• Title/Summary/Keyword: Generated Data

Search Result 6,856, Processing Time 0.043 seconds

A Study on Flow Characteristics around Foot to Investigate Principle of Underwater Exercise for Rheumatoid Arthritis Patients (류마티스 관절염 환자의 수중운동 원리 규명을 위한 발 주위 유동 특성 연구)

  • Choi, Ji-Hyun;Park, Sung-Young
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.22 no.5
    • /
    • pp.403-410
    • /
    • 2021
  • There are positive effects, such as pain reduction, when rheumatism patients exercise in water, but the cause of the pain reduction is unclear, and research on this is inadequate. This study examined the flow of the surface of the foot and the principles of pain relief. Unsteady simulations were conducted to analyze the flow, which was performed by repeatedly setting the movement of the foot raising and descending three times. Pressure fluctuations and frequencies were analyzed by designating pressure points at the painful location. The results showed that a positive and negative pressure of approximately ±500Pa was applied overall. A pressure of approximately ±2000Pa was applied when the direction of movement was changed. A frequency of approximately 35 to 80Hz was generated in the area where rheumatoid arthritis pain frequently occurs. The effects of reducing pain could be predicted when continuous pressure fluctuations and frequencies are applied repeatedly to the painful location, blood circulation promotion. The results could be used as basic data to understand the principles of aquatic exercise and support the development of underwater exercise programs and developing related medical equipment.

A Study on the Current Status and Characteristics of Fine Dust Generation in Construction Waste Intermediate Treatment Plants and Neighboring Areas (건설폐기물 중간처리 사업장과 인근 지역의 미세먼지 발생 현황 및 특성에 관한 연구)

  • Jang, Kyong-Pil;Song, Tae-Hyeob;Kim, Byung-Yun
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.9 no.4
    • /
    • pp.405-412
    • /
    • 2021
  • The objective of this study is to investigate the environmental impact of fine dust generated at the construction waste intermediate treatment plants, and to propose engineering data and measures to suppress the generation of fine dust to cope with the expected strengthened environmental regulations of the government. The following study conclusions are drawn. 1) T he maximum concentration of fine dust in the workplace was measured as 160㎍/m3 from the crushing operation followed by the point of waste unloading, where focused suppression plan of the fine dust generation is needed in the future. 2) Fine dust concentrations of 113㎍/m3 in wet road conditions and 50㎍/m3 in dry conditions were measured, indicating that fine dust could be reduced by 50% with watering alone. 3) The effect of distancing from the dust source was studied. PM10 during operation of the workplace was measured as about 25㎍/m3 higher than those of the neighboring areas. Whereas there was no significant difference in case of PM2.5 between workplace and neighboring areas. 4) The measurement results of the heavy metal contents showed that these metals did not affect neighboring areas.

Real-time Interactive Animation System for Low-Priced Motion Capture Sensors (저가형 모션 캡처 장비를 이용한 실시간 상호작용 애니메이션 시스템)

  • Kim, Jeongho;Kang, Daeun;Lee, Yoonsang;Kwon, Taesoo
    • Journal of the Korea Computer Graphics Society
    • /
    • v.28 no.2
    • /
    • pp.29-41
    • /
    • 2022
  • In this paper, we introduce a novel real-time, interactive animation system which uses real-time motion inputs from a low-cost motion-sensing device Kinect. Our system generates interaction motions between the user character and the counterpart character in real-time. While the motion of the user character is generated mimicking the user's input motion, the other character's motion is decided to react to the user avatar's motion. During a pre-processing step, our system analyzes the reference motion data and generates mapping model in advance. At run-time, our system first generates initial poses of two characters and then modifies them so that it could provide plausible interacting behavior. Our experimental results show plausible interacting animations in that the user character performs a modified motion of user input and the counterpart character properly reacts against the user character. The proposed method will be useful for developing real-time interactive animation systems which provide a better immersive experience for users.

Design of a Depth Encoding Detector using Light Guides with Different Reflector Patterns for Each Layer (각 층별 반사체 패턴이 서로 다른 광가이드를 사용한 반응 깊이 측정 검출기 설계)

  • Seung-Jae, Lee
    • Journal of the Korean Society of Radiology
    • /
    • v.17 no.1
    • /
    • pp.31-36
    • /
    • 2023
  • Among imaging and treatment devices for small animals, positron emission tomography(PET) causes a change in spatial resolution within a field of view. This is a phenomenon caused by using a small gantry and a thin and long scintillation pixel, and detectors that measure the interaction depth are being developed and researched to solve this problem. In this study, a detector that measures the interaction depth was designed using several scintillator blocks and light guides with different reflector patterns. The scintillator block composed of 4 × 4 arrays of 3 mm × 3 mm × 5 mm scintillation pixels formed four layers, and a light guide was inserted in each layer to configure the entire detector. In order to check whether the interaction depth was measured, a gamma ray interaction was generated at the center of all scintillation pixels to acquire data and then reconstructed into a flood image. The reflector patterns of the light guides inserted between the layers were all different, so the positions of the scintillation pixels for each layer were formed in different locations. It is considered that even spatial resolution can be achieved over all regions of the field of view if all positions of the scintillation pixels thus formed are separated and used for image reconstruction.

