• 구강회복응용과학지
• /
• 제23권3호
• /
• pp.227-237
• /
• 2007

Various methods and torque generating devices are developed and employed to apply proper torque clinically. In this study, clinically used torque control devices are measured whether uniformed and precise torque are generated. Digital torque gauge are employed for measurement and torque driver, torque limiting device, torque indicating device are used for torque generating devices. ${\chi}^2$ distribution was formed and One-way ANOVA(Turkey test) was performed to measure torque values generated by each torque generating device. In the results, all companies have been shown slight errors and deviations. This indicates a difficulty of applying precise torque. Therefore, it would be recommended torque generating device should be checked whether uniformed and precise torque can be generated and an error should be corrected.

• 한국전기전자재료학회논문지
• /
• 제28권2호
• /
• pp.69-74
• /
• 2015

Recently, energy harvesting technology is increasing due to the fossil fuel shortages. Energy harvesting is generating electrical energy from wasted energies as sunlight, wind, waves, pressure, and vibration etc. Energy harvesting is one of the alternatives of fossil fuel. One of the energy harvesting technologies, the piezoelectric energy harvesting has been actively studied. Piezoelectric generating uses a positive piezoelectric effect which produces electrical energy when mechanical vibration is applied to the piezoelectric device. Piezoelectric energy harvesting has an advantage in that it is relatively not affected by weather, area and place. Also, stable and sustainable energy generation is possible. However, the output power is relatively low, so in this paper, newly designed honeycomb shaped piezoelectric energy harvesting device for increasing a generating efficiency. The output characteristics of the piezoelectric harvesting device were analyzed according to the change of parameters by using the finite element method analysis program. One model which has high output voltage was selected and a prototype of the honeycomb shaped piezoelectric harvesting device was fabricated. Experimental results from the fabricated device were compared to the analyzed results. After the AC-DC converting, the power of one honeycomb shaped piezoelectric energy harvesting device was measured 2.3[mW] at road resistance 5.1[$K{\Omega}$]. And output power was increased the number of harvesting device when piezoelectric energy harvesting device were connected in series and parallel.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권3호
• /
• pp.106-112
• /
• 2000

Since the oil crisis, we have been concerned about the energy saving techniques of electric generating systems. As a part of the effort to save energy, automatic electric load sharing device was developed. Usually, ship's electric generating system consists of two or three sets of generator. And, electric generating system is operated as single or parallel operation mode according to the demanded electric power. Therefore, it is important to investigate generators operating mode for the supply of required electric power in the ship in order to decrease the operating cost. So, this paper suggests the method to solve the optimal electric load distribution problem by dynamic programming. And, this thesis indicates that the proposed method is superior to the lagrange multiplier's method in obtaining optimal load distribution solution in the ship's electric generating system.

• 대한디지털의료영상학회논문지
• /
• 제12권2호
• /
• pp.97-101
• /
• 2010

This experimental study is carried out one of the General Hospital in Kyungbok providence. Abdomen Phantom being located Anterior-posterior(AP) position on portable bed, and the portable X-ray generating device was placed the phantom at $-90^{\circ}$ direction. The experiment were set 65 kVp, 10 mAs, $10{\times}10\;cm^2$, 100 cm(FOD) for the measurement. Digital proportional counting tube survey meter was used for measuring the space scatter dose. Measurement points of horizontal distribution was set up at $30^{\circ}$ interval by increasing 50 cm radius of upside, downside, left and right. Vertical distribution of measurement points were set up for the vertical plane with a radius of at $30^{\circ}$ intervals with 50cm increments. It is concluded that longer distance from the soure of X-ray significantly decrease radiation dose to the patient and use of the radiation protection device should be applied in clinical practice to reduce dose to the patient.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.389-392
• /
• 2005

In the maskless photolithography based on the Digital Micromirror Device (DMD) by Texas Instruments Inc. (TI), the micromirror array works as a virtual photomask to write patterns directly onto Flat Panel Display (FPD) at high speed with low cost. However, it is neither simple to generate region-based patterns for the micromirror array nor easy to deliver sequences of patterns for the micromirror controller. Moreover, the quality of lithography yields the precise synchronization between generating sequence of patterns and irradiation rate off micromirrors. In this study, the region-based pattern generating system for maskless photolithography is devised. To verify salient features of devised functionalities, the prototype system is implemented and the system is evaluated with actual DMD based photolithography. The results show that proposed pattern generating method is proper and reliable. Moreover, the devised region-based pattern generating system is robust and precise enough to handle any possible user specified mandate and to achieve the quality of photolithography required by FPD manufacturer.

