• 제목/요약/키워드: Generator Characteristics

검색결과 1,632건 처리시간 0.034초

고체연료를 사용하는 가스발생기 유량조절특성 연구 (Characteristics of Flow Rate Control for Solid Fuel Gas Generator)

  • 최호진;현형수;이경호;박익수;이재윤;윤현걸;임진식
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2011년도 제37회 추계학술대회논문집
    • /
    • pp.293-298
    • /
    • 2011
  • 덕티드로켓 추진기관에 사용되는 불완전연소 가스발생기 및 유량조절시스템을 설계/제작하고 연소시험을 수행하여 유량조절특성을 분석하였다. 추진시스템 설계요구조건을 바탕으로 가스발생기를 설계하고 불완전연소용 고체연료 조성을 개발하여 연소시험을 수행, 일반적인 고체추진기관 해석모델을 통한 예측결과와 상당한 차이의 실험결과로부터 불완전 연소가스를 위한 별도의 해석모델이 요구됨을 확인하였다. 유량조절 시험을 통해 밸브각도에 따른 가스발생기 압력변화 특성을 확인하였고, 출구면적에 따라 유일하게 결정되는 유출계수로부터 가스발생기 압력을 예측하는 방법을 도출하였다.

  • PDF

개방회로, 단락회로 특성시험 및 부하시험을 이용한 30 kVA 초전도 발전기의 특성해석 (A Study on 30 kVA Super-Conducting Generator Performance using Open Circuit, Short Circuit Characteristics, and Load Tests)

  • 하경덕;황돈하;박도영;김용주;권영길;류강식
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제49권2호
    • /
    • pp.85-92
    • /
    • 2000
  • 30 kVA rotating-field type Super-Conducting Generator is built and tested with intensive FE(Finite Element) analysis. The generator is driven by VVVF inverter-fed induction motor. Open Circuit Characteristic(OCC) and Short Circuit Characteristic(SCC) are presented in this paper. Also, the test result under the light load(up to 3.6 kW) are given. From the design stage, 2-D FE analysis coupled with the external circuit has been performed. The external circuit includes the end winding resistance and reactance as well as two dampers. When compared with the test data, the FE analysis results show a very good agreement.

  • PDF

모듈화된 계자코일을 가지는 12 MW급 초전도 발전기의 고장 특성 분석 (Fault characteristic analysis of a modularized HTS field coil-based 12 MW class SCSG)

  • 고병수;성해진;박민원;유인근
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2015년도 제46회 하계학술대회
    • /
    • pp.1108-1109
    • /
    • 2015
  • In general, when a high-temperature superconducting (HTS) field coil breaks down, the overall field coils of a superconducting synchronous generator (SCSG) are also stopped working, because of the HTS field coils are connected in series. Therefore, the HTS field coils have to be modularized. The modularized HTS field coil is operated individually. Therefore, even if the HTS field coils are broken-down, the generator still operates under the fault conditions. But the output power and torque of the generator will be affected. This paper deals with the fault characteristics analysis of a 12 MW class SCSG with the modularized HTS field coils when the coils were broken-down. The steady-state and transient state characteristics of the modularized 12 MW class SCSG were analyzed and compared. The fault characteristics analysis results of the 12 MW class superconducting generator for the wind turbines were discussed in detail.

  • PDF

인공잡음 발생장치를 이용한 초고압 시험선로의 잡음 방사특성 연구 (A Study on the Radiation Characteristics of Noise from HV AC Transmission Lines Using a Gap Noise Generator)

  • 신구용;이동일;김상범
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1999년도 하계학술대회 논문집 E
    • /
    • pp.2041-2043
    • /
    • 1999
  • In order to investigate the radiation characteristics of unmixed line noise from overhead high voltage AC transmission lines, a gap noise generator was manufactured. Disk size which decides capacitance between the noise generator and earth was selected through preliminary indoor experiments and analysis by charge simulation method. The capacitance is one of principal parameters related to inject a proper noise current into lines. The field experiments were performed with the noise generator installed in Kochang 765 kV full scale test line. As the results, the useful data which can be used to analysis the radiation characteristics of noise from transmission lines was obtained. Those are lateral profiles the directivity of antenna toward lines, frequency spectra and so on.

  • PDF

Analysis and Design of Resonant Inverter for Reactive Gas Generator Considering Characteristics of Plasma Load

  • Ahn, Hyo Min;Sung, Won-Yong;Lee, Byoung Kuk
    • Journal of Electrical Engineering and Technology
    • /
    • 제13권1호
    • /
    • pp.345-351
    • /
    • 2018
  • This paper analyzes a resonant inverter to generate plasma. The resonant inverter consists of a full bridge converter, resonant network and reactor to generate a magnetic field for plasma generation. A plasma load has very distinct characteristics compared to conventional loads. The characteristics of plasma load are analyzed through experimental results. This paper presents the study on the resonant network, which was performed in order to determine how to achieve a constant current gain. Another important contribution of this study is the analysis of drop-out phenomenon observed in plasma loads which is responsible for unpredictable shutdown of the plasma generator that requires stable operation. In addition, the design process for the resonant network of a plasma generator is proposed. The validity of this study is verified through simulations and experimental results.