Study on the Place Image Factors for Place Branding of Public Libraries (공공도서관의 장소브랜딩을 위한 장소이미지요인에 관한 연구)

  • Yu Jeong, Kang;Jee Yeon, Lee
    • Journal of the Korean Society for Library and Information Science
    • /
    • v.56 no.4
    • /
    • pp.129-159
    • /
    • 2022
  • This study generated primary data for supporting the place branding as a part of the library advertising and marketing strategies to increase public library visits. The literature review enabled the use of the place branding concepts to discover the relationships among the constituent parts, factors, expected outcomes, and loyalty, then to develop the research model and the hypothesis, which were verified using the Structural Equation Model. There were 34 research hypotheses, of which 21 were adopted. The place image factors such as library reliability, library reciprocity, and library safety were found to be significant. This study derived social contribution value as new place value and place image factors as the potential brand image of public libraries. It helped select the place image factors that best fit the local library's core values (i.e., place value). This study is meaningful because it is a fundamental study to introduce place branding in public libraries as an advertising and marketing strategy. And it is expected that public libraries will grow into high-quality brands with high awareness, loyalty, and secure leadership in the local community.

Assessment of Dosimetric Leaf Gap According to Measuring Active Volume of Detector (검출기 측정 용적에 따른 Dosimetric Leaf Gap 변화와 정확성 검증에 대한 연구)

  • Dae-Hyun, Kim
    • Journal of the Korean Society of Radiology
    • /
    • v.16 no.7
    • /
    • pp.863-870
    • /
    • 2022
  • DLG (Dosimetric Leaf Gap) and transmission factor are important parameters of MLC modeling in treatment planning system. In this study, DLG and transmission factor of HD-MLC were measured using detector with different measuring volumes, and the accuracy of the treatment plans was evaluated according to the DLG values. DLG was measured using the dynamic sweeping gap method with Semiflux3D and MicroDiamond detectors. Then, 10 radiation treatment plans were generated to optimize the DLG value and compared with the measurement results. Photon energies 6, 8, 10 MV, the DLG measured by Semiflux3D were 0.76, 0.83, and 0.85 mm, and DLG measured by MicroDiamond were 0.78, 0.86, and 0.9 mm. All plans were measured by portal dosimetry and analyzed using Gamma Evaluation. In the 6 MV photon beams, the average gamma passing rate were 94.3% and 98.4% for DLG 0.78 mm and 1.15 mm. In the 10 MV photon beam, the average gamma passing rate were 91.2% and 97.6% for DLG 0.9 mm and 1.25 mm. HD-MLC needs accurate modeling in the treatment planning system. DLG could be used measured data using small volume detector. However, for better radiation therapy, DLG should be optimized at the commissioning stage of LINAC.

Study on the Aerodynamic Characteristics of an Wing Depending on the Propeller Mounting Position (프로펠러 장착 위치에 따른 날개의 공력 특성 변화 연구)

  • Inseo, Choi;Cheolheui, Han
    • Journal of Aerospace System Engineering
    • /
    • v.16 no.6
    • /
    • pp.54-63
    • /
    • 2022
  • Recently, electric propulsion aircraft with various propeller mounting positions have been under construction. The position of the propeller relative to the wing can significantly affect the aerodynamic performance of the aircraft. Placing the propeller in front of the wing produces a complex swirl flow behind or around the propeller. The up/downwash induced by the swirl flow can alter the wing's local effective angle of attack, causing a change in the aerodynamic load distribution across the wing's spanwise direction. This study investigated the influence of the distance between a propeller and a wing on the aerodynamic loads on the wing. The swirl flow generated by the propeller was modelled using an actuator disk theory, and the wing's aerodynamics were analysed with the VSPAERO tool. Results of the study were compared to wind tunnel test data and established that both axial and spanwise distance between the propeller and the wing positively affect the wing's lift-to-drag ratio. Specifically, it was observed that the lift-to-drag ratio increases when the propeller is positioned higher than the wing.

