bottom. The results are : The multiple triangular obstacles caused the highest overpressure while the lowest one was the multiple circle bars. Then, the triangular bars caused the highest flame acceleration while the circular obstacles was lowest too. The results showed that the critical height was 800mm due to the formation of turbulence. And the lesser $Av/V^{2/3}$ were small, the more pressure and pressure acceleration rate were increased.

• Journal of the Korean Solar Energy Society
• /
• v.21 no.3
• /
• pp.1-8
• /
• 2001

The chemical heat storage as the one way of utilization for high temperature solar energy was considered. The stram reforming reaction of methane was chosen for endothermic reaction. The reactor was made of stainless steel and the dimension was 6.25 mm I.D. and 30 cm long coiled tube because of the geometry requirement of solar receiver. The methane conversion was increased linearly with reaction temperature and nickel content of catalyst. The methane conversion was 60% at $600^{\circ}C$ and 90% at $900^{\circ}C$. The feasibility of steam reforming of methane as the conversion of solar energy to chemical heat storage was confirmed.

• Journal of the Korean Geographical Society
• /
• v.33 no.3
• /
• pp.355-364
• /
• 1998

Flume experiments are conducted to describe the channel morphology at a tributary junction and to examine the influence of channel arrangements and hydrologic conditions on the channel morphology. When flow momenta of two tributaries are equal, a receiving stream tends to align with an axis bisecting junction angle. It causes lateral migration of a receiving stream according to an initial channel arrangement. As a result, the post-fonfluent channel morphology varies with plan geometry of a confluence such as symmetry, transition and asymmetry. Bed scour is the most notable morphology within a junction site. Its shape is characterized by steep walls which are primarily influenced by junction angle. Key control of scour dimension is also junction angle. Although the principle of accordant junction has been undoubtedly accepted, discordance is commonly developed at model and natural stream confluences. Unit discharge ratio of confluent streams is the most crucial factor because both discharge and sediment concentration ratios have an effect on discordance at a junction.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.2
• /
• pp.270-287
• /
• 2015

According to the increase of the operating cost and material cost of a ship due to the change of international oil price, a demand for the lightening of the ship weight is being made from various parties such as shipping companies, ship owners, and shipyards. To satisfy such demand, many studies for a light ship are being made. As one of them, an optimal design method of an existing hull structure, that is, a method for lightening the ship weight based on the optimization technique was proposed in this study. For this, we selected a hatch cover of a bulk carrier as an optimization target and formulated an optimization problem in order to determine optimal principal dimensions of the hatch cover for lightening the bulk carrier. Some dimensions representing the shape of the hatch cover were selected as design variables and some design considerations related to the maximum stress, maximum deflection, and geometry of the hatch cover were selected as constraints. In addition, the minimization of the weight of the hatch cover was selected as an objective function. To solve this optimization problem, we developed an optimization program based on the Sequential Quadratic Programming (SQP) using C++ programming language. To evaluate the applicability of the developed program, it was applied to a problem for finding optimal principal dimensions of the hatch cover of a deadweight 180,000 ton bulk carrier. The result shows that the developed program can decrease the hatch cover's weight by about 8.5%. Thus, this study will be able to contribute to make energy saving and environment-friendly ship in shipyard.

• Journal of Integrative Natural Science
• /
• v.7 no.2
• /
• pp.92-102
• /
• 2014

The crystal structure of the title compounds with both coumarin and sulfonamide moieties were examined. These two groups have very special for their pharmaceutical and medicinal properties have been determined from single crystal X-ray diffraction data. In the title compound crystallizes in the monoclinic space group C2/c with unit cell dimension a = 28.633(3) ${\AA}$, b= 9.3215(7) ${\AA}$ and c= 24.590(2) ${\AA}$ [alpha & gamma=$90^{\circ}$ beta= $115.976(3)^{\circ}$]. In the structure The S1 atom shows a distorted tetrahedral geometry, with O1-S1-O2 [119.74 $(2)^{\circ}$] and N1-S1-C5 [$105.57(1)^{\circ}$] angles deviating from ideal tetrahedral values are attributed to the Thrope-Ingold effect. The sum of bond angles around N1 ($316.2(1)^{\circ}$) indicates that N1 is in sp2 hybridization. The Pyridine ring adopts boat conformation and pyran rings adopt a sofa conformation. The carboxylate group of atoms were disordered over two positions with site occupancy factors 0.598 (9):0.402 (9). Crystal structure and packing is stabilized by $C-H{\ldots}O$ intra and inter molecular hydrogen bond interactions.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.9
• /
• pp.701-709
• /
• 2011