• 한국소음진동공학회논문집
• /
• 제13권11호
• /
• pp.875-881
• /
• 2003

The received signal of a mobile phone is normally sensed through two independent means which are the sound generation of a speaker and vibration generation of a vibration motor. As an improvement scheme to meet the consumer's demand on weight reduction and miniaturization of a mobile phone, the design and development of an integrated vibration and sound generating device are performed in this research. To this purpose, the optimal shapes of the voice coil. the permanent magnet and the vibration plate are designed, and the excitation force applied to the vibration system of the new device is estimated and verified through theoretical analyses, computer simulation, and experiments using an expanded model. In addition, vibration performance comparison of the device with the existing vibration motor is performed, and from the overall process, therefore, the method and procedure for the vibration performance analysis of the integrated vibration and sound generating device are established.

• Journal of Periodontal and Implant Science
• /
• 제34권3호
• /
• pp.659-669
• /
• 2004

The aim of this study was to evaluate the clinical efficacy of mouthrinses prepared by sterilized water-generating $device(Purister^{(R)})$ on the control of gingivitis and incipient periodontitis when it was used as a adjunctives to the mechanical plaque control. 40 healthy patients with gingivitis or incipient periodontitis were divided into two groups. Patients in the experimental group use mouthrinses prepared by sterilized water-generating $device(Purister^{(R)})$ after tooth brushing while patients in the control group do only tooth brushing for plaque control. All patients received scaling and tooth brushing instruction. 1 week after scaling was set as baseline. Probing pocket depth, clinical attachment level, and bleeding on probing were scored at baseline, 4 weeks. Gingival index and plaque index were scored at baseline, 2 weeks, and 4 weeks. The results were as follows: 1. In the experimental group, gingival index, plaque index, probing pocket depth, and clinical attachment level showed statistically significant decrease, but in the control group, significant increase(p<0.05). 2. There was no significant difference between the experimental and the control group in bleeding on probing, but significant decrease in the experimental group and Significant increase in the control group In a time-dependent manner(p <0.05). From these results, it can be concluded that regular use of mouthrinses prepared by sterilized water-generating $device(Purister^{(R)})$ as adjunctives of mechanical plaque control, may be effective to prevent and treat gingivitis and incipient periodontitis.

• 한국전산구조공학회논문집
• /
• 제23권5호
• /
• pp.559-565
• /
• 2010

지구온난화 증가에 따른 교토협약으로 전 세계적으로 녹색 신 재생에너지에 대한 관심이 증가하고 있다. 본 논문에서는 철도, 도로, 지하철 등 터널 내에서 상상을 초월하는 차량의 진동 소음으로 인한 소모에너지를 음력 발전을 통하여 에너지를 하베스팅 하는 녹색사회기반시설 시스템을 구축하기 위해 전자기유도를 활용한 자체적인 소음발전 디바이스를 적용하여 실제 사회기반시설의 종류별 소음특성에 따른 소음발전 디바이스의 적용성 및 효율성을 분석하였다. 실험결과 소음발전 디바이스는 특정 진동수의 소음에서 최대 전압 및 전력을 나타냈으며, 소음원으로부터의 거리 및 소음의 음압에 따라 발생하는 전압 및 전력이 특정한 관계를 가진다는 사실을 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제35권1호
• /
• pp.98-101
• /
• 2022

Liquid-based Triboelectric nanogenerator (L-TENG) is one of the alternatives to solid-based Triboelectric nanogenerator (S-TENG) because of the absence of surface damage which can decrease the durability of the generator. However, the L-TENG also has an obvious drawback of significantly lower output than that of S-TENG. This article produces water-sloshing-based electricity generating device (W-ED) with a new design of L-TENG that improves electrical output in portable form. The dual-electrode system, consisting of closed-loop circuit and inner electrode which enables water to contact directly in the bottle, can generate the open-circuit voltage and the short-circuit current of up to 348 V and 5.1 mA, respectively. By investigating the motion of water for each frequency, we propose that W-ED is suitable device for a variety of human motions. We expect that W-ED can be applied in small electrical devices or sensors in daily-use items.

• 한국전기전자재료학회논문지
• /
• 제26권8호
• /
• pp.635-639
• /
• 2013

Generating output characteristics of a EYE-type piezoelectric generator depending on ceramic size and materials of the elastic body were studied. EYE-type piezoelectric-generating device consist of the ceramic was attached between the both elastic body. piezoelectric-generating is that if the tension occurred at both ends of an elastic body, the piezoelectric effect occurs at ceramics through the form change of the elastic body. The structure of this EYE-type generator use various area. than a existing type generator, because the ceramic position of the directly force at does not apply. Resonance and output characteristics of the generator were analyzed by using FEM program. Generators were fabricated on the basis of analyzed results and attached on a frequency controllable vibrator to measure output characteristics. Also, the experimental results were compared with the simulated results. As a result, output characteristics of the generator increased depending on the increase in ceramic thickness. In case of increase in ceramic width, resonance frequency of the generator also decreased.