• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.3
• /
• pp.277-288
• /
• 2021

Building information modeling (BIM) element to industry foundation classes (IFC) entity mappings need to be checked to ensure the semantic integrity of BIM models. Existing studies have demonstrated that machine learning algorithms trained on geometric features are able to classify BIM elements, thereby enabling the checking of these mappings. However, reliance on geometry is limited, especially for elements with similar geometric features. This study investigated the employment of relational data between elements, with the assumption that such additions provide higher classification performance. Neural structured learning, a novel approach for combining structured graph data as features to machine learning input, was used to realize the experiment. Results demonstrated that a significant improvement was attained when trained and tested on eight BIM element types with their relational semantics explicitly represented.

• Nuclear Engineering and Technology
• /
• v.54 no.10
• /
• pp.3795-3802
• /
• 2022

NaI(Tl) scintillation materials are considered to be one of many materials that are used exclusively for γ-ray detection and spectroscopy. The gamma-ray spectrometer is not an easy-to-use device, and the accuracy of the numerical values must be carefully checked based on the rules of the calibration technique. Therefore, accurate information about the detection system and its effectiveness is of greater importance. The purpose of this study is to estimate, using an analytical-numerical formula (ANF), the purely geometric solid angle, geometric efficiency, and total efficiency of a cylindrical NaI(Tl) γ-ray detector with a side-through hole. This type of detector is ideal for scanning fuel rods and pipelines, as well as for performing radio-immunoassays. The study included the calculation of the complex solid angle, in combination with the use of various points like gamma sources, located axially and non-axially inside the through detector side hole, which can be applied in a hypothetical method for calibrating the facility. An extended γ-ray energy range, the detector, source dimensions, "source-to-detector" geometry inside the side-through hole, path lengths of γ-quanta photons crossing the facility, besides the photon average path length inside the detector medium itself, were studied and considered. This study is very important for an expanded future article where the radioactive point source can be replaced by a volume source located inside the side-trough hole of the detector, or by a radioactive pipeline passing through the well. The results provide a good and useful approach to a new generation of detectors that can be used for low-level radiation that needs to be measured efficiently.

• Proceedings of the National Institute of Ecology of the Republic of Korea
• /
• v.3 no.1
• /
• pp.32-40
• /
• 2022

The trade-off between morphology and physical function may vary according to ecological traits. Taking a quantitative approach, we attempted to analyze the differences in the skeletal shape of the lower body and limbs in relation to the ecological traits of four anuran species (Dryophytes japonicus, Glandirana rugosa, Pelophylax nigromaculatus, and Lithobates catesbeianus) occurring in South Korea. Body size, locomotor mode, microhabitat, trophic positions, and predator defense mechanisms were selected for the ecological traits of the anurans. The pelvis, ilium, and urostyle, which are associated with locomotor performance, were selected for the skeletal shape of the lower body. The ratio of limbs, which is related to locomotor mode and microhabitat, was confirmed by analyzing the skeletons of the forelimbs (radio-ulnar and humerus) and hindlimbs (femur and tibiofibular). Both landmark-based geometric morphometrics and traditional methods were used for skeletal shape comparison. The skeletal shape of the lower body was completely different among the four species, whereas the ratio of the limbs was only different in D. japonicus. The skeletal shape of the lower body may be related to body mass and predator defense mechanisms, whereas the ratio of the limbs was related to the locomotor mode and microhabitat. Quantifying these morphological differences among various species can help elucidate the mechanisms of behavioral and morphological changes in response to ecological effects.