슬롯 수에 따른 100MW급 권선형 동기발전기 발전특성 및 운전특성 비교 (Operation and Generation Characteristic of 100MW-Class Wound Rotor Synchronous Generator According to Number of Slots)

  • 김창우;박요한;최장영
    • 전기학회논문지
    • /
    • 제68권4호
    • /
    • pp.523-531
    • /
    • 2019
  • This paper deals with a wound-field synchronous machines(WFSM), with an electromagnet on its salient rotor, as an alternative to a permanent magnet in the rotor. We then examine the power performance characteristics, loss characteristics, V-curves and large short-circuit ratios for a large-scale synchronous generator, considering the leading and lagging operations, based on the finite-element method. We predict the performance of a 100MVA-class generator based on the operating range for a constant short-circuit ratio. At the last, We compared with the electromagnetic characteristics of three model according to number of slots.

지능형 디지털 재설계 기법을 이용한 원자력 발전소 증기발생기의 강인 제어기 설계 (Design of Robust Controller for the Steam Generator in the Nuclear Power Plant Using Intelligent Digital Redesign)

  • 김주원;박진배;조광래;주영훈
    • 한국지능시스템학회:학술대회논문집
    • /
    • 한국퍼지및지능시스템학회 2002년도 춘계학술대회 및 임시총회
    • /
    • pp.203-206
    • /
    • 2002
  • This paper describes fuzzy control methodologies of the steam generator which have nonlinear characteristics in the nuclear power plant. Actually, the steam generator part of the power generator has a problem to control water level because it has complex components and nonlinear characteristics. In order to control nonlinear terms of the model, Takagj-Sugeno (75) fuzzy system is used to design a controller. In designing procedure, intelligent digital redesign method is used to control the nonlinear system. This digital controller keeps the performance of the analog controller. Simulation examples are included for ensuring the proposed control method.

  • PDF

CE형 증기발생기 전열관의 행열 변화에 따른 유체유발진동 특성 (Characteristics of Flow-induced Vibration for CE Type Steam Generator Tube with Various Column and Row Number)

  • 유기완;조봉호;박치용;박수기
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2002년도 추계학술대회논문집
    • /
    • pp.927-932
    • /
    • 2002
  • The stability ratio and vibrational amplitude of each tube inside a steam generator have different values. We estimate the characteristics of flow-induced vibration for CE type steam generator with various column and row number of the tube. To obtain the thermal-hydraulic data and stability ratio we use the ATHOS3-MODI and PIAT-FEI/TE code respectively. It turns out that the steam generator has a bounded central zone with the distributed values of the stability ratio and the vibrational amplitude, and those values across the zone boundary become decreased.

  • PDF

하드웨어 잡음발생기의 랜덤 특성 분석 (Analysis of Randomness Characteristics of Hardware Noise Generator)

  • 홍진근
    • 한국산학기술학회논문지
    • /
    • 제12권1호
    • /
    • pp.263-267
    • /
    • 2011
  • 본 논문은 하드웨어 잡음원 기반으로 하는 발생기에서 출력되는 정보의 랜덤성 특성을 분석하였다. 또한 발생기 출력열에 라플라시안 필터를 적용하여 보안성을 개선하였다. 먼저 하드웨어 잡음 발생기 출력열의 랜덤성 검증기준을 살펴보고, 라플라시안 필터가 적용된 발생기의 출력열 개선 결과를 제시하였다.

CE형 증기발생기 튜브의 행열 변화에 따른 유체유발진동 특성 (Characteristics of Flow-induced Vibration for CE Type Steam Generator Tube with Various Column and Row Number)

  • Ryu, Ki-Wahn;Cho, Bong-Ho;Park, Chi-Yong;Park, Su-Ki
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2002년도 추계학술대회논문초록집
    • /
    • pp.390.2-390
    • /
    • 2002
  • The stability ratio and vibrational amplitude of each tube inside a steam generator have different values. We estimate the characteristics of flow-induced vibration for CE type steam generator with various column and row number of the tube. To obtain the thermal-hydraulic data and stability ratio we use the ATHOS3 and PIAT-FEI/TE code respectively. It turns out that the steam generator has a bounded central zone which the distributed values of the stability ratio and the vibrational amplitude, and those values across the zone boundary become decreased.

  • PDF