• Computational Structural Engineering
• /
• v.3 no.3
• /
• pp.133-140
• /
• 1990

Analysis of cable structures is complex because their force - displacement relationships are highly nonlinear and also because large deformations introduce geometric nonlinearity. Therefore, we must take account their geometric nonlinearity in the analysis and find the equilibrated shape of cable structures. In this paper, to slove these problems, numerical procedures involving geometrical nonlinearity are introduced. They are applicable to general cable net, flexible transmission lines and suspended cable roof. These procedures are divided into two parts; one is to obtain the equilibrated shapes and stresses of the cable structures with uniform load by flexibility iteration method, the other is to analyse the equilibrated structures subjected to nodal external forces by nonlinear finite element method.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.3
• /
• pp.199-205
• /
• 2016

A thin sheet of metal with corrugated structures has been utilized in various devices: heat exchangers, separators in fuel cells, and many others. However, it is not easy to fabricate thin corrugated structures using a single-step stamping process due to their geometrical complexity. To solve this problem, firstly, a plate type heat exchanger was redesigned to attain the optimal value of aspect ratio and the optimal shape of corrugated structures for the actual loading conditions. A forming analysis of the corrugated plate was then carried out to determine the process parameters. From this work, the optimal value of aspect ratio was found to be 4.6. In addition, the process parameters of heat exchanger forming were optimized using the optimal value of aspect ratio, and the analytical results were evaluated through experiments. The results obtained indicated good agreements between them.

• Journal of Welding and Joining
• /
• v.21 no.2
• /
• pp.102-110
• /
• 2003

A visual sensor consisted of polygonal mirror, laser, and CCD camera was proposed to measure the distance to the weld joint for recognizing the joint shape. To scan the laser beam of the sensor onto an object, 8-facet polygonal mirror was used as the rotating mirror. By locating the laser and the camera at axi-symmetrical positions around the mirror, the synchronized-scan condition could be satisfied even when the mirror was set to rotate through one direction continuously, which could remove the inertia effect of the conventional oscillating-mirror methods. The mathematical modelling of the proposed sensor with the optical triangulation method made it possible to derive the relation between the position of an image on the camera and the one of a laser light on the object. Through the geometrical simulation of the proposed sensor with the principal of reflection and virtual image, the optical path of a laser light could be predicted. The position and direction of the CCD camera were determined based on the Scheimpflug's condition to fit the focus of any image reflected from an object within the field of view. The results of modelling and simulation revealed that the proposed visual sensor could be used to recognize the weld joint and its vicinity located within the range of the field of view and the resolution. (Received February 19, 2003)

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.595-599
• /
• 2002

Edge welding of thin sheets is very difficult because of the fit-up problem and small weld area In laser welding, joint fit-up and penetration are critical for sound weld quality, which can be monitored by appropriate methods. Among the various monitoring systems, visual monitoring method is attractive because various kinds of weld pool information can be extracted directly. In this study, a vision sensor was adopted for the weld pool monitoring in pulsed Nd:YAG laser edge welding to monitor whether the penetration is enough and the joint fit-up is within the requirement. Pulsed Nd:YAG laser provides a series of periodic laser pulses, while the shape and brightness of the weld pool change temporally even in one pulse duration. The shutter-triggered and non-interlaced CCD camera was used to acquire a temporally changed weld pool image at the moment representing the weld status well. The information for quality monitoring can be extracted from the monitored weld pool image by an image processing algorithm. Weld pool image contains not only the information about the joint fit-up, but the penetration. The information about the joint fit-up can be extracted from the weld pool shape, and that about a penetration from the brightness. Weld pool parameters that represent the characteristics of the weld pool were selected based on the geometrical appearance and brightness profile. In order to achieve accurate prediction of the weld penetration, which is nonlinear model, neural network with the selected weld pool parameters was applied.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.679-682
• /
• 2002

Energy dissipations in a general PHE flow are the compounded effects of the piled corrugate geometries and its wall pressure and temperature distributions. In addition, although the exchangers are substantial pieces of engineering equipment, they are composed of a very large number of nominally identical and small geometrical elements. In the present numerical study, the three-dimensionally complicated energy dissipation fields and those wall-shape-induced flow destabilization are investigated in the cross-corrugated passages, which result in high energy transports with comparatively low pressure drop. We revealed the critical conditions as $Re=157.3 for the wall-shape-induced flow destabilization in a general PHE element by initial value method, or shooting method, and compare its value to that of analytical solution of plane Poiseille flow, two-dimensional grooved flow and so on. We also observed the detailed variation of flow field and energy transportation with changes in time and flow variables such as Reynolds number. Lastly, we considered the flow natural frequency, or Strouhal number, with variation of hydrodynamic conditions for the best use of active control, such as forced mass flow rate pulsative flow, to enhance energy transportation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.11
• /
• pp.3387-3397
• /
• 1996