Numerical Simulation of Ocean - Ice Shelf Interaction: Water Mass Circulation in the Terra Nova Bay, Antarctica (해양-빙붕 상호작용을 고려한 남극 테라노바 만에서 수괴 형성과 순환의 수치 시뮬레이션)

  • Taekyun, Kim;Emilia Kyung, Jin;Ji Sung, Na;Choon Ki, Lee;Won Sang, Lee;Jae-Hong, Moon
    • Ocean and Polar Research
    • /
    • v.44 no.4
    • /
    • pp.269-285
    • /
    • 2022
  • The interaction between ocean and ice shelf is a critical physical process in relation to water mass transformations and ice shelf melting/freezing at the ocean-ice interface. However, it remains challenging to thoroughly understand the process due to a lack of observational data with respect to ice shelf cavities. This is the first study to simulate the variability and circulation of water mass both overlying the continental shelf and underneath an ice shelf and an ice tongue in the Terra Nova Bay (TNB), East Antarctica. To explore the properties of water mass and circulation patterns in the TNB and the corresponding effects on sub ice shelf basal melting, we explicitly incorporate the dynamic-thermodynamic processes acting on the ice shelf in the Regional Ocean Modeling System. The simulated water mass formation and circulation in the TNB region agree well with previous studies. The model results show that the TNB circulation is dominated by the geostrophic currents driven by lateral density gradients induced by the releasing of brine or freshwater at the polynya of the TNB. Meanwhile, the circulation dynamics in the cavity under the Nansen Ice shelf (NIS) are different from those in the TNB. The gravity-driven bottom current induced by High Salinity Shelf Water (HSSW) formed at the TNB polynya flows towards the grounding line, and the buoyance-driven flow associated with glacial meltwater generated by the HSSW emerges from the cavity along the ice base. Both current systems compose the thermohaline overturning circulation in the NIS cavity. This study estimates the NIS basal melting rate to be 0.98 m/a, which is comparable to the previously observed melt rate. However, the melting rate shows a significant variation in space and time.

A Study of Cancer Incidence Rate due to Photoneutron Dose during Radiation Therapy for Prostate Cancer Patients (전립샘암 환자의 방사선 치료 시 광중성자 선량으로 인한 암 발생률의 연구)

  • Lee, Joo-Ah
    • Journal of the Korean Society of Radiology
    • /
    • v.16 no.4
    • /
    • pp.471-476
    • /
    • 2022
  • The purpose of this study was to study the probability of cancer occurrence due to photoneutron dose exposure of the colon and thyroid gland, which are normal organs, in 3D CRT, IMRT 5 portals, and IMRT 9 portals, which are radiotherapy methods for prostate cancer. The total prescribed dose for prostate cancer was 6600 cGy, 220 cGy per dose, and 30 divided irradiations were applied for the total number of times. After setting up the Rando phantom on the treatment table (couch) of the medical linear accelerator used in the experiment, an optically stimulated luminescence albedo neutron dosimeter was placed on the corresponding area of the large intestine and thyroid gland of the phantom for measurement. During 3D CRT of prostate cancer, the probability of secondary cancer due to photoneutron dose to the colon and thyroid gland, which are normal organs, was 1.8 per 10,000 people. And IMRT 5 portals were 8.7 per 10,000 people, which was about 5 times larger than 3D CRT. IMRT 9 portals derived the result that there is a probability that 1.2 people per 1,000 people will develop cancer. Based on this study, the risk of secondary radiation exposure due to the dose of photoneutrons generated during radiation therapy is studied, and it is thought that it will be used as useful data for radiation protection in relation to the stochastic effect of radiation in the future.

Development of Block-based Code Generation and Recommendation Model Using Natural Language Processing Model (자연어 처리 모델을 활용한 블록 코드 생성 및 추천 모델 개발)

  • Jeon, In-seong;Song, Ki-Sang
    • Journal of The Korean Association of Information Education
    • /
    • v.26 no.3
    • /
    • pp.197-207
    • /
    • 2022
  • In this paper, we develop a machine learning based block code generation and recommendation model for the purpose of reducing cognitive load of learners during coding education that learns the learner's block that has been made in the block programming environment using natural processing model and fine-tuning and then generates and recommends the selectable blocks for the next step. To develop the model, the training dataset was produced by pre-processing 50 block codes that were on the popular block programming language web site 'Entry'. Also, after dividing the pre-processed blocks into training dataset, verification dataset and test dataset, we developed a model that generates block codes based on LSTM, Seq2Seq, and GPT-2 model. In the results of the performance evaluation of the developed model, GPT-2 showed a higher performance than the LSTM and Seq2Seq model in the BLEU and ROUGE scores which measure sentence similarity. The data results generated through the GPT-2 model, show that the performance was relatively similar in the BLEU and ROUGE scores except for the case where the number of blocks was 1 or 17.