• Steel and Composite Structures
• /
• v.52 no.3
• /
• pp.327-341
• /
• 2024

This paper is the first in a series of articles dealing with the study and analysis of imperfections in thin-walled, cold-formed steel sections with modified cross-sectional shapes. A study was conducted, using 3D scanning techniques, to determine the most vulnerable geometric imperfections in the profiles. Based on a review of the literature, it has been determined that few researchers are studying thin-walled sections with modified cross-sectional shapes. Each additional bend in the section potentially generates geometric imperfections. Geometric imperfections significantly affect the resistance to loss of stability, which is crucial when analyzing thin-walled structures. In addition, the most critical locations along the length where these imperfections occur were determined. Based on the study, it was found that geometric imperfections cause a reduction in critical load. It should be noted that the tests performed are preliminary studies, based on which a program of further research will be developed. In addition, the article presents the current state of knowledge in the authors' field of interest. The future objective is to ascertain if these imperfections could potentially contribute positively to structural integrity. This enhanced understanding may pave the way for novel methodologies in structural engineering, wherein imperfections are viewed not solely as flaws but also as elements that could enhance the end product.

• East Asian mathematical journal
• /
• v.36 no.4
• /
• pp.493-513
• /
• 2020

The reason for this study is that the learning content of geometric construction in school mathematics is very insufficient. Geometric construction not only enables in-depth understanding of shapes, but also improves deductive proof skills. In school mathematics education, geometric construction is a very important learning factor, and educational significance is very high in that it can develop reasoning skills essential to the future society. Nevertheless, the reduction of geometric construction learning content in Korean curriculum and mathematics textbooks is against the times. Therefore, the purpose of this study is to analyze the transition of geometric construction learning contents in middle school mathematics curriculum and mathematics textbooks. In order to achieve the purpose of this study, the following studies were conducted. First, we analyze the characteristics of geometric construction according to changes in curriculum and textbooks. Second, we develop a framework for analyzing geometric construction tasks. Third, we explore geometric construction tasks according to the developed framework. Through this, it is expected to provide significant implications for the geometric areas of the new middle school curriculum that will be developed in the future.

• Korean Journal of Computational Design and Engineering
• /
• v.9 no.4
• /
• pp.294-305
• /
• 2004

Highly detailed geometric models are rapidly becoming commonplace in computer graphics and other applications. These complex models, which is often represented as complex1 triangle meshes, mainly suffer from the vast memory requirement for real-time manipulation of arbitrary geometric shapes without loss of data. Various techniques have been devised to challenge these problems in views of geometric processing, not a representation scheme. This paper proposes the new mesh structure for the compact representation and the efficient handling of the highly complex models. To verify the compactness and the efficiency, the memory requirement of our representation is first investigated and compared with other existing representations. And then we analyze the time complexity of our data structure by the most critical operation, that is, the enumeration of the so-called one-ring neighborhood of a vertex. Finally, we evaluate some elementary modeling functions such as mesh smoothing, simplification, and subdivision, which is to demonstrate the effectiveness and robustness of our mesh structure in the context of the geometric modeling and processing.

• Korean Journal of Computational Design and Engineering
• /
• v.15 no.1
• /
• pp.33-42
• /
• 2010

In this study, new medial surface calculation methods using Voronoi diagrams are investigated for the point samples extracted on closed surface models. The medial surface is defined by the closure of all points having more than one closest point on the shape boundary. It is a one of essential geometric information in 3D and can be used in many areas such as 3D shape analysis, dimension reduction, freeform shape deformation, image processing, computer vision, FEM analysis, etc. In industrial parts, the idealized solid parts and shell shapes including sharp edges and vertices are frequently used. Other medial surface extraction methods using Voronoi diagram have inherent separation and branch problems, so that they are not appropriate to the sharp edged objects and have difficulties to be applied to industrial parts. In addition, the branched surfaces on sharp edges in shell shapes should be eliminated to obtain representative medial shapes. In order to avoid separation and branch problems, the new approach by analyzing the shapes and specially sampling on surfaces has been developed.