In semiconductor wafer fabrication, etching is one of the most critical processes, by which a material layer is selectively removed. Because of difficulty to correct a mistake caused by over etching, it is critical that etch should be performed correctly. This paper proposes a new approach for etch endpoint detection of small open area wafers. The traditional endpoint detection technique uses a few manually selected wavelengths, which are adequate for large open areas. As the integrated circuit devices continue to shrink in geometry and increase in device density, detecting the endpoint for small open areas presents a serious challenge to process engineers. In this work, a high-resolution optical emission spectroscopy (OES) sensor is used to provide the necessary sensitivity for detecting subtle endpoint signal. Partial Least Squares (PLS) method is used to analyze the OES data which reduces dimension of the data and increases gap between classes. Support Vector Machine (SVM) is employed to detect endpoint using the data after PLS. SVM classifies normal etching state and after endpoint state. Two data sets from OES are used in training PLS and SVM. The other data sets are used to test the performance of the model. The results show that the trained PLS and SVM hybrid algorithm model detects endpoint accurately.

• Journal of Elementary Mathematics Education in Korea
• /
• v.21 no.1
• /
• pp.73-92
• /
• 2017

A table as an effective arrangement tool of a set of data has not been focused on as a single research subject despite of the fact that the table has been clearly one of learning and teaching elements of national math curriculum for a long time. I hope this article gets to be a starting point for future studies of tables. For this, the Finland elementary mathematics textbooks which use tables so often for many various purpose are chosen and analysed. As a result, it confirms that tables can be practical tools for developing different mathematical ideas in mathematics textbooks. Its applicable area is not limited on statistics but numbers and operations, geometry, measurement, ratio and rate. In addition, some ideas of the outlook, the size and dimension of tables, and the context of datum and etc are induced from the Finland elementary mathematics textbooks.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.2
• /
• pp.364-370
• /
• 2011

This paper propose a novel method for tracking moving object based on covariance matrix and Riemannian Manifolds. With image backgrounds continuously changed, we use the covariance matrices to extract features for tracking nonrigid object undergoing transformation and deformation. The covariance matrix can make fusion of different types of features and has its small dimension, therefore we enable to handle the spatial and statistical properties as well as the component correlation. The proposed method can estimate the position of the moving object by employing the covariance matrix of object region as a feature vector and comparing the candidate regions. Rimannian Geometry is efficiently adapted to object deformation and change of shape and improve the accuracy by using geodesic distance to predict the estimated position with the minimum distance. The experimental results have shown that the proposed method correctly tracked the moving object.

• Steel and Composite Structures
• /
• v.36 no.1
• /
• pp.47-62
• /
• 2020

In this study, free vibration behavior of trapezoidal sandwich plates with porous core and two graphene platelets (GPLs) reinforced nanocomposite outer layers are presented. The distribution of pores and GPLs are supposed to be functionally graded (FG) along the thickness of core and nanocomposite layers, respectively. The effective Young's modulus of the GPL-reinforced (GPLR) nanocomposite layers is determined using the modified Halpin-Tsai micromechanics model, while the Poisson's ratio and density are computed by the rule of mixtures. The FSDT plate theory is utilized to establish governing partial differential equations and boundary conditions (B.C.s) for trapezoidal plate. The governing equations together with related B.C.s are discretized using a mapping- generalized differential quadrature (GDQ) method in the spatial domain. Then natural frequencies of the trapezoidal sandwich plates are obtained by GDQ method. Validity of current study is evaluated by comparing its numerical results with those available in the literature. A special attention is drawn to the role of GPLs weight fraction, GPLs patterns of two faces through the thickness, porosity coefficient and distribution of porosity on natural frequencies characteristics. New results show the importance of this permeates on vibrational characteristics of porous/GPLR nanocomposite plates. Finally, the influences of B.C.s and dimension as well as the plate geometry such as face to core thickness ratio on the vibration behaviors of the trapezoidal plates are discussed.