The Hub is an auto mobile component used as aircon clutch. The important aspects in cold forging of the Hub with complex geometry are the design of an initial shape of the workpiece, the possibility of the forming by one-stage operation and the determination of number of performs, etc. Based on the systematic procedure of process sequence design, in this paper, the forming operation of cold forged part of the Hub is designed by the rigid-plastic finite element method. The two design criterion of geometrical filling without defect and an even distribution of effective strain in final product are investigated in controlling the initial shape of the workpiece and preform configuration. It is noted that one preforming operation is required in order to obtain final product of the Hub.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.4
• /
• pp.309-318
• /
• 2001

In this paper, we describe methods that analyze a human gesture. A human interface(HI) system for analyzing gesture extracts the head and hand regions after taking image sequence of and operators continuous behavior using CCD cameras. As gestures are accomplished with operators head and hands motion, we extract the head and hand regions to analyze gestures and calculate geometrical information of extracted skin regions. The analysis of head motion is possible by obtaining the face direction. We assume that head is ellipsoid with 3D coordinates to locate the face features likes eyes, nose and mouth on its surface. If was know the center of feature points, the angle of the center in the ellipsoid is the direction of the face. The hand region obtained from preprocessing is able to include hands as well as arms. For extracting only the hand region from preprocessing, we should find the wrist line to divide the hand and arm regions. After distinguishing the hand region by the wrist line, we model the hand region as an ellipse for the analysis of hand data. Also, the finger part is represented as a long and narrow shape. We extract hand information such as size, position, and shape.

• Journal of computational fluids engineering
• /
• v.21 no.3
• /
• pp.39-47
• /
• 2016

We conducted a multi-stage optimization to secure the desired performance of a centrifugal fan for home appliance in an early stage of product development. In optimization, the static pressure at the outlet of the fan is chosen as an objective function that is to be maximized, providing the required flow rate at the operating point of the fan. The optimization procedure begins with parameters for an initial baseline fan design. The baseline design is optimized by using a commercial optimization package. Accordingly, the corresponding blade models with a set of geometrical parameters are generated. Flow through a fan is simulated by solving the Reynolds-averaged Navier-Stokes equations. A multi-stage optimization scheme is employed to determine the family of optimum values for the parameters, leading to the pressure increase at the outlet of the fan. To validate the numerically obtained optimal design parameters, we fabricated the three types of fans using rapid prototyping and assessed the performance using a fan tester. Experimental results show that the design parameters at each stage satisfy the goal of optimization. The multi-stage optimization process turned out to be a useful tool in the development of a centrifugal fan.

• Journal of Biosystems Engineering
• /
• v.30 no.3 s.110
• /
• pp.172-178
• /
• 2005

Grading and sorting an indeterminate form of agricultural products such as sweet potatoes and potatoes are a labor intensive job because its shape and size are various and complicate. It costs a great deal to sort sweet potato in an indeterminate forms. There is a great need for an automatic grader fur the potatoes. Machine vision is the promising solution for this purpose. The optical indices for qualifying weight and appearance quality such as shape, color, defects, etc. were obtained and an on-line sorting system was developed. The results are summarized as follows. Sorting system combined with an on-line inspection device was composed of 5 sections, human inspection, feeding, illumination chamber, image processing & control, and grading & discharging. The algorithms to compute geometrical parameters related to the external guality were developed and implemented for sorting the deformed sweet potatoes. Grading accuracy by image processing was $96.4\%$ and the processing capacity was 10,800 pieces per hour.

• Journal of Fashion Business
• /
• v.12 no.6
• /
• pp.93-106
• /
• 2008

The purpose of this study is to analyze design characteristics of Chanel bags by its type and shape, material, color, pattern, decorations in order to give information about foundation of the development of Korean fashion brand handbags and help suggest predict future handbag trends. The methods of this study are documentary research and demonstrative research. For the documentary research, mainly previous researches and fashion related data were used. For the demonstrative research, the total of 288 design photos of Chanel bag were selected from 2001 S/S season to 2008 F/W season fashion collections of firstview.com., style.com., and mode et mode. The results of this study are as follows; First, type and shape of bags are clutch(30%), flap(25%), shoulder(25%), others(10%), tote(5%), hobo(5%). Second, the material data shows that leather(46%), mixed(18%), fabric(17%), synthetics (10%), patent(3%), others(3%), and suede(2%). Third, the patterns are geometrical(27%), solid(25%), combination(24%), symbolic(11%), abstract(11%), nature(2%). Fourth, the colors are largely monochrome(73%) and multicolor(27%). In case of monochrome, achromatic color(50%) is more than chromatic color(23%). The chromatic color is consisted of YR(9%), Y(9%), R(5%), RP(4%), PB(2%), P(1%), GY(0.5%), BG(0.5%). The multicolor is consisted of similar coloration(12%), contrast coloration(10%), and accent coloration(5%). Fifth, the decoration data shows that metallic(53%), plain(23%), combination(22%), and handcrafted(1%).