• Advances in materials Research
• /
• v.13 no.4
• /
• pp.299-319
• /
• 2024

Due to higher strength-to-weight ratio of composite laminates, they find uses in many weight-sensitive applications like aerospace, automobile and marine structures. From a reliability point of view, accurate prediction of failure of these structures is important. Due to the complexities in the manufacturing processes of composite laminates, there is a variation in the material properties and geometric parameters. Hence stochastic aspects are important while designing the composite laminates. Many existing works of composite laminate failure analysis are based on the deterministic approach but it is important to consider the randomness in the material properties, geometry and loading to predict accurate failure loads. In this paper the statistics of the ultimate failure load of the [0/θ]_s laminated composite plate (LCP) containing the edge crack and voids subjected to the tensile loading are presented in terms of the mean and coefficient of variance (COV). The objective is to better the efficacy of laminate failure by predicting the statistics of the ultimate failure load of LCP with random material, geometric and loading parameters. The stochastic analysis is done by using the extended finite element method (XFEM) combined with the second-order perturbation technique (SOPT). The ultimate failure load of the LCP is obtained by ply-by-ply failure analysis using the ply discount method combined with the Tsai-Wu failure criterion. The aim is to know the effect of the stacking sequence, crack length, crack angle, location of voids and number of voids on the mean and corresponding COV of the ultimate failure load of LCP is investigated. The results of the ultimate failure load obtained by the present method are in good agreement with the existing experimental and numerical results. It is observed that [0/θ]_s LCPs are very sensitive to the randomness in the crack length, applied load, transverse tensile strength of the laminate and modulus of elasticity of the material, so precise control of these parameters is important. The novelty of the present study is, the stochastic implementation in XFEM for the failure prediction of LCPs containing crack and voids.

• Journal of Elementary Mathematics Education in Korea
• /
• v.21 no.2
• /
• pp.309-341
• /
• 2017

This study aims to investigate an approach to teach percentages in elementary mathematics class by analyzing calculating strategies with percentage the students use to solve the percentage tasks and their percentages of correct answers, as well as types of errors with percentages the students make. For this research 182 sixth graders were examined. The instrument test consists of various task types in reference to the previous study; the percentages tasks are divided into algebraic-geometric, part whole-comparison-change and find part-find whole-find percentage tasks. According to the analysis of this study, percentages of correct answers of students with percentage tasks were lower than we expected, approximately 50%. Comparing the percentages of correct answers according to the task types, the part-whole tasks are higher than the comparison and change tasks, the geometric tasks are approximately equal to the algebraic tasks, and the find percentage tasks are higher than the find whole and find part tasks. As to the strategies that students employed, the percentage of using the formal strategy is not much higher than that of using the informal strategy, even after learning the formal strategy. As an insightful approach for teaching percentages, based on the study results, it is suggested to reinforce the meaning of percentage, include various types of the comparison and change tasks, emphasize the informal strategy explicitly using models prior to the formal strategy, and understand the relations among part, whole and percentage throughly in various percentage situations before calculating.

• Journal of Korean Society of Transportation
• /
• v.21 no.5
• /
• pp.73-81
• /
• 2003

The Government presented improvement plans such as "Traffic Accident Frequent Point" and "Hazardous Roads" to reduce traffic accidents on the increase after 1980s. In case of the hazardous roads, they are expressed by grades which are marked by geometric elements such as width, radius, grade. sight distance. and other environmental factors. As each business for improving roads goes by only focusing on improvement of geometric elements, excessive expense can be invested too much nowadays causing economical waste. Therefore, as improvement plans approached by economic access are needed, this paper shows the cost-effective improvement of the business to keep safety related to traffic accident and economical waste. The hazardous roads which authorized by Gwang-ju National Road Preservation Office of Construction and Transportation Ministry in 1995 for business for improvement of roads, were investigated before 1999. First of all, estimating traffic accident models are presented by using existed data statistically. The models help to maximize traffic accident decrease through control of the presented factor. Secondly, optimum construction cost of improvement is presented to prevent overcapitalization. However, this paper is limited because it was difficult to sort the data with various areas and to approach various ways.