• Journal of the Korean Society of Costume
• /
• v.54 no.1
• /
• pp.11-21
• /
• 2004

This study examined the kinds, shape, technique, and arrangement of pattern for the Korean traditional women costume between 1995 and 2002. The sources used this study were collected from the magazine “HANBOK, ONGOJISHIN, BEAUTIFUL OUR DRESS” Results were as follows 1) In the kinds of pattern, the most pattern of use was the flower pattern, and the geometric pattern showed the trend of increase. these results mean the use of pattern lately is progressed by the new direction. 2) In the shape of pattern, the style shapes were decreased gradually and the geometric shapes were increased. these results show that the modern beauty is chased. 3) In the technique of pattern. the results viewed that the embroidery technique used in the meantime decreased and the JOGAKBO technique increased. 4) In the arrangement of pattern, the modern arrangement was most superior in the most of year. That is estimated the arrangement of pattern have been chased the modern beauty than the others of pattern.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.6
• /
• pp.1810-1818
• /
• 1996

A new finite elemetn approach is introduced for direct prediction of bland shapes and strain distributions from desired final shapes in sheet metal forming. The approach deals with the geometric compatibility of finite elements, plastic deformation theory, minimization of plastic work with constraints, and a proper initial guess. The algorithm developed is applied to cylindrical cup drawing, square cup drawing, and fron fender forming to confirm its validity by demonstratin reasonable accurate numerical results of each problems. Rapid calculation with this algorithm enables easy determination of various process variables for design of sheet metal forming process.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1998.04a
• /
• pp.441-448
• /
• 1998

In this study, an explicit transient analysis program considering material and geometric nolinearities has been developed and used to analyze the dynamic behaviors of circular, parabolic, sinusoidal and catenary arches according to the change of shapes and boundary conditions. To understand dynamic behaviors of arches, first of all, the results of free vibration analysis for four kinds of arches are discussed. The results of transient analysis under impact loads we discussed in respect of boundary condition, change of height, and arch-shape. The dynamic behaviors of arches by nonlinear transient analysis considering both material and geometric nolinearities are also discussed.

• Structural Engineering and Mechanics
• /
• v.33 no.6
• /
• pp.747-763
• /
• 2009

In this work, the linear vibration characteristics of $90^{\circ}$ pipe bends and their cylindrical and toroidal shell components are studied. The finite element method, based on shear-deformation shell elements, is used to carry out a vibration analysis of metallic multiple $90^{\circ}$ mitred pipe bends. Single, double, and triple mitred bends are considered, as well as a smooth bend. Sample natural frequencies and mode shapes are given. To validate the procedure, comparison of the natural frequencies is made with existing results for cylindrical and toroidal shells. The influence of the multiplicity of the bend, the boundary conditions, and the various geometric parameters on the natural frequency is described. The differential quadrature method, based on classical shell theory, is used to study the vibration of components of these bends. Regression formulas are derived for cylindrical shells (straight pipes) with one or two oblique edges, and for sectorial toroidal shells (curved pipes, pipe elbows). Two types of support are considered for each case. The results given provide information about the vibration characteristics of pipe bends over a wide range of the geometric parameters.

• Steel and Composite Structures
• /
• v.30 no.4
• /
• pp.305-313
• /
• 2019

Creating different cutout shapes in order to make doors and windows, reduce the structural weight or implement various mechanisms increases the likelihood of buckling in thin-walled structures. In this study, the effect of cutout shape and geometric imperfection (GI) is simultaneously investigated on the critical buckling load and knock-down factor (KDF) of composite cylindrical shells. The GI is modeled using single perturbation load approach (SPLA). First, in order to assess the finite element model, the critical buckling load of a composite shell without cutout obtained by SPLA is compared with the experimental results available in the literature. Then, the effect of different shapes of cutout such as circular, elliptic and square, and perturbation load imperfection (PLI) is investigated on the buckling behavior of cylindrical shells. Results show that the critical buckling load of a shell without cutout decreases by increasing the PLI, whereas increasing the PLI does not have a great impact on the critical buckling load in the presence of cutout imperfection. Increasing the cutout area reduces the effect of the PLI, which results in an increase in the KDF.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.48 no.3
• /
• pp.467-484
• /
• 2024

This study aimed to enhance the design of cropped t-shirts to improve fit satisfaction among women in their 20s by tailoring the t-shirts to diverse body types. Body types were categorized using Size Korea's 8th Human Body Measurement Data, and statistical analysis was conducted based on the Statistical Package for the Social Sciences (version 26.0). This study also reviewed the literature on t-shirts and fit, the application of pattern and design improvements for different body types, verifying fit and size for each body type, and applying virtual fit effects using geometric forms. Frequency analysis and non-parametric verification were conducted using the Friedman test. The results showed that t-shirts with a horizontal rectangular shape was an effective design and that t-shirts with an inverted triangular structure also had a positive effect. In contrast, square t-shirts exhibited minimal effectiveness. These findings are expected to contribute to the consideration of customized shapes according to body type in t-shirt design. Research on customized virtual cropped t-shirts reflecting various body types can expand fit satisfaction studies, particularly amid the increasing trend of online shopping.