• The Journal of the Korea Contents Association
• /
• v.11 no.8
• /
• pp.123-133
• /
• 2011

In this paper, we propose a new method for toon shading using 3D texture which renders 3d objects in a cartoon style. The conventional toon shading using 1D texture displays shading tone by computing the relative position and orientation between a light vector and surface normal. The 1D texture alone has limits to express the various tone change according to any viewing condition. Therefore Barla et. al. replaces a 1D texture with a 2D texture whose the second dimension corresponds to the view-dependent effects such as level-of-abstraction, depthof-field. The proposed scheme extends 2D texture to 3D texture by adding one dimension with the geometric information of 3D objects such as curvature, saliency, and coordinates. This approach supports two kinds of extensions for cartoon style diversification. First, we support "shape exaggeration effect" to emphasize silhouette or highlight according to the geometric information of 3D objects. Second, we further incorporate "cartoon specific effect", which is examples of screen tone and out focusing frequently appeared in cartoons. We demonstrate the effectiveness of our approach through examples that include a number of 3d objects rendered in various cartoon style.

• Journal of Elementary Mathematics Education in Korea
• /
• v.19 no.4
• /
• pp.457-484
• /
• 2015

This study aims to investigate an approach to teach proportional reasoning in elementary mathematics class by analyzing the proportional strategies the students use to solve the proportional reasoning tasks and their percentages of correct answers. For this research 174 sixth graders are examined. The instrument test consists of various questions types in reference to the previous study; the proportional reasoning tasks are divided into algebraic-geometric, quantitative-qualitative and missing value-comparisons tasks. Comparing the percentages of correct answers according to the task types, the algebraic tasks are higher than the geometric tasks, quantitative tasks are higher than the qualitative tasks, and missing value tasks are higher than the comparisons tasks. As to the strategies that students employed, the percentage of using the informal strategy such as factor strategy and unit rate strategy is relatively higher than that of using the formal strategy, even after learning the cross product strategy. As an insightful approach for teaching proportional reasoning, based on the study results, it is suggested to teach the informal strategy explicitly instead of the informal strategy, reinforce the qualitative reasoning while combining the qualitative with the quantitative reasoning, and balance the various task types in the mathematics classroom.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.6
• /
• pp.477-485
• /
• 2012

Geometric configurations such as hull shape, wall thickness, stiffener layout, and type of construction materials are the key factors influencing the structural performance of pressure hulls. Traditional theoretical approach provides quick and acceptable solutions for the design of pressure hulls within specific geometric configuration and material. In this paper, alternative approaches that can be used to obtain optimal geometric shape, wall thickness, construction material configuration and stiffener layout of a pressure hull are presented. CAE(Computer Aided Engineering) based design optimization tools are utilized in order to obtain the required structural responses and optimal design parameters. Optimal elliptical meridional profile is determined for a cylindrical pressure hull design using metamodel-based optimization technique implemented in a fully-integrated parametric modeler-CAE platform in ANSYS. While the optimal composite laminate layup and the design of ring stiffener for a thin-walled pressure hull are obtained using gradient-based optimization method in OptiStruct. It is noted that the proposed alternative approaches are potentially effective for pressure hull design.

• Journal of KIISE:Software and Applications
• /
• v.31 no.11
• /
• pp.1543-1550
• /
• 2004

Modeling from images is a cost-effective means of obtaining 3D geometric models. These models can be effectively constructed from classical Structure from Motion algorithm. However, it's too difficult to reconstruct whole scenes using SFM method since general sites contain a very complex shapes and brilliant colours. To overcome this difficulty, the current paper proposes a new reconstruction method based on a moving Planar mirror. We devise the mirror posture instead of scene itself as a cue for reconstructing the geometry That implies that the geometric cues are inserted into the scene by compulsion. With this method, we can obtain the geometric details regardless of the scene complexity. For this purpose, we first capture image sequences through the moving mirror containing the interested scene, and then calibrate the camera through the mirror's posture. Since the calibration results are still inaccurate due to the detection error, the camera pose is revised using frame-correspondence of the comer points that are easily obtained using the initial camera posture. Finally, 3D information is computed from a set of calibrated image sequences. We validate our approach with a set of experiments on some complex